; ; Used by Standard TCP/IP Port Monitor to determine the type of port ; ; ; Section names should be less than 60 characters ; [Ports] "HP *B.*JETDIRECT EX*" = HP_JD_EX_1 "HP *JETDIRECT EX*B.*" = HP_JD_EX_1 "HP *JETDIRECT EX*E.*" = HP_JD_EX_1 "HP *JETDIRECT EX*F.*" = HP_JD_EX_1 "HP *JETDIRECT EX*H.*" = HP_JD_EX_1 "HP *JETDIRECT EX*" = HP_JD_EX "HP *" = HP_Jetdirect "IBM Network*" = IBM_NP "NetportExpress*PRO* 3-port*" = Intel_PRO_3 "NetportExpress*PRO* single*" = Intel_PRO_1 "NB*" = Canon "NetQue*" = Emulex_ex "NETJet*" = Emulex_MIO "Xerox SESS SNMP Agent*" = Xerox_dcs [HP_Jetdirect] PORTS = 1 NAME = "Hewlett Packard Jet Direct" PROTOCOL1 = "RAW" PORTNUMBER1 = 9100 SNMP1 = "?" [HP_JD_EX_1] NAME = "Hewlett Packard JetDirect Ex (ãäÝÐ ÝÑÏí)" PORTS = 1 NAME1 = "Parallel" PROTOCOL1 = "RAW" PORTNUMBER1 = 9100 SNMP1 = "?" [HP_JD_EX] NAME = "Hewlett Packard JetDirect Ex (ãäÝÐ ãÊÚÏÏ)" PORTS = 3 PROTOCOL1 = "RAW" PORTNUMBER1 = 9100 SNMP1 = "?" NAME1 = "Parallel 1" COMMUNITYNAME1 = "public" protocol2 = "RAW" portnumber2 = 9101 snmp2 = "?" name2 = "Parallel 2" COMMUNITYNAME2 = "public2" protocol3 = "RAW" portnumber3 = 9102 name3 = "Parallel 3" snmp3 = "?" COMMUNITYNAME3 = "public3" [IBM_NP] PORTS = 1 NAME = "ØÇÈÚÉ IBM ááÔÈßÇÊ" PROTOCOL1 = "LPR" QUEUE1 = "PASS" SNMP1 = "Yes" [Intel_PRO_3] name = "Intel Netport Pro (ËáÇËÉ ãäÇÝÐ)" PORTS = 3 NAME1 = "Parallel1" QUEUE1 = "PASS_LPT1" NAME2 = "Parallel2" QUEUE2 = "PASS_LPT2" NAME3 = "Serial" QUEUE3 = "PASS_COM" PROTOCOL1 = "LPR" protocol2 = "LPR" protocol3 = "LPR" SNMP1 = "NO" snmp2 = "NO" snmp3 = "NO" [Intel_PRO_1] name = "Intel Netport Pro (ãäÝÐ ÝÑÏí)" PORTS = 1 NAME1 = "Parallel1" QUEUE1 = "PASS_LPT1" PROTOCOL1 = "LPR" SNMP1 = "NO" [Canon] Name = "ØÇÈÚÉ Canon ááÔÈßÇÊ" ports = 1 protocol1 = "LPR" queue1 = "x" snmp1 = "yes" [Xerox_dcs] name = "Xerox DCS" ports = 1 protocol1 = "LPR" queue1 = "lp" snmp1 = "no" [Emulex_MIO] name = "ÈØÇÞÉ Emulex MIO ÇáÏÇÎáíÉ" ports = 1 protocol1 = "LPR" queue1 = "PASSTHRU" snmp1 = "NO" [Emulex_ex] name = "Emulex NetQue" ports = 2 name1 = "Parallel" protocol1 = "RAW" portnumber1 = 2501 snmp1 = "no" name2 = "Serial" protocol2 = "RAW" portnumber2 = 2502 snmp2 = "no"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.