README Driver File Contents (Repotec.LAN.zip)

****************************************************************************
*                                                                          *
*                         PCMCIA Ethernet Adapter                          *
*                                                                          *
*                     NDIS Driver for Windows NT v4.0                      *
*                                                                          *
*                                Ver. 3.00                                 *
*                                                                          *
*                               README file                                *
*                                                                          *
****************************************************************************

1. Introduction:

   This Ethernet NDIS driver conforms to Microsoft LAN Manager Network
   Driver Interface Specification (NDIS) Version 3.0, supporting Microsoft
   Windows NT v4.0 environment.


2. Contents of the Subdirectory:

      RETH.SYS        The NDIS3 driver for Windows NT.

      OEMSETUP.INF    A setup-information file for installing the Ethernet
                      NDIS driver under Windows NT.


3. Installation

   First, install your PCMCIA Ethernet Adapter on your system following
   the procedure described in your installation manual.  Then follow the
   instructions listed below to load this driver on a Windows NT system.

   1) From Control Panel in My Computer, double-click the "Network" symbol.

   2) In the "Network" panel, select "Adapters" tab and click the "Add"
      button.

   3) Insert the Ethernet Driver Disk into any floppy on your system.

   4) In the "Select Netwrok Adapter" panel, select the "Have Disk" button.

   5) Specify the driver location, e. g., A:\WINNT\4.0, and then select
      the "OK" button.

      The "PCMCIA Ethernet Adapter" will be displayed in the "Select OEM
      Option" panel.

      Note: If necessary, modify the I/O and IRQ settings in the "PCMCIA
            Ethernet Adapter Setup" panel.

      The system copies the files for you.

   6) When returning to the "Network" panel, select the "Close" button.

   7) Restart Windows NT.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.02