Workstation for Novell NetWare Client 32 for DOS/Windows 3.1X
Introduction:
-------------
This document describes the procedure to setup the NetWare Client 32 for
DOS/Windows 3.1X ODI driver for AcerLAN ALN-201 PCI Ethernet adapter.
Location of Driver: \NWSERVER\ALN201.LAN
\NWSERVER\ALN201.LDI
Sample Configuration Files:
---------------------------
STARTNET.BAT:
SET NWLANGUAGE=ENGLISH
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\ALN201.LAN SLOT=2 FRAME=Ethernet_802.2
LOAD C:\NOVELL\CLIENT32\ALN201.LAN SLOT=2 FRAME=Ethernet_802.3
LOAD C:\NOVELL\CLIENT32\ALN201.LAN SLOT=2 FRAME=Ethernet_II
LOAD C:\NOVELL\CLIENT32\ALN201.LAN SLOT=2 FRAME=Ethernet_SNAP
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
Simple setup Procedures for NetWare Client 32 for DOS/Windows 3.1X :
-----------------------------------------------
Before you start with the installation process, make sure that
the adapter is properly installed. Make sure that your
NetWare Client 32 for DOS/Windows 3.1X operating system is properly
installed.
1. Copy ALN201.LAN and ALN201.LDI from the AcerLAN Driver Diskette
subdirectory A:\NWSERVER to your \NOVELL\CLIENT32 subdirectory.
2. Modify a batch file the commands listed above under
STARTNET.BAT
3. Run the batch file.
Setup Procedures for NetWare Client 32 for DOS/Windows 3.1X :
-------------------------------------------------------------
The installation utility INSTALL.EXE is located on Novell's
"Netware Client 32 for DOS/Windows 3.1X" disk 1. Run INSTALL
from the DOS prompt.
The NetWare Client 32 Install program screen will appear. You must
complete each of the questions. These options are specific to your
needs.
1. In 32-bit Network Board Drivers dialog box, select OTHER DRIVERS
option.
2. Insert AcerLAN ALN-201 Driver Diskette into A: and type
A:\NWSERVER.
3. Select AcerLAN ALN-201 PCI Ethernet Driver option and finish
NetWare Client 32 for DOS/Windows 3.1X installation procedure.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.