README Driver File Contents (Repotec.LAN.zip)

****************************************************************************
*									   *
*			 PCMCIA Ethernet Adapter			   *
*									   *
*			      Packet Driver				   *
*									   *
*				Ver. 1.09				   *
*									   *
*			       README file				   *
*									   *
****************************************************************************

1. Introduction

   This Ethernet Packet driver conforms to FTP Software Public Domain Packet
   Driver Specification Revision 1.09 (Sep. 15, 1989).	It supports many
   network applications, such as FTP Software PC/TCP, NCSA TCP/IP, Wollongong
   Pathway Access and NetWare for DOS workstations.


2. Contents of the Subdirectory

      ETHPK.COM       The Packet driver for the PCMCIA Ethernet Adapter.


3. Installation

   1) Install the PCMCIA Ethernet Adapter on your PC system, following
      the procedure in your PCMCIA Ethernet adapter user's manual.

   2) Install the network operating system you are going to use.

   3) Copy ETHPK.COM to the directory that is created while you are
      installing your network system.

   4) Follow the instructions given in your network application menu to
      alter your system configuration file, then reboot the PC.

   5) At the DOS prompt, type as follows to load ETHPK:

	  ETHPK  Packet_Int [IRQ_NO] [IO_BASE]

      where:

	  Packet_Int	The software interrupt number.	The range is from
			0X60 to 0X80 (Hex).  This is a compulsory parameter.

	  IRQ_NO	The network adapter interrupt request line. The
			range is from 2 to 15 and the default is 5. This
			is an optional parameter.

	  IO_BASE	The network adapter I/O port address. The possible
			settings are : 0x240, 0x280, 0x2C0, 0x300, 0x320,
			0X340, and 0X360. The default is 0x300.  This is an
			optional parameter.


4. Unload

   To remove the packet driver from the main memory, run ETHPK with '-u' at
   the DOS prompt, as shown below:

	    ETHPK -u <Packet_Int>

   where:

	  Packet_Int	 The software interrupt number specified during in-
			 stallation.  This is a compulsory parameter.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.41