To set up networking using NOVELL on a Touch 1:
1. Install the network card.
If you are using a NE2000 ethernet card. It should already be set to:
address = 0x220
interrupt = 5
If it isn't, you can use the "setup.exe" program in c:\network\mfg_disk.
If you are using a 3Com PCI network card, you don't have to worry about
these settings.
2. Turn on the Touch 1, use <ctrl-break> to break out of the Touch 1 program.
3. Run "install.bat" on the floppy disk. This copies the necessary files.
4. Run "netsetup.bat" from the floppy disk or from the c:\network directory.
It will ask you your username for this Touch 1, and the network server you
should use. For example:
What is your login name? Touch1
What is your preferred server's name? hal
5. "netsetup.bat" will then attempt to connect to the server you specified and
log into it using your supplied login name. It will then display the
"whoami" information from NOVELL, if available. As it does this, it updates
the setup information on your Touch 1's hard disk.
You can run "netsetup.bat" as many times as you need to to establish a
connection to your server.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.