***************************************************************************** * * * 32-Bit PCI Fast Ethernet Adapter * * * * ODI Driver for DOS Workstation * * * ***************************************************************************** Installation: ============= Driver Installation with existing Netware client programs: ---------------------------------------------------------- A) Using NETX.EXE: If there are Netware client programs such as LSL.COM, IPXODI, and NETX.EXE in your system already, you can use the following procedures to setup your system. 1. Copy the A:\NETWARE\DOSODI\RTSODI.COM file to the Netware client directory which contains NET.CFG, LSL.COM, IPXODI.COM, and NETX.EXE files. 2. Update the NET.CFG file. You can refer to the NET.CFG sample. 3. Make sure to add LASTDRIVE=E in your CONFIG.SYS file if your want the first network drive to be F. 4. Enter the following commands to connect to your Novell server: LSL RTSODI IPXODI NETX F: LOGIN <user_name> B) Using VLM.EXE: If there are Netware client programs such as: LSL.COM, IPXODI, and VLM.EXE in your system already, you can use the following procedures to setup your system. 1. Copy the A:\NETWARE\DOSODI\RTSODI.COM file to the Netware client directory which contains NET.CFG, LSL.COM, IPXODI.COM, and VLM.EXE with related *.VLM files. 2. Update the NET.CFG file. You can refer to the NET.CFG sample. 3. Make sure to add LASTDRIVE=Z in your CONFIG.SYS file. 4. Enter the following commands to connect to your Novell server: LSL RTSODI IPXODI VLM F: LOGIN <user_name> NOTE: ----- Multiple LAN Adapters in a system: If you want to install mutiple LAN adapter in your system, you have to use "BUSNO" and "DEVICENO" keyword in NET.CFG to select which adapter to use with your netware client.(or you can use "EtherID") You can use the diagnostic program (A:\SETUP.EXE) under DOS prompt to show all the Ethernet addresses of your adapters. Configuration Files: ==================== File Name: NET.CFG ---------- Sample of configuration file: ----------------------------- . . . Link Driver RTSODI FRAME Ethernet_802.2 FRAME Ethernet_802.3 FRAME Ethernet_II FRAME Ethernet_SNAP ODI Driver Custom Keywords -------------------------- Specify adapter's medium which identifys adapter's speed and duplex mode. There are five medium values: AUTO, 10HALF, 10FULL, 100HALF, 100FULL. MEDIUM AUTO ;operate on auto negotiation mode MEDIUM 10HALF ;operate on 10M/HalfDuplex mode MEDIUM 10FULL ;operate on 10M/Fullduplex mode MEDIUM 100HALF ;operate on 100M/HalfDuplex mode MEDIUM 100FULL ;operate on 100M/Fullduplex mode Use the following two methods to specify the selected adapter when using two or more cards in a machine. (for Multiple Cards) --------------------------------------------------------------- (1) Use the PCI Bus Number and the PCI Device Number (You can get these numbers from the "View Current Configuration" of the Setup program (SETUP.EXE).) BUSNO 0 DEVICENO 10 (2) Use the Node Address ETHERID 0000E8123456 ---- All trademarks or brand names mentioned are properties of their respective companies.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.