1. mm120d1.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (mm120d1.exe)

=============================================================================
			README.TXT for MultiMode 120
			       October 8, 1991
=============================================================================

	This file contains information not available at the time the
	manuals were printed.  Please read it carefully.


VersaCAD 5.4 Driver Not Yet Available
=====================================

	The display driver for VersaCAD 5.4 was not available at the
	time of MultiMode 120's release.  If you require this driver,
	please contact the Sigma Designs Product Support Dept. at
	(510) 770-0100.  Your name will be put on a waiting list for
	this driver and it will be shipped to you automatically when
	it becomes available.


Updating or Changing the Windows 3.0 Driver
===========================================

	The Windows SETUP program does not overwrite files with the
	same filename during driver installation.  If the MultiMode
	120 Windows driver is already installed and you want to
	change the driver or update it to a later version, the old
	driver files must be deleted before running the Windows SETUP
	program.  These driver files are normally deleted by the
	MultiMode 120 Installation Utility.  If you are bypassing
	the MultiMode 120 Installation Utility and are installing the
	driver files directly from the floppy drive, you must delete
	the old driver files before running the Windows SETUP program.
	The filenames of these driver files are:

		WIN30SML.DRV or WIN30BIG.DRV
		WIN30MM.GR2
		WIN30MM.386
		WIN30MM.LGO
		WIN30MM.RLE


Running Windows 3.0 at Memory Page A000:0
=========================================

	If you are running the MultiMode 120 at memory page A000:0
	with Windows 3.0, and are running non-Windows applications
	in the MultiMode 120 high resolution mode (such as WordPerfect
	5.1 in print preview mode), do not use the Alt-Esc or Alt-Tab
	key combinations to switch to Windows.  Instead, exit out of
	the high resolution before using the key combinations to
	switch to Windows.

	This limitation does not exist if you are running at the
	default memory page of D000:0.


Using the Print Preview in Microsoft Excel
==========================================

	If you are using the Print Preview mode of Microsoft Excel
	on the MultiMode 120, please refrain from using the Helvetica
	12 point font.  This font causes an Unrecoverable Applications
	Error if viewed in the portrait mode of Print Preview.


Microsoft Excel Status Line Colors
==================================

	If you are using Microsoft Excel, you may notice some white
	boxes in the Excel status line (right above the horizontal
	scroll-bar).  This can be corrected by adding the following
	two lines into the WIN.INI file in the Windows directory:

	[colors]
	ButtonFace=255 255 255

	You can edit the WIN.INI file with the Windows NotePad or
	any ASCII text editor.


Running Windows 3.0 in Standard Mode
====================================

	If you use Windows 3.0 in Standard mode, please refrain from
	using the 132x66 high resolution text mode.  A problem occurs
	when switching from Windows to non-Windows applications using
	the 132x66 mode.  The 132x66 is the only high resolution mode
	affected.  Other high resolution text modes do not have this
	problem.


Running DOS Within a Window in 386 Enhanced Mode
================================================

	If you are running DOS in window under Windows 3.0 386
	Enhanced Mode, you will notice that the cursor disappears
	when it reaches the bottom of the DOS screen.  Type "CLS"
	and the cursor will return to the top of the screen.