[Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA MCA PCI "Jazz-Internal Bus" [LanguagesSupported] ENG [Options] CPQPCI [OptionsTextENG] CPQPCI = "Compaq Ethernet or Fast Ethernet NIC" [FileConstants] NDIS3Name = "N100" NDIS4Name = "N100NT" ExeName = "CPQSET" Sp1Name = "CP100DG" Sp3Name = "CPQDGD" KddName = "CPQKDD" ProdHelp = "N100SET" DllName = "CP100" AftName = "QNFT" Manufacturer = "Compaq" ProductSoftwareName = "N100" ProductSoftwareTitle = "Compaq Ethernet or Fast Ethernet NIC Driver" ProductSoftwareImagePathNDIS3 = "%SystemRoot%\System32\drivers\n100.sys" ProductSoftwareImagePathNDIS4 = "%SystemRoot%\System32\drivers\n100nt.sys" NetRuleSoftwareType = "N100Sys ndisDriver N100Driver" NetRuleSoftwareBindForm = """N100Sys"" yes no container" NetRuleSoftwareClass = {"N100Driver basic"} NetRuleSoftwareBindable = {"N100Driver N100Adapter non exclusive 100"} ImagePathNDIS3 = "\SystemRoot\System32\drivers\n100.sys" ImagePathNDIS4 = "\SystemRoot\System32\drivers\n100nt.sys" Configure = "DIAG100_Configure" Detect = "DIAG100_Detect" Diagnose = "DIAG100_Diagnose" DLL = "CP100.DLL" RegistryKey = "DIAG100_GetRegistryKey" Summary = "DIAG100_Resource_Summary" AdapterDescription = "DIAG100_GetAdapterDescription" InstallAnyway = "DIAG100_InstallAnyway" DeviceExist = "DIAG100_DeviceExist" GetExtendedFeatures = "DIAG100_GetExtendedFeatures" Adapter = "Compaq" Help = "N100SET.HLP" OEMOption = "CPQPCI" ExeKeyName = $(!NTN_ServiceBase)"\CPQSET" ExeAdapterName = "CP100" ExeParameters = "Parameters" ProductHardwareName = "N100" ProductHardwareTitle = "Compaq Ethernet or Fast Ethernet NIC" ProductHardwareDescription = "Compaq Ethernet or Fast Ethernet NIC" NetRuleHardwareType = "N100 N100Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"N100Adapter basic"} ProductHardwareCPQPCITitle = "Compaq Ethernet or Fast Ethernet NIC" ProductHardwareCPQPCIDescription = "Compaq Ethernet or Fast Ethernet NIC" FuncTitle = "Compaq Ethernet or Fast Ethernet NIC Setup" ProdSoftwareDescription = "Compaq Ethernet or Fast Ethernet NIC Driver" ProdHardwareDescription = "Compaq Ethernet or Fast Ethernet NIC" Disk1 = "Compaq Configuration and Driver Disk" FTSoftwareTitle = "Compaq Network Fault Tolerance NDIS Miniport Driver" FTSoftwareDescription = "Compaq Network Fault Tolerance NDIS Miniport Driver Description" FTTransportTitle = "Compaq Network Fault Tolerance Module" FTTransportDescription = "A software module that provides Compaq Network Fault Tolerance capability to your Compaq controller." FTHardwareTitle = "Compaq Network Fault Tolerance Team" FTHardwareDescription = "A team of Compaq controllers working together to provide high availability, fail safe network operation." FTSoftwareImagePath = "\SystemRoot\System32\drivers\qnft.sys" FTSoftwareName = "qNFT" FTNetRuleSoftwareType = "qnftSys intermediateDriver" FTNetRuleSoftwareBindForm = """qnftSys"" yes no container" FTTransportName = "qNFTProtocol" FTNetRuleTransportBindForm = "qNFTProtocol yes yes container" FTHardwareName = "qNFT" FTNetRuleHardwareType = "qNFT virtualAdapter" Path = "NT\" BusNumber = "0,7,BusNumber,0,2,0,0,16,1" BusType = "0,7,BusType,0,2,5,2,5,1" BusTypeLocal = "0,7,BusTypeLocal,0,2,5,2,5,1" Eid = "0,7,Eid,0,2,0,0,4294967295,1" Enhanced = "1,4,Enhanced Mode,0,1,On,Off,On" Fifo = "0,3,Fifo Depth,0,2,12,0,15,1" ForceDpx = "1,4,Duplex Mode,0,1,Auto,Auto,Half,Full" MediaType = "0,7,MediaType,0,2,1,1,1,1" MsPciScan = "0,4,MsPciScan,0,2,1,0,1,1" NumCoalesce = "1,7,Coalesce Buffers,0,2,8,1,32,1" NumRfd = "1,7,Receive Buffers,0,2,32,1,1024,1" NumTbd = "0,3,Transmit Buffer Descriptors,0,2,64,1,65535,1" NumTbdPerTcb = "0,4,Transmit Buffers per Frame,0,2,12,1,16,1" NumTcb = "1,7,Transmit Control Blocks,0,2,16,1,80,1" Off = "1,3,Off Timer,0,2,2,1,65535,1" On = "1,3,On Timer,0,2,32768,1,65535,1" RxDmaCount = "0,4,RxDmaCount,0,2,0,0,63,1" RxFifo = "0,4,Receive Fifo Depth,0,2,8,0,15,1" SlotNumber = "0,7,SlotNumber,0,2,0,0,16,1" Speed = "1,7,Network Speed,0,4,Auto,Auto,0,10Mbps,10,100Mbps,100" Threshold = "0,7,Transmit Threshold,0,2,16,0,200,1" TxDmaCount = "0,4,TxDmaCount,0,2,0,0,63,1" TxFifo = "0,4,Transmit Fifo Depth,0,2,8,0,15,1" UnderrunRetry = "0,4,UnderrunRetry,0,2,1,0,3,1" PerfOptims = "0,4,PerfOptims,0,2,0,0,65535,1" UcodeSW = "0,7,UcodeSW,0,2,1,0,1,1" Adaptive_IFS = "1,7,Adaptive Inter-Frame Spacing,0,2,1,0,255,1" Txmitwait = "0,7,Txmitwait,0,2,1,0,255,1" OLD_1BYTE = 139 OLD_2BYTE = 98 NETCARD_ID = 25227 ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetRuleSoftwareUse = $(SoftwareType) NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" ProductMajorVersion = "3" ProductMinorVersion = "0" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ATeamSoftwareType = "driver" ProductATeamMajorVersion = "4" ProductATeamMinorVersion = "0" ProductATeamSoftwareTitle = $(FTSoftwareTitle) ProductATeamSoftwareDescription = $(FTSoftwareDescription) ProductATeamTransportTitle = $(FTTransportTitle) ProductATeamTransportDescription = $(FTTransportDescription) ProductATeamHardwareTitle = $(FTHardwareTitle) ProductATeamHardwareDescription = $(FTHardwareDescription) ProductATeamSoftwareImagePath = $(FTSoftwareImagePath) NetRuleATeamSoftwareReview = 1 ProductATeamSoftwareName = $(FTSoftwareName) NetRuleATeamSoftwareType = $(FTNetRuleSoftwareType) NetRuleATeamSoftwareUse = $(SoftwareType)" none none" NetRuleATeamSoftwareBindForm = $(FTNetRuleSoftwareBindForm) NetRuleATeamSoftwareClass = { + "intermediateDriver ndisDriver yes" + } NetRuleATeamSoftwareBindable = { + "intermediateDriver virtualAdapter non exclusive 100", + } ProductATeamTransportName = $(FTTransportName) NetRuleATeamTransportType = "multispan intermediateTransport" NetRuleATeamTransportUse = "transport none none" NetRuleATeamTransportBindForm = $(FTNetRuleTransportBindForm) NetRuleATeamTransportClass = { + "intermediateTransport basic yes", + } NetRuleATeamTransportBindable = { + "intermediateTransport ndisDriver non non 100", + } ProductATeamHardwareName = $(FTHardwareName) NetRuleATeamHardwareType = $(FTNetRuleHardwareType) NetRuleATeamHardwareClass = {"virtualAdapter basic"} NetRuleATeamHardwareBindForm = " yes yes container" ATeamTransportKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductATeamTransportName)"\CurrentVersion" ATeamTransportParamKeyName = $(!NTN_ServiceBase)"\"$(ProductATeamTransportName)"\Parameters" ProductATeamKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductATeamSoftwareName)"\CurrentVersion" EE16_1BYTE = 139 EE16_2BYTE = 98 NETCARD_ID = 25227 [Files-Inf] 1, oemsetup.inf, SIZE=50000, RENAME=$(!UG_Filename) [Files-N3NDIS3] 1, $(Path)$(NDIS3Name).SY_, SIZE=50000, RENAME=$(NDIS3Name).SYS [Files-N3NDIS4] 1, $(Path)$(NDIS4Name).SY_, SIZE=50000, RENAME=$(NDIS4Name).SYS 1, $(Path)$(AftName).SY_, SIZE=50000, RENAME=$(AftName).SYS [Files-Exe] 1, $(Path)$(ExeName).EX_, SIZE=50000, RENAME=$(ExeName).EXE 1, $(Path)$(ExeName).CP_, SIZE=50000, RENAME=$(ExeName).CPL 1, $(Path)$(Sp1Name).DL_, SIZE=50000, RENAME=$(Sp1Name).DLL 1, $(Path)$(ProdHelp).HL_, SIZE=50000, RENAME=$(ProdHelp).HLP 1, $(Path)$(DllName).DL_, SIZE=50000, RENAME=$(DllName).DLL [Files-Exe-Drivers] 1, $(Path)$(Sp3Name).SY_, SIZE=50000, RENAME=$(Sp3Name).SYS 1, $(Path)$(KddName).SY_, SIZE=50000, RENAME=$(KddName).SYS [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = $(FuncTitle) ProductSoftwareDescription = $(ProdSoftwareDescription) ProductHardwareDescription = $(ProdHardwareDescription) ConnectionList = {} ConnectionValues = {} [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Source Media Descriptions] 1 = $(Disk1), TAGFILE = CPQDISK [Signature] FileType = MICROSOFT_DRVLIB_FILE [GetSignature] read-syms Signature return $(FileType) [Identify] read-syms Identification set !G:DebugOutputControl = 1 set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set !G:DebugOutputControl = 1 set Status = STATUS_FAILED set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set CurrentVersionValue = "" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyWinNT ifstr(i) $(KeyWinNT) != "" GetRegValue $(KeyWinNT) "CurrentVersion" CurrentVersionValue CloseRegKey $(KeyWinNT) endif set m_WinNTVersion = *($(CurrentVersionValue),4) set to = Begin set from = Begin ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"} Shell $(UtilityInf), GetBusTypeNum ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif Set PlatformList = ^(PlatformsSupported, 1) Set MachineType = *($(PlatformList), $($R1)) else Set MachineType = $(!STF_BUSTYPE) endif set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + Set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set ActivateDetection = TRUE set StartLabel = configureadapter ifstr(i) $(MachineType) == "MCA" Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE else Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set ActivateDetection = TRUE set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif Set DetectedCard = FALSE Ifstr(i) $(ActivateDetection) != TRUE Goto $(StartLabel) Endif ifstr(i) $(MachineType) == "MCA" goto CheckForMCA endif set IRQValue = *($(IRQList), 2) set IOAddrValue = *($(IOAddrList), 1) set IOReadyValue = *($(IOReadyList), 2) set TransceiverValue = *($(TransceiverList), 4) Ifstr(i) $(!STF_NCDETECT) == YES Ifstr(i) $(!STF_NCOPTION) == $(Option) Set DetectedCard = TRUE Endif Endif Shell "" DebugConfiguration "After parameter querying" Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) != "OK" goto end endif set OldVersionExisted = $(TRUE) endif endif ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"} Ifstr(i) $(DetectedCard) != TRUE Goto adaptersetup Endif else Goto adaptersetup end CheckForMCA = + StartWait Shell $(UtilityInf), MCAFindBus, $(EE16_1BYTE), $(EE16_2BYTE) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto CheckForISA endif ifstr $($R0) != "NO_ERROR" goto CheckForISA endif ifstr(i) $($R1) == {} set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = "end" goto nonfatal endif set AdapterList = $($R1) goto skipoptions CheckForISA = + Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait Ifstr(i) $($R0) != STATUS_SUCCESSFUL Goto adaptersetup Endif Set DetectedParams = $($R1) Shell $(ParamInf) Param_SetDefaults $(DetectedParams) goto adaptersetup configureadapter = + ifstr(i) $(Option) == "ATEAMADAPTER" Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry Endif Endif GetRegValue $(KeyProduct),"ServiceName", AdapterServiceKey set AdapterServiceKey = *($(AdapterServiceKey),4) LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\cp100.dll DllLibHandle LibraryProcedure DllExitStr $(DllLibHandle) AftCM FreeLibrary $(DllLibHandle) ifstr(i) $(DllExitStr) == "nochange" CloseRegKey $(AdapterServiceKey) CloseRegKey $(KeyProduct) set CommonStatus = STATUS_NO_EFFECT goto successful endif Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry Endif Endif Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Goto fatalregistry endif Set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "CheckTime" set CheckTimeValue = $(ValueData) else-ifstr(i) $(ValueName) == "DisableTime" set DisableTimeValue = $(ValueData) else-ifstr(i) $(ValueName) == "IdleTime" set IdleTimeValue = $(ValueData) else-ifstr(i) $(ValueName) == "ProbeTime" set ProbeTimeValue = $(ValueData) endif EndForListDo Shell $(ParamInf) Param_SaveValues Set CurrParamSettings = $($R0) goto writeparameters endif Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry Endif Endif GetRegValue $(KeyProduct),"ServiceName", AdapterServiceKey set AdapterServiceKey = *($(AdapterServiceKey),4) Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Goto fatalregistry endif Set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} ifstr(i) $(Option) == $(OEMOption) goto RunExecutable goto successful RunExecutable = + RunProgram ExitCode "" "" $(!STF_WINDOWSSYSPATH)\$(ExeName).EXE $(AdapterServiceKey) Ifstr(i) $(!NTN_InstallMode) != configure ifint $(ExitCode) == 20 set Option = "ATEAMADAPTER" goto install_ateam endif ifint $(ExitCode) >= 2 set CommonStatus = STATUS_USERCANCEL goto abandon endif else ifint $(ExitCode) == 0 set CommonStatus = STATUS_NO_EFFECT endif ifint $(ExitCode) == 2 set CommonStatus = STATUS_NO_EFFECT endif ifint $(ExitCode) == 20 set Option = "ATEAMADAPTER" goto install_ateam endif endif goto successful adaptersetup = + Shell "" DebugConfiguration "before displaying dialog" Shell "" DebugConfiguration "After List Translation" Shell $(ParamInf) Param_ParameterConfidence Ifstr(i) $($R0) != STATUS_SUCCESSFUL Goto adapteroptions Endif Ifstr(i) $(DetectedCard) == TRUE Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM Goto adapterverify Endif Endif adapteroptions = + Set from = adapteroptions adapterverify = + ifcontains(i) $(m_WinNTVersion) not-in {"3.50", "3.51"} Goto skipoptions endif Shell "" DebugConfiguration "after running dialog" Ifstr(i) $(DetectedCard) != TRUE Goto skipoptions Endif Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Goto skipoptions Endif Set from = adapteroptions Set to = skipoptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto Warning install_ateam = + ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"} Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "This feature requires Windows NT 4.0 and higher." goto end endif set CheckTimeValue = 1000 set DisableTimeValue = 8000 set IdleTimeValue = 2000 set ProbeTimeValue = 1000 OpenRegKey $(!REG_H_LOCAL) "" $(ProductATeamKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) CloseRegKey $(KeyProduct) Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), $(ProductATeamSoftwareName), $(ProductATeamSoftwareName), + $(ProductATeamSoftwareTitle), $(STF_CONTEXTINFNAME), $(ProductATeamSoftwareImagePath), + "kernel", "NDIS", {}, "", $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = { {SoftwareType, $(NoTitle), $(!REG_VT_SZ), $(ATeamSoftwareType)},+ {MajorVersion, $(NoTitle), $(!REG_VT_DWORD), $(ProductATeamMajorVersion)},+ {MinorVersion, $(NoTitle), $(!REG_VT_DWORD), $(ProductATeamMinorVersion)},+ {Title, $(NoTitle), $(!REG_VT_SZ), $(ProductATeamSoftwareTitle)},+ {Description, $(NoTitle), $(!REG_VT_SZ), $(ProductATeamSoftwareDescription)},+ {ServiceName, $(NoTitle), $(!REG_VT_SZ), $(ProductATeamSoftwareName)},+ {InstallDate, $(NoTitle), $(!REG_VT_DWORD), *($(Now),1)} } Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = { {type, $(NoTitle), $(!REG_VT_SZ), $(NetRuleATeamSoftwareType)},+ {use, $(NoTitle), $(!REG_VT_SZ), $(NetRuleATeamSoftwareUse)}, + {bindform, $(NoTitle), $(!REG_VT_SZ), $(NetRuleATeamSoftwareBindForm)}, + {class, $(NoTitle), $(!REG_VT_MULTI_SZ), $(NetRuleATeamSoftwareClass)}, + {bindable, $(NoTitle), $(!REG_VT_MULTI_SZ), $(NetRuleATeamSoftwareBindable)}, + {InfOption,$(NoTitle), $(!REG_VT_SZ), $(Option)} } Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait goto fatalregistry endif else CloseRegKey $(KeyProduct) endif OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductATeamTransportName)"\CurrentVersion" $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) CloseRegKey $(KeyProduct) Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), $(ProductATeamTransportName), $(ProductATeamTransportName), + $(ProductATeamTransportTitle), $(STF_CONTEXTINFNAME), $(ProductATeamSoftwareImagePath), + "transport", "Transport", {}, "", $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = { {SoftwareType, $(NoTitle), $(!REG_VT_SZ), "transport" }, + {MajorVersion, $(NoTitle), $(!REG_VT_DWORD), $(ProductATeamMajorVersion)},+ {MinorVersion, $(NoTitle), $(!REG_VT_DWORD), $(ProductATeamMinorVersion)},+ {Title, $(NoTitle), $(!REG_VT_SZ), $(ProductATeamTransportTitle)},+ {Description, $(NoTitle), $(!REG_VT_SZ), $(ProductATeamTransportDescription)},+ {ServiceName, $(NoTitle), $(!REG_VT_SZ), $(ProductATeamTransportName)},+ {InstallDate, $(NoTitle), $(!REG_VT_DWORD), *($(Now),1)} + {Review, $(NoTitle), $(!REG_VT_DWORD), 1 }, + {OperationsSupport, $(NoTitle), $(!REG_VT_DWORD), 128} } Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = { {type, $(NoTitle), $(!REG_VT_SZ), $(NetRuleATeamTransportType)},+ {use, $(NoTitle), $(!REG_VT_SZ), $(NetRuleATeamTransportUse)}, + {bindform, $(NoTitle), $(!REG_VT_SZ), $(NetRuleATeamTransportBindForm)}, + {class, $(NoTitle), $(!REG_VT_MULTI_SZ), $(NetRuleATeamTransportClass)}, + {bindable, $(NoTitle), $(!REG_VT_MULTI_SZ), $(NetRuleATeamTransportBindable)}, + {InfOption, $(NoTitle), $(!REG_VT_SZ), $(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait goto fatalregistry endif else CloseRegKey $(KeyProduct) endif Shell $(UtilityInf), AddHardwareComponent, $(ProductATeamHardwareName),$(STF_CONTEXTINFNAME),$(ProductATeamKeyName) set FTRegKeyName = $($R5) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = { {Manufacturer, $(NoTitle), $(!REG_VT_SZ), $(Manufacturer)},+ {Title, $(NoTitle), $(!REG_VT_SZ), "["$($R4)"] "$(ProductATeamHardwareTitle)},+ {Description, $(NoTitle), $(!REG_VT_SZ), $(ProductATeamHardwareDescription)},+ {ProductName, $(NoTitle), $(!REG_VT_SZ), $(ProductATeamHardwareName)},+ {ServiceName, $(NoTitle), $(!REG_VT_SZ), $($R5)},+ {InstallDate, $(NoTitle), $(!REG_VT_DWORD),*($(Now),1)} } Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductATeamHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleATeamHardwareBindForm) set NewValueList = { {type, $(NoTitle), $(!REG_VT_SZ), $(NetRuleATeamHardwareType)},+ {bindform, $(NoTitle), $(!REG_VT_SZ), $(TempBindForm)}, + {class, $(NoTitle), $(!REG_VT_MULTI_SZ), $(NetRuleATeamHardwareClass)}, + {InfOption, $(NoTitle), $(!REG_VT_SZ), $(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) Set TeamTypeValue = $(ProductSoftwareName) Set NewValueList = {+ {CheckTime, $(NoTitle), $(!REG_VT_DWORD), $(CheckTimeValue)},+ {DisableTime, $(NoTitle), $(!REG_VT_DWORD), $(DisableTimeValue)},+ {IdleTime, $(NoTitle), $(!REG_VT_DWORD), $(IdleTimeValue)},+ {ProbeTime, $(NoTitle), $(!REG_VT_DWORD), $(ProbeTimeValue)},+ {TeamType, $(NoTitle), $(!REG_VT_SZ), $(TeamTypeValue)},+ } Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\cp100.dll DllLibHandle LibraryProcedure DllExitStr $(DllLibHandle) AftCM FreeLibrary $(DllLibHandle) goto writeparameters skipoptions = + ifstr(i) $(Option) == "ATEAMADAPTER" goto install_ateam endif ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"} Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePathNDIS3), "kernel", "NDIS", {}, "",+ $(NetEventDLL) else Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePathNDIS4), "kernel", "NDIS", {}, "",+ $(NetEventDLL) endif Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait goto fatalregistry endif endif set NTDetected = $(TRUE) set Vendor = 32902 set CFID = 4649 set SubVendorID1 = 3601 set SubSystemID1 = 45086 set SubVendorID2 = 32902 set SubSystemID2 = 45103 set !G:DebugOutputControl = 0 Shell "", CheckPCISubVendorSystemID $(Vendor) $(CFID) $(SubVendorID1) $(SubSystemID1) $(SubVendorID2) $(SubSystemID2) ifint $($ShellCode) != $(!SHELL_CODE_OK) set !G:DebugOutputControl = 1 goto ShellCodeError endif set !G:DebugOutputControl = 1 ifstr(i) $($R0) == {} Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "FATAL" "Setup was unable to detect a Compaq controller in your system. Install the adapter and try again." goto setfailed endif set AdapterList = $($R0) Shell "", FindOutdatedRegistryEntries ifint $($R0) == -1 LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\cp100.dll DllLibHandle LibraryProcedure DllExitStr $(DllLibHandle) AddSlots FreeLibrary $(DllLibHandle) endif ForListDo $(AdapterList) Set InstallCard = "YES" ifint $(NTDetected) == $(TRUE) set DetectedBusNum = *($($),1) set DetectedSlotNum = *($($),2) Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), + $(DetectedSlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) == "YES" set InstallCard = "NO" endif endif ifstr(i) $(InstallCard) == "NO" set detmsg = "An "$(ProductHardwareTitle)" at PCI Bus "$(DetectedBusNum)" PCI Slot "$(DetectedSlotNum)" is already installed!" goto det_bypass else Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif Set MyNetCardKey = $($R1) Set MyNetRuleKey = $($R2) Set MyParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(MyNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set BusNumber = $(DetectedBusNum) set SlotNum = $(DetectedSlotNum) OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyWinNT ifstr(i) $(KeyWinNT) != "" GetRegValue $(KeyWinNT) "CurrentVersion" CurrentVersionValue endif CloseRegKey $(KeyWinNT) set m_WinNTVersion = *($(CurrentVersionValue),4) Ifstr(i) $(!STF_PROCESSOR) == "I586" set myPerfOptimsValue = 2 else set myPerfOptimsValue = 0 endif ifcontains(i) $(m_WinNTVersion) not-in {"3.50", "3.51"} Ifstr(i) $(!STF_PROCESSOR) == "I586" set myPerfOptimsValue = 2 else set myPerfOptimsValue = 0 endif endif Set NewValueList = {+ {Adaptive_IFS, $(NoTitle), $(!REG_VT_DWORD), 1}, + {BusNumber, $(NoTitle), $(!REG_VT_DWORD), $(BusNumber)},+ {BusType, $(NoTitle), $(!REG_VT_DWORD), 5)},+ {BusTypeLocal, $(NoTitle), $(!REG_VT_DWORD), 5}, + {ForceDpx, $(NoTitle), $(!REG_VT_DWORD), 0}, + {MapRegisters, $(NoTitle), $(!REG_VT_DWORD), 64}, + {MediaType, $(NoTitle), $(!REG_VT_DWORD), 1 },+ {MsPciScan, $(NoTitle), $(!REG_VT_DWORD), 1 },+ {NumCoalesce, $(NoTitle), $(!REG_VT_DWORD), 8}, + {NumRfd, $(NoTitle), $(!REG_VT_DWORD), 16}, + {NumTbdPerTcb, $(NoTitle), $(!REG_VT_DWORD), 12}, + {NumTcb, $(NoTitle), $(!REG_VT_DWORD), 16}, + {PerfOptims, $(NoTitle), $(!REG_VT_DWORD), $(myPerfOptimsValue)},+ {RxDmaCount, $(NoTitle), $(!REG_VT_DWORD), 0}, + {RxFifo, $(NoTitle), $(!REG_VT_DWORD), 8}, + {SlotNumber, $(NoTitle), $(!REG_VT_DWORD), $(SlotNum)},+ {Speed, $(NoTitle), $(!REG_VT_DWORD), 0}, + {Threshold, $(NoTitle), $(!REG_VT_DWORD), 16}, + {TxDmaCount, $(NoTitle), $(!REG_VT_DWORD), 0}, + {TxFifo, $(NoTitle), $(!REG_VT_DWORD), 8}, + {Txmitwait, $(NoTitle), $(!REG_VT_DWORD), 1}, + {UcodeSW, $(NoTitle), $(!REG_VT_DWORD), 1}, + {UnderrunRetry, $(NoTitle), $(!REG_VT_DWORD), 1}, + } Shell $(UtilityInf), AddValueList, $(MyParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(MyNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(MyNetCardKey) CloseRegKey $(MyNetRuleKey) endif det_bypass = + EndForListDo goto writeparameters writeparameters = + ifstr(i) $(Option) == "ATEAMADAPTER" Set NewValueList = {+ {CheckTime, $(NoTitle), $(!REG_VT_DWORD), $(CheckTimeValue)},+ {DisableTime, $(NoTitle), $(!REG_VT_DWORD), $(DisableTimeValue)},+ {IdleTime, $(NoTitle), $(!REG_VT_DWORD), $(IdleTimeValue)},+ {ProbeTime, $(NoTitle), $(!REG_VT_DWORD), $(ProbeTimeValue)},+ } Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif goto successful endif Shell $(UtilityInf), GetBusTypeNum set BusTypeNum = $($R1) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif Set IOAddrValue = *($(IOAddrValues), ~($(IOAddrList),$(IOAddrValue))) Shell "" DebugConfiguration "Before Writing Parameters" set NewValueList = {{Eid,$(NoTitle),$(!REG_VT_DWORD),0)}} OpenRegKey $(!REG_H_LOCAL) "" $(ExeKeyName)"\"Adapters $(MAXIMUM_ALLOWED) Exe1SetAdapterKey ifstr $(Exe1SetAdapterKey) == $(KeyNull) CreateRegKey $(!REG_H_LOCAL) {$(ExeKeyName)"\"Adapters,0,GenericClass} "" + $(MAXIMUM_ALLOWED) "" Exe1SetAdapterKey ifstr $(Exe1SetAdapterKey) == $(KeyNull) Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegAdapterFailed goto fatalregistry endif endif set NewValueList = {{$(ExeAdapterName),$(NoTitle), $(!REG_VT_SZ), $(Adapter)}} Shell $(UtilityInf), AddValueList, $(Exe1SetAdapterKey), $(NewValueList) CloseRegKey $(Exe1SetAdapterKey) OpenRegKey $(!REG_H_LOCAL) "" $(ExeKeyName)"\"$(ExeAdapterName) $(MAXIMUM_ALLOWED) Exe1SetAdapterKey ifstr $(Exe1SetAdapterKey) == $(KeyNull) CreateRegKey $(!REG_H_LOCAL) {$(ExeKeyName)"\"$(ExeAdapterName),0,GenericClass} "" + $(MAXIMUM_ALLOWED) "" Exe1SetAdapterKey ifstr $(Exe1SetAdapterKey) == $(KeyNull) Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegEPRO10Failed goto fatalregistry endif endif set NewValueList = {{Configure,$(NoTitle),$(!REG_VT_SZ),$(Configure)},+ {Detect,$(NoTitle),$(!REG_VT_SZ),$(Detect)},+ {Diagnose,$(NoTitle),$(!REG_VT_SZ),$(Diagnose)},+ {DLL,$(NoTitle),$(!REG_VT_SZ),$(DLL)},+ {Help,$(NoTitle),$(!REG_VT_SZ),$(Help)},+ {RegistryKey,$(NoTitle),$(!REG_VT_SZ),$(RegistryKey)},+ {AdapterDescription,$(NoTitle),$(!REG_VT_SZ),$(AdapterDescription)},+ {InstallAnyway,$(NoTitle),$(!REG_VT_SZ),$(InstallAnyway)},+ {DeviceExist,$(NoTitle),$(!REG_VT_SZ),$(DeviceExist)},+ {GetExtendedFeatures,$(NoTitle),$(!REG_VT_SZ),$(GetExtendedFeatures)},+ {Summary,$(NoTitle),$(!REG_VT_SZ),$(Summary)}} Shell $(UtilityInf), AddValueList, $(Exe1SetAdapterKey), $(NewValueList) CloseRegKey $(Exe1SetAdapterKey) OpenRegKey $(!REG_H_LOCAL) "" $(ExeKeyName)"\"$(ExeAdapterName)"\"$(ExeParameters) $(MAXIMUM_ALLOWED) Exe1SetAdapterKey ifstr $(Exe1SetAdapterKey) == $(KeyNull) CreateRegKey $(!REG_H_LOCAL) {$(ExeKeyName)"\"$(ExeAdapterName)"\"$(ExeParameters),0,GenericClass} "" + $(MAXIMUM_ALLOWED) "" Exe1SetAdapterKey ifstr $(Exe1SetAdapterKey) == $(KeyNull) Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegEPRO10Failed goto fatalregistry endif endif set NewValueList = { + {BusNumber,$(NoTitle),$(!REG_VT_SZ),$(BusNumber)}, + {BusType,$(NoTitle),$(!REG_VT_SZ),$(BusType)}, + {BusTypeLocal,$(NoTitle),$(!REG_VT_SZ),$(BusTypeLocal)}, + {Eid,$(NoTitle),$(!REG_VT_SZ),$(Eid)}, + {Fifo,$(NoTitle),$(!REG_VT_SZ),$(Fifo)}, + {ForceDpx,$(NoTitle),$(!REG_VT_SZ),$(ForceDpx)}, + {MapRegisters,$(NoTitle),$(!REG_VT_SZ),$(MapRegisters)}, + {MediaType,$(NoTitle),$(!REG_VT_SZ),$(MediaType)}, + {MsPciScan,$(NoTitle),$(!REG_VT_SZ),$(MsPciScan)}, + {NumCoalesce,$(NoTitle),$(!REG_VT_SZ),$(NumCoalesce)}, + {NumRfd,$(NoTitle),$(!REG_VT_SZ),$(NumRfd)}, + {NumTbd,$(NoTitle),$(!REG_VT_SZ),$(NumTbd)}, + {NumTbdPerTcb,$(NoTitle),$(!REG_VT_SZ),$(NumTbdPerTcb)}, + {NumTcb,$(NoTitle),$(!REG_VT_SZ),$(NumTcb)}, + {Off,$(NoTitle),$(!REG_VT_SZ),$(Off)}, + {On,$(NoTitle),$(!REG_VT_SZ),$(On)}, + {RxDmaCount,$(NoTitle),$(!REG_VT_SZ),$(RxDmaCount)}, + {RxFifo,$(NoTitle),$(!REG_VT_SZ),$(RxFifo)}, + {Slot,$(NoTitle),$(!REG_VT_SZ),$(Slot)}, + {Speed,$(NoTitle),$(!REG_VT_SZ),$(Speed)}, + {Threshold,$(NoTitle),$(!REG_VT_SZ),$(Threshold)}, + {TxDmaCount,$(NoTitle),$(!REG_VT_SZ),$(TxDmaCount)}, + {TxFifo,$(NoTitle),$(!REG_VT_SZ),$(TxFifo)}, + {UnderrunRetry,$(NoTitle),$(!REG_VT_SZ),$(UnderrunRetry)}, + {PerfOptims,$(NoTitle),$(!REG_VT_SZ),$(PerfOptims)}, + {UcodeSW,$(NoTitle),$(!REG_VT_SZ),$(UcodeSW)}, + {Adaptive_IFS,$(NoTitle),$(!REG_VT_SZ),$(Adaptive_IFS)}, + {Txmitwait,$(NoTitle),$(!REG_VT_SZ),$(Txmitwait)}, + } Shell $(UtilityInf), AddValueList, $(Exe1SetAdapterKey), $(NewValueList) CloseRegKey $(Exe1SetAdapterKey) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndWait ifstr(i) $(!NTN_Origination) == "INSTALL" ifstr(i) $(!STF_GUI_UNATTENDED) == YES RunProgram DummyExitCode "" "" $(!STF_WINDOWSSYSPATH)\$(ExeName).EXE /BATCH $(AdapterServiceKey) else RunProgram DummyExitCode "" "" $(!STF_WINDOWSSYSPATH)\$(ExeName).EXE $(AdapterServiceKey) endif endif Ifstr(i) $(!NTN_InstallMode) != configure ifint $(ExitCode) >= 2 set CommonStatus = STATUS_USERCANCEL goto abandon endif else ifint $(ExitCode) == 0 set CommonStatus = STATUS_NO_EFFECT endif ifint $(ExitCode) == 2 set CommonStatus = STATUS_NO_EFFECT endif endif goto successful bindingadapter = + ifstr(i) $(Option) == "ATEAMADAPTER" OpenRegKey $(!REG_H_LOCAL) "" $(ServicesBaseName)"\"$(ProductATeamTransportName) $(MAXIMUM_ALLOWED) TransportKey Ifstr $(TransportKey) == $(KeyNull) else Set NewValueList = {Type, $(NoTitle), $(!REG_VT_DWORD), 4 } SetRegValue $(TransportKey) $(NewValueList) CloseRegKey $(TransportKey) endif OpenRegKey $(!REG_H_LOCAL) "" $(ServicesBaseName)"\"$(ProductATeamSoftwareName)"\Linkage" $(MAXIMUM_ALLOWED) LinkageKey Ifstr $(LinkageKey) == $(KeyNull) else GetRegValue $(LinkageKey) "Bind" BindList set AdapterList = *($(BindList),4) CloseRegKey $(LinkageKey) ForListDo $(AdapterList) Split-String $($), "\", Adapter QueryListSize ListSize $(Adapter) set mspaName = *($(Adapter),$(ListSize)) EndForListDo OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(FTTransportName)"\Linkage" $(MAXIMUM_ALLOWED) LinkageKey ifstr $(LinkageKey) != $(KeyNull) GetRegValue $(LinkageKey) "Bind" BindList set AdapterList = *($(BindList),4) set CardNumber = 0 set NewBindList = {} set NewBindDisableList = {} ForListDo $(AdapterList) Split-String $($), "\", Adapter QueryListSize ListSize $(Adapter) set CardName = *($(Adapter),$(ListSize)) ifstr(i) $(CardName) == $(FTTransportName) set NewBindDisableList = >($(NewBindDisableList), $($)) else set NewBindList = >($(NewBindList), $($)) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(CardName)"\Parameters" $(MAXIMUM_ALLOWED) ParamKey Ifstr $(ParamKey) == $(KeyNull) else OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(CardName)"\Parameters\"$(FTTransportName) $(MAXIMUM_ALLOWED) KeyFTProtocol Ifstr $(KeyFTProtocol) == $(KeyNull) CreateRegKey $(ParamKey) { $(FTTransportName), 0, GenericClass } "" + $(!REG_KEY_SET_VALUE) "" KeyFTProtocol Ifstr $(KeyFTProtocol) == $(KeyNull) Endif else endif SetRegValue $(KeyFTProtocol) {"Connect",$(NoTitle),$(!REG_VT_SZ), $(mspaName)} SetRegValue $(KeyFTProtocol) {"Number", $(NoTitle),$(!REG_VT_DWORD),$(CardNumber)} set-add CardNumber = $(CardNumber) , 1 CloseRegKey $(KeyFTProtocol) CloseRegKey $(ParamKey) endif endif EndForListDo CloseRegKey $(LinkageKey) endif endif Shell "", PruneLoopbackBinding, $(FTTransportName), $(FTSoftwareName) set FTStartNum = 1 FT_jmp = + Shell $(UtilityInf), FindNextNetworkCard, $(FTSoftwareName), $(FTStartNum) ifstr $($R0) != $(KeyNull) GetRegValue $($R0) "ServiceName" ValueList set FTTargetService = *($(ValueList),4) CloseRegKey $($R0) set FTStartNum = $($R1) Shell "", EnableDisableBindings, "iVLANProtocol", "\Device\"$(FTTargetService), "disable" Shell "", EnableDisableBindings, $(FTTransportName), "\Device\"$(FTTargetService), "disable" goto FT_jmp else ifint $(FTStartNum) != "10" set-add FTStartNum = $(FTStartNum), 1 goto FT_jmp endif endif set FTStartnum = "1" BA_FTjmp2 = + Shell $(UtilityInf), FindNextNetworkCard, $(ProductSoftwareName), $(FTStartnum) ifstr $($R0) != $(KeyNull) GetRegValue $($R0) "ServiceName" ValueList set BA_FTTargetService = *($(ValueList),4) CloseRegKey $($R0) set FTStartnum = $($R1) Shell $(UtilityInf), FindService, $(BA_FTTargetService), "adapter" ifstr $($R0) != $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(BA_FTTargetService)"\Parameters\"$(FTTransportName) $(MAXIMUM_ALLOWED) BA_FTProtoKeySvc ifstr $(BA_FTProtoKeySvc) != $(KeyNull) Shell "", PruneEverything, $(BA_FTTargetService) Shell "", EnableDisableBindings, $(FTTransportName), "\Device\"$(BA_FTTargetService), "activate" else Shell "", EnableDisableBindings, $(FTTransportName), "\Device\"$(BA_FTTargetService), "disable" endif endif goto BA_FTjmp2 else ifint $(FTStartnum) != "10" set-add FTStartnum = $(FTStartnum), 1 goto BA_FTjmp2 endif endif endif goto successful removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else-ifstr(i) $(Option) == "ATEAMADAPTER" OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) RM_FTVictimFTKey Ifstr $(RM_FTVictimFTKey) == $(KeyNull) goto fatalregistry endif GetRegValue $(RM_FTVictimFTKey), "ServiceName", RM_FTVictimInfo set RM_FTVictim = *($(RM_FTVictimInfo), 4) CloseRegKey $(RM_FTVictimFTKey) set EnableBindings = "TRUE" set rm_FTStartnum = "1" RM_FTjmp2 = + Shell $(UtilityInf), FindNextNetworkCard, $(ProductSoftwareName), $(rm_FTStartnum) ifstr $($R0) != $(KeyNull) GetRegValue $($R0) "ServiceName" ValueList set RM_FTTargetService = *($(ValueList),4) CloseRegKey $($R0) set rm_FTStartnum = $($R1) Shell $(UtilityInf), FindService, $(RM_FTTargetService), "adapter" ifstr $($R0) != $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(RM_FTTargetService)"\Parameters\"$(FTTransportName) $(MAXIMUM_ALLOWED) RM_FTProtoKeySvc ifstr $(RM_FTProtoKeySvc) != $(KeyNull) GetRegValue $(RM_FTProtoKeySvc) "Connect" ValueList set RM_FTcurrent = *($(ValueList),4) ifstr $(RM_FTcurrent) == $(RM_FTVictim) ifstr(i) $(EnableBindings) == "TRUE" set EnableBindings = "FALSE" Shell $(UtilityInf), FindService, "NetBT", "protocol" ifstr $($R0) != $(KeyNull) Shell "", EnableDisableBindings, "LanmanWorkstation", "\Device\NetBT_"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "LanmanServer", "\Device\NetBT_"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "NetBIOS", "\Device\NetBT_"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "RemoteAccess", "\Device\NetBT_"$(RM_FTTargetService), "activate" endif Shell $(UtilityInf), FindService, "Nbf", "protocol" ifstr $($R0) != $(KeyNull) Shell "", EnableDisableBindings, "LanmanWorkstation", "\Device\Nbf_"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "LanmanServer", "\Device\Nbf_"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "NetBIOS", "\Device\Nbf_"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "RemoteAccess", "\Device\Nbf_"$(RM_FTTargetService), "activate" endif Shell "", EnableDisableBindings, "Nbf", "\Device\"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "NwlnkIpx", "\Device\"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "Tcpip", "\Device\"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "AppleTalk", "\Device\"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "NetBT", "\Device\"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "bh", "\Device\"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "DLC", "\Device\"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, "Streams", "\Device\"$(RM_FTTargetService), "activate" Shell "", EnableDisableBindings, $(FTTransportName), "\Device\"$(RM_FTTargetService), "disable" CloseRegKey $(RM_FTProtoKeySvc) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(RM_FTTargetService)"\Parameters\" $(MAXIMUM_ALLOWED) RM_FTProtoKeySvc2 DeleteRegKey $(RM_FTProtoKeySvc2) $(FTTransportName) CloseRegKey $(RM_FTProtoKeySvc2) endif endif endif endif goto RM_FTjmp2 else ifint $(rm_FTStartnum) != "10" set-add rm_FTStartnum = $(rm_FTStartnum), 1 goto RM_FTjmp2 endif endif Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductATeamHardwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\"$(ProductATeamSoftwareName) $(MAXIMUM_ALLOWED) Rm_FTServiceKey Ifstr $(Rm_FTServiceKey) == $(KeyNull) Shell $(UtilityInf), RemoveService,$(ProductATeamTransportName), "NO" Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductATeamTransportName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else GetRegValue $(Rm_FTServiceKey) "DeleteFlag" ValueList ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) set RM_FTFlagPresent = *($(ValueList),4) ifstr $(RM_FTFlagPresent) == "1" Shell $(UtilityInf), RemoveService,$(ProductATeamTransportName), "NO" Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductATeamTransportName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif endif endif CloseRegKey $(Rm_FTServiceKey) goto end else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif endif endif goto end UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set !UG_Filename = $($R0) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif OpenRegKey $(!REG_H_LOCAL) "" $(ExeKeyName)"\"Adapters $(MAXIMUM_ALLOWED) Exe1SetAdapterKey ifstr $(Exe1SetAdapterKey) == $(KeyNull) CreateRegKey $(!REG_H_LOCAL) {$(ExeKeyName)"\"Adapters,0,GenericClass} "" + $(MAXIMUM_ALLOWED) "" Exe1SetAdapterKey ifstr $(Exe1SetAdapterKey) == $(KeyNull) Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegAdapterFailed goto fatalregistry endif endif set NewValueList = {{$(ExeAdapterName),$(NoTitle), $(!REG_VT_SZ), $(Adapter)}} Shell $(UtilityInf), AddValueList, $(Exe1SetAdapterKey), $(NewValueList) CloseRegKey $(Exe1SetAdapterKey) OpenRegKey $(!REG_H_LOCAL) "" $(ExeKeyName)"\"$(ExeAdapterName) $(MAXIMUM_ALLOWED) Exe1SetAdapterKey ifstr $(Exe1SetAdapterKey) == $(KeyNull) CreateRegKey $(!REG_H_LOCAL) {$(ExeKeyName)"\"$(ExeAdapterName),0,GenericClass} "" + $(MAXIMUM_ALLOWED) "" Exe1SetAdapterKey ifstr $(Exe1SetAdapterKey) == $(KeyNull) Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegEPRO10Failed goto fatalregistry endif endif set NewValueList = {{Configure,$(NoTitle),$(!REG_VT_SZ),$(Configure)},+ {Detect,$(NoTitle),$(!REG_VT_SZ),$(Detect)},+ {Diagnose,$(NoTitle),$(!REG_VT_SZ),$(Diagnose)},+ {DLL,$(NoTitle),$(!REG_VT_SZ),$(DLL)},+ {Help,$(NoTitle),$(!REG_VT_SZ),$(Help)},+ {RegistryKey,$(NoTitle),$(!REG_VT_SZ),$(RegistryKey)},+ {AdapterDescription,$(NoTitle),$(!REG_VT_SZ),$(AdapterDescription)},+ {InstallAnyway,$(NoTitle),$(!REG_VT_SZ),$(InstallAnyway)},+ {DeviceExist,$(NoTitle),$(!REG_VT_SZ),$(DeviceExist)},+ {GetExtendedFeatures,$(NoTitle),$(!REG_VT_SZ),$(GetExtendedFeatures)},+ {Summary,$(NoTitle),$(!REG_VT_SZ),$(Summary)}} Shell $(UtilityInf), AddValueList, $(Exe1SetAdapterKey), $(NewValueList) CloseRegKey $(Exe1SetAdapterKey) Shell "", FindOutdatedRegistryEntries ifint $($R0) == -1 LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\cp100.dll DllLibHandle LibraryProcedure DllExitStr $(DllLibHandle) AddSlots FreeLibrary $(DllLibHandle) endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set Severity = STATUS Set CommonStatus = STATUS_USERCANCEL goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = "Error: "$(FunctionTitle) set STF_MB_TEXT = "Shell Code Error" set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [BindingsReview] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set Status = $($R0) Return $(Status) [DebugConfiguration] return [Install-Option] set STF_OVERWRITE = VERIFYSOURCEOLDER set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" ifcontains(i) $(m_WinNTVersion) not-in {"3.50", "3.51"} AddSectionFilesToCopyList Files-N3NDIS4 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers else AddSectionFilesToCopyList Files-N3NDIS3 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif AddSectionFilesToCopyList Files-Exe $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Exe-Drivers $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList else ifcontains(i) $(m_WinNTVersion) not-in {"3.50", "3.51"} LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(SrcDir)\$(Path)$(ExeName).EXE $(!STF_WINDOWSSYSPATH)\$(ExeName).EXE LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(SrcDir)\$(Path)$(Sp1Name).DLL $(!STF_WINDOWSSYSPATH)\$(Sp1Name).DLL LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(SrcDir)\$(Path)$(ProdHelp).HLP $(!STF_WINDOWSSYSPATH)\$(ProdHelp).HLP LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(SrcDir)\$(Path)$(DllName).DLL $(!STF_WINDOWSSYSPATH)\$(DllName).DLL LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(SrcDir)\$(Path)$(Sp3Name).SYS $(!STF_WINDOWSSYSPATH)\DRIVERS\$(Sp3Name).SYS LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(SrcDir)\$(Path)$(KddName).SYS $(!STF_WINDOWSSYSPATH)\DRIVERS\$(KddName).SYS endif endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" ifcontains(i) $(m_WinNTVersion) not-in {"3.50", "3.51"} AddSectionFilesToCopyList Files-N3NDIS4 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers else AddSectionFilesToCopyList Files-N3NDIS3 $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Exe $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Exe-Drivers $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [FindPciOEM] read-syms GeneralConstants read-syms FileConstants set VendorID = 32902 set DeviceID = 4649 set MultiAdapter = "HARDWARE\Description\System\MultifunctionAdapter" set InfoList = {} OpenRegKey $(!REG_H_LOCAL) "" $(MultiAdapter) $(MAXIMUM_ALLOWED) KeyMultiAdapter Ifstr $(KeyMultiAdapter) == $(KeyNull) goto FindPciOEM_end endif EnumRegKey $(KeyMultiAdapter) BusList set BusNum = 0 set index = 0 ForListDo $(BusList) OpenRegKey $(!REG_H_LOCAL) "" $(MultiAdapter)"\"$(index) $(MAXIMUM_ALLOWED) KeyMultiAdapterBus GetRegValue $(KeyMultiAdapterBus) "Identifier" IdentifierInfo ifstr(i) *($(IdentifierInfo),4) == "PCI" set function = 0 set device = 0 FindPciOEM_again = + ifint $(device) < 32 LibraryProcedure Result, $(!LIBHANDLE), GetPciInformation, $(BusNum), $(device), $(function) ifint *($(Result),1) == $(VendorID) ifint *($(Result),2) == $(DeviceID) set InfoList = >($(InfoList),{$(BusNum),$(device),0}) endif endif Set-add device = $(device),1 goto FindPciOEM_again endif set-add BusNum = $(BusNum),1 endif set-add index = $(index),1 EndForListDo CloseRegKey $(KeyMultiAdapter) FindPciOEM_end = + return $(InfoList) [CheckPCISubVendorSystemID] read-syms GeneralConstants read-syms FileConstants set VendorID = $($0) set DeviceID = $($1) set SubVendorID1 = $($2) set SubDeviceID1 = $($3) set SubVendorID2 = $($4) set SubDeviceID3 = $($5) set MultiAdapter = "HARDWARE\Description\System\MultifunctionAdapter" set InfoList = {} OpenRegKey $(!REG_H_LOCAL) "" $(MultiAdapter) $(MAXIMUM_ALLOWED) KeyMultiAdapter Ifstr $(KeyMultiAdapter) == $(KeyNull) goto CheckPCISubVendorSystemID_return endif EnumRegKey $(KeyMultiAdapter) BusList set BusNum = 0 set index = 0 LoadLibrary $(Disk1) $(!STF_WINDOWSSYSPATH)\cp100.dll DllLibHandle ForListDo $(BusList) OpenRegKey $(!REG_H_LOCAL) "" $(MultiAdapter)"\"$(index) $(MAXIMUM_ALLOWED) KeyMultiAdapterBus GetRegValue $(KeyMultiAdapterBus) "Identifier" IdentifierInfo ifstr(i) *($(IdentifierInfo),4) == "PCI" set device = 0 next_device = + ifint $(device) < 32 set function = 0 LibraryProcedure Result, $(!LIBHANDLE), GetPciInformation, $(BusNum), $(device), $(function) ifint *($(Result),1) == 65535 Set-add device = $(device),1 goto next_device endif ifint *($(Result),1) == $(VendorID) ifint *($(Result),2) == $(DeviceID) LibraryProcedure DllExitStr $(DllLibHandle) GetSubVendorSystemID $(device) set !G:DebugOutputControl = 1 set !G:DebugOutputControl = 0 ifint *($(DllExitStr),1) == $(SubVendorID1) set InfoList = >($(InfoList),{$(BusNum),$(device),$(function)}) else ifint *($(DllExitStr),1) == $(SubVendorID2) set InfoList = >($(InfoList),{$(BusNum),$(device),$(function)}) else ifint *($(DllExitStr),1) == "0" set InfoList = >($(InfoList),{$(BusNum),$(device),$(function)}) else Set-add device = $(device),1 goto next_device endif endif endif endif endif Set-add device = $(device),1 goto next_device endif finish_bus = + set-add BusNum = $(BusNum),1 endif set-add index = $(index),1 EndForListDo FreeLibrary $(DllLibHandle) CloseRegKey $(KeyMultiAdapter) CheckPCISubVendorSystemID_return = + return $(InfoList) [EnableDisableBindings] read-syms GeneralConstants read-syms FileConstants set m_ServiceName = $($0) set m_BindingString = $($1) set m_Action = $($2) ifstr(i) $(m_Action) == "disable" set m_Linkage = "\Linkage" else set m_Linkage = "\Linkage\Disabled" endif Shell $(UtilityInf), FindService, $(m_ServiceName), "protocol" ifstr $($R0) != $(KeyNull) Set m_BindList = {} OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(m_ServiceName)$(m_Linkage) $(MAXIMUM_ALLOWED) m_KeySvc GetRegValue $(m_KeySvc), "Bind", m_TempList Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set m_BindList = *($(m_TempList),4) set m_found = "FALSE" ForListDo $(m_BindList) ifstr(i) $(m_found) == "FALSE" ifstr(i) $($) == $(m_BindingString) Shell $(UtilityInf), ToggleBinding, $(m_ServiceName), $(#), $(m_Action) set m_found = "TRUE" endif endif EndForListDo Endif CloseRegKey $(m_KeySvc) endif return [FindOutdatedRegistryEntries] read-syms GeneralConstants read-syms FileConstants set ReturnValue = 0 set scanstartnum = "1" RegCheckjmp = + Shell $(UtilityInf), FindNextNetworkCard, $(ProductSoftwareName), $(scanstartnum) ifstr $($R0) != $(KeyNull) GetRegValue $($R0) "ServiceName" ValueList set scanTargetService = *($(ValueList),4) CloseRegKey $($R0) set scanstartnum = $($R1) Shell $(UtilityInf), FindService, $(scanTargetService), "adapter" ifstr $($R0) != $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(scanTargetService)"\Parameters" $(MAXIMUM_ALLOWED) scanProtoKeySvc Ifstr $(scanProtoKeySvc) != $(KeyNull) GetRegValue $(scanProtoKeySvc) "Eid" EidValue Ifstr $(EidValue) != $(KeyNull) GetRegValue $(scanProtoKeySvc) "SlotNumber" SlotValue Ifstr $(SlotValue) == $(KeyNull) set ReturnValue = -1 endif endif endif endif goto RegCheckjmp else ifint $(scanstartnum) != "10" set-add scanstartnum = $(scanstartnum), 1 goto RegCheckjmp endif endif return $(ReturnValue) [PruneLoopbackBinding] read-syms GeneralConstants read-syms FileConstants set ProtocolEdgeName = $($0) set MiniportEdgeName = $($1) startpruningloopback = + Set BA_BindList = {} OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProtocolEdgeName)"\Linkage" $(MAXIMUM_ALLOWED) BA_KeySvc GetRegValue $(BA_KeySvc), "Bind", TempValue Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set BA_BindList = *($(TempValue),4) Endif set BA_found = "FALSE" ForListDo $(BA_BindList) ifstr(i) $(BA_found) == "FALSE" Split-String $($) "0123456789\" BA_TestItem ifcontains(i) $(MiniportEdgeName) in $(BA_TestItem) Shell $(UtilityInf), ToggleBinding, $(ProtocolEdgeName), $(#), "disable" set BA_FTFound = "TRUE" endIf endif EndForListDo CloseRegKey $(BA_KeySvc) ifstr(i) $(BA_found) == "TRUE" goto startpruningloopback endif return [PruneEverything] read-syms GeneralConstants read-syms FileConstants set ServiceToBePruned = $($0) Shell $(UtilityInf), FindService, "NetBT", "protocol" ifstr $($R0) != $(KeyNull) Shell "", EnableDisableBindings, "LanmanWorkstation", "\Device\NetBT_"$(ServiceToBePruned), "disable" Shell "", EnableDisableBindings, "LanmanServer", "\Device\NetBT_"$(ServiceToBePruned), "disable" Shell "", EnableDisableBindings, "NetBIOS", "\Device\NetBT_"$(ServiceToBePruned), "disable" Shell "", EnableDisableBindings, "RemoteAccess", "\Device\NetBT_"$(ServiceToBePruned), "disable" endif Shell $(UtilityInf), FindService, "Nbf", "protocol" ifstr $($R0) != $(KeyNull) Shell "", EnableDisableBindings, "LanmanWorkstation", "\Device\Nbf_"$(ServiceToBePruned), "disable" Shell "", EnableDisableBindings, "LanmanServer", "\Device\Nbf_"$(ServiceToBePruned), "disable" Shell "", EnableDisableBindings, "NetBIOS", "\Device\Nbf_"$(ServiceToBePruned), "disable" Shell "", EnableDisableBindings, "RemoteAccess", "\Device\Nbf_"$(ServiceToBePruned), "disable" endif set ServicesStr = "SYSTEM\CurrentControlSet\Services" OpenRegKey $(!REG_H_LOCAL) "" $(ServicesStr) $(MAXIMUM_ALLOWED) ServicesKey Ifstr $(ServicesKey) == $(KeyNull) goto FindPciSERVER_end endif EnumRegKey $(ServicesKey) ServicesList ForListDo $(ServicesList) set TempTargetService = *($($),1) ifstr(i) $(TempTargetService) != $(ProductSoftwareName) set TargetServiceString = "SYSTEM\CurrentControlSet\Services\"$(TempTargetService)"\Linkage" OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(TempTargetService)"\Linkage" $(MAXIMUM_ALLOWED) ServiceLinkageKey GetRegValue $(ServiceLinkageKey), "Bind", TempValue Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS) Set ServiceBindList = *($(TempValue),4) ForListDo $(ServiceBindList) Split-String $($) "\" TestItem ifcontains(i) $(ServiceToBePruned) in $(TestItem) Shell "", EnableDisableBindings, $(TempTargetService), "\Device\"$(ServiceToBePruned), "disable" endIf EndForListDo Endif CloseRegKey $(ServiceLinkageKey) endif EndForListDo returnDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.