LGEAC10.INF Driver File Contents (Install_and_more.zip)

; Copyright (c) 1993-1995 Microsoft Corporation
; This file is intented for use with the Future Domain IDE16000 controller
; card that is distributed with the GoldStar CD-ROM Drive.  This file allows
; the Port Address and IRQ of the controller card to be manually set if the
; standard IDE Controller does not work with this card.
; 4/25/96  L.G. Electronics Alabama Inc.
;

[version]
signature="$CHICAGO$"
Class=hdc
Provider=%MS%

;Class Install
[ClassInstall]
AddReg=HDC_Class

[HDC_Class]
HKR,,,,%HDCClassName%
HKR,,Icon,,-9

[Manufacturer]
%GOLDSTAR%=LGE_HDC

[LGE_HDC]
%GOLDSTAR.DeviceDesc%   = LGE_IDE,*LGE0001      ;Goldstar EIDE-CDROM 
                                         ;Future Domain IDE-16000 controller

[*lge0001.det]          ;ESDI Controller
LogConfig=esdilc1,esdilc2
AddReg = HDC_HW_REG

[esdilc1] 
ConfigPriority=HARDWIRED
IOConfig=1f0-1f7(3ff::)
IOConfig=3f6-3f6(3ff::)
IRQConfig=S:14

[esdilc2]
ConfigPriority=HARDWIRED
IOConfig=170-177(3ff::)
IOConfig=376-376(3ff::)
IRQConfig=S:15

[BAD_IDE] 
LogConfig=esdilc1,esdilc2
AddReg = ESDI_AddReg

[LGE_IDE]
LogConfig=*goldstar.LogConfig
AddReg = ESDI_AddReg

[*goldstar.LogConfig]
ConfigPriority=HARDRECONFIG
IRQconfig=10,15
IOConfig= 168-16f, 170-17f
IOConfig= 36e-36f, 376-376

[BAD_IDE.PosDup] 
*lge0001

[GOOD_IDE]
LogConfig=esdilc1,esdilc2
AddReg = ESDI_AddReg

[GOOD_IDE.HW]
AddReg = ESDI_FIFO_OK_AddReg

[GOOD_IDE.PosDup]
*lge0001

 
[ESDI_FIFO_OK_AddReg]
HKR,,IDENoSerialize,3,01

[ESDI_AddReg]
HKR,,DriverDesc,,"ESDI Port Driver"
HKR,,DevLoader,,*IOS
HKR,,PortDriver,,ESDI_506.pdr

[HDC_HW_REG]
HKR,,NoSetupUI,,1

[ControlFlags]
ExcludeFromSelect=MF\BADPRIMARY,MF\BADSECONDARY,MF\GOODPRIMARY,MF\GOODSECONDARY


[Strings]
HDCClassName            = "Hard disk controllers"
GOLDSTAR.DeviceDesc     = "Acculogic IDE Controller (sIDE-2/CD) "
GOLDSTAR="LG Electronics"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.43