;=============================================================================
; 3Com 3c359 TokenLink Velocity XL PCI Adapter
; ISA OEM Network Setup Information file for Microsoft Windows NT Version
; 3.51 & 4.0
; (C) Copyright 1995 3Com Corporation
; %VER 3Com TokenLink PCI Adapter Windows NT 3.51/4.0 PCI OEMSETUP.INF v1.0
;=============================================================================
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
[Options]
TlnkpPCI
[FileConstants]
GenericSysName = "tlnkp.sys"
GenericName = "TLNKP"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
DialogDLL = "tlnkpdlg.dll"
DialogNT351DLL = "tlnkp351.dll"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Microsoft"
ProductMajorVersion = "3"
ProductMinorVersion = "1"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "TLNKP"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "tlnkpSys ndisDriver tlnkpDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """tlnkpSys"" yes no container"
NetRuleSoftwareClass = {"tlnkpDriver basic"}
NetRuleSoftwareBindable = {"tlnkpDriver tlnkpAdapter non exclusive 100"}
ProductHardwareName = "TLNKP"
NetRuleHardwareType = "tlnkp tlnkpAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"tlnkpAdapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
3CNUMBER = "TLNKP"
GROUP_NAME = "3Com TokenLink Velocity XL PCI Adapter"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
Result = ""
TimeOut = 0
PriorityError = "ERROR"
PriorityEvent = "PriorityEvent"
SignalSet = "EventSet"
Null = ""
Exitcode = 0
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
INF_PROCESSOR = "I386"
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
Debug-Output "OEMNAD3T.INF: STF_CWDIR is: "$(!STF_CWDIR)
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
; GET WINDOWS NT VERSION
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyWinNT
ifstr(i) $(KeyWinNT) != ""
GetRegValue $(KeyWinNT) "CurrentVersion" CurrentVersionValue
CloseRegKey $(KeyWinNT)
endif
set m_WinNTVersion = *($(CurrentVersionValue),4)
Debug-Output " m_WinNTVersion = "$(m_WinNTVersion)
ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"}
; WinNT 3.5x
set WINNT351 = 1
else
; WinNT 4.x
set WINNT351 = 0
endif
; END GET WINDOWS NT VERSION
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
set Priority = $(Priority)
endif
Debug-Output "OEMNAD3T.INF: Priority is: "$(Priority)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Debug-Output "OEMNAD3T.INF: Begin - In"
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
Debug-Output "OEMNAD3T.INF: =================================================="
Debug-Output "OEMNAD3T.INF: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "OEMNAD3T.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "OEMNAD3T.INF: Option is: "$(Option)
Debug-Output "OEMNAD3T.INF: !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "OEMNAD3T.INF: !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "OEMNAD3T.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "OEMNAD3T.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "OEMNAD3T.INF: Priority is: "$(Priority)
Debug-Output "OEMNAD3T.INF: =================================================="
Debug-Output "OEMNAD3T.INF: Calling Param_SetDefaults"
Shell $(ParamInf) Param_SetDefaults {}
;;
;; Default settings of the Adapter.
;;
set AutoRingSpeedValue = *($(AutoRingSpeedList), 1)
set PCIVendorIdValue = "Auto"
set MemoryBaseAddrValue = "Auto"
set Priority = $(Priority)
set InterruptValue = "Auto"
set NodeAddressValue = "Default"
set CurrentNodeAddressValue = "Default"
set RxFragmentSizeValue = "Auto"
set RxFragmentNumberValue = "Auto"
set TxFragmentSizeValue = "Auto"
set TxFragmentNumberValue = "Auto"
set ChipRevisionValue = "Auto"
set DriverStateValue = "Loading"
set ConfiguredRingSpeedValue = ""
set BusTypeValue = 1
set BusNumberValue = 0
set SlotNumberValue = 0
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
installadapter = +
Debug-Output "OEMNAD3T.INF: Entering Installadapter"
set WINNT351 = 0
set Vendor = 4279
set CardID = 13712
Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CardID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set AdapterList = $($R0)
set NewAdapterList = {}
set NumNew = 0
ForListDo $(AdapterList)
set BusNumber = *($($),1)
set SlotNum = *($($),2)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNumber), +
$(SlotNum), $(GenericAdapterName), $(ProductHardwareName)
ifstr(i) $($R1) != "YES"
set-add NumNew = $(NumNew),1
ifstr(i) $(NewAdapterList) == {}
set NewAdapterList = {$($)}
else
set NewAdapterList = >($(NewAdapterList),$($))
endif
endif
EndForListDo
set AdapterList = $(NewAdapterList)
ifint $(NumNew) == 0
set AdapterList = {{0,0,0}}
endif
Debug-Output $(AdapterList)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
endif
; install "Install-Helpfile"
endif
endif
;SetHelpFile "tlnkp.hlp" 1 11
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Debug-Output "OEMNAD3T.INF: SrcDir is:"$($R1)
install "Install-Dll"
; goto adaptersetup
ui pop 1
goto adapterverify
configureadapter = +
Debug-Output "OEMNAD3T.INF: Entering Configureadapter"
;SetHelpFile "tlnkp.hlp" 1 11
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "InterruptNumber"
set InterruptValue = $(ValueData)
else-ifstr(i) $(ValueName) == "AutoRingSpeed"
set AutoRingSpeedValue = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryBaseAddress"
set MemoryBaseAddrValue = $(ValueData)
else-ifstr(i) $(ValueName) == "NETWORKADDRESS"
set NodeAddressValue = $(ValueData)
else-ifstr(i) $(ValueName) == "TlnkpNetworkAddress"
set CurrentNodeAddressValue = $(ValueData)
else-ifstr(i) $(ValueName) == "RxFragmentSize"
set RxFragmentSizeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "RxFragmentNumber"
set RxFragmentNumberValue = $(ValueData)
else-ifstr(i) $(ValueName) == "TxFragmentSize"
set TxFragmentSizeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "TxFragmentNumber"
set TxFragmentNumberValue = $(ValueData)
else-ifstr(i) $(ValueName) == "ChipRevision"
set ChipRevisionValue = $(ValueData)
else-ifstr(i) $(ValueName) == "PCIVendorId"
set PCIVendorIdValue = $(ValueData)
else-ifstr(i) $(ValueName) == "DriverState"
set DriverStateValue = $(ValueData)
else-ifstr(i) $(ValueName) == "RingSpeed"
set ConfiguredRingSpeedValue = $(ValueData)
else-ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNumber = $(ValueData)
else-ifstr(i) $(ValueName) == "SlotNumber"
set SlotNumberValue = $(ValueData)
endif
EndForListDo
Debug-Output "OEMNAD3T.INF: =================================================="
Debug-Output "OEMNAD3T.INF: Interrupt is "$(InterruptValue)
Debug-Output "OEMNAD3T.INF: AutoRingSpeedValue is "$(AutoRingSpeedValue)
Debug-Output "OEMNAD3T.INF: MemoryBaseAddrValue is "$(MemoryBaseAddrValue)
Debug-Output "OEMNAD3T.INF: Node Address is "$(NodeAddressValue)
Debug-Output "OEMNAD3T.INF: Current Node Address is "$(CurrentNodeAddressValue)
Debug-Output "OEMNAD3T.INF: RxFragmentSizeValue is "$(RxFragmentSizeValue)
Debug-Output "OEMNAD3T.INF: RxFragmentNumberValue is "$(RxFragmentNumberValue)
Debug-Output "OEMNAD3T.INF: TxFragmentSizeValue is "$(TxFragmentSizeValue)
Debug-Output "OEMNAD3T.INF: TxFragmentNumberValue is "$(TxFragmentNumberValue)
Debug-Output "OEMNAD3T.INF: ChipRevisionValue is "$(ChipRevisionValue)
Debug-Output "OEMNAD3T.INF: PCIVendorIdValue is "$(PCIVendorIdValue)
Debug-Output "OEMNAD3T.INF: DriverStateValue is "$(DriverStateValue)
Debug-Output "OEMNAD3T.INF: ConfiguredRingSpeedValue is "$(ConfiguredRingSpeedValue)
Debug-Output "OEMNAD3T.INF: BusTypeValue is "$(BusTypeValue)
Debug-Output "OEMNAD3T.INF: BusNumberValue is "$(BusNumber)
Debug-Output "OEMNAD3T.INF: SlotNumberValue is "$(SlotNumberValue)
Debug-Output "OEMNAD3T.INF: =================================================="
set AutoRingSpeedValue = *($(AutoRingSpeedList), ~($(AutoRingSpeedValues),$(AutoRingSpeedValue)))
ifint $(AutoRingSpeedValue) == 1
set AutoRingSpeedValue = *($(AutoRingSpeedList), 1)
endif
ifint $(DriverStateValue) == 1
set DriverStateValue = "Loaded"
else-ifint $(DriverStateValue) == 2
set DriverStateValue = "Unloaded"
endif
Debug-Output "OEMNAD3T.INF: =================================================="
Debug-Output "OEMNAD3T.INF: AutoRingSpeedValue is "$(AutoRingSpeedValue)
Debug-Output "OEMNAD3T.INF: =================================================="
Debug-Output "OEMNAD3T.INF: "
adaptersetup = +
Debug-Output "OEMNAD3T.INF: Entering adaptersetup"
set Result = $(SignalSet)
Set from = adapteroptions
adapteroptions = +
Debug-Output "OEMNAD3T.INF: Entering adapteroptions"
Debug-Output "OEMNAD3T.INF: Loading Dialog dll"
ifint $(WINNT351) == 0
Debug-Output "OEMNAD3T.INF: Loading Dialog NT 4.0 dll"
LoadLibrary $(Media) $(DialogDLL) hLib
Debug-Output "OEMNAD3T.INF: Dialog name:"$(DialogDLL)
else
Debug-Output "OEMNAD3T.INF: Loading Dialog NT 3.51 dll"
LoadLibrary $(Media) $(DialogNT351DLL) hLib
Debug-Output "OEMNAD3T.INF: Dialog name:"$(DialogNT351DLL)
endif
Debug-Output "OEMNAD3T.INF: Load Dialog dll finished"
Debug-Output "OEMNAD3T.INF: =================================================="
Debug-Output "OEMNAD3T.INF: Interrupt is "$(InterruptValue)
Debug-Output "OEMNAD3T.INF: AutoRingSpeedValue is "$(AutoRingSpeedValue)
Debug-Output "OEMNAD3T.INF: MemoryBaseAddrValue is "$(MemoryBaseAddrValue)
Debug-Output "OEMNAD3T.INF: Node Address is "$(NodeAddressValue)
Debug-Output "OEMNAD3T.INF: Current Node Address is "$(CurrentNodeAddressValue)
Debug-Output "OEMNAD3T.INF: RxFragmentSizeValue is "$(RxFragmentSizeValue)
Debug-Output "OEMNAD3T.INF: RxFragmentNumberValue is "$(RxFragmentNumberValue)
Debug-Output "OEMNAD3T.INF: TxFragmentSizeValue is "$(TxFragmentSizeValue)
Debug-Output "OEMNAD3T.INF: TxFragmentNumberValue is "$(TxFragmentNumberValue)
Debug-Output "OEMNAD3T.INF: ChipRevisionValue is "$(ChipRevisionValue)
Debug-Output "OEMNAD3T.INF: PCIVendorIdValue is "$(PCIVendorIdValue)
Debug-Output "OEMNAD3T.INF: DriverStateValue is "$(DriverStateValue)
Debug-Output "OEMNAD3T.INF: ConfiguredRingSpeedValue is "$(ConfiguredRingSpeedValue)
Debug-Output "OEMNAD3T.INF: BusTypeValue is "$(BusTypeValue)
Debug-Output "OEMNAD3T.INF: BusNumberValue is "$(BusNumber)
Debug-Output "OEMNAD3T.INF: SlotNumberValue is "$(SlotNumberValue)
Debug-Output "OEMNAD3T.INF: =================================================="
Debug-Output "OEMNAD3T.INF: "
ifint $(WINNT351) == 0
read-syms FileDependentDlg$(!STF_LANGUAGE)
set Label = $(EditLabel)
set Value = *($(EditTextIn),1)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo2Label)
set Value = *($(EditTextIn),2)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo3Label)
set Value = *($(EditTextIn),3)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo4Label)
set Value = *($(EditTextIn),4)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo7Label)
set Value = *($(EditTextIn),5)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo10Label)
set Value = *($(EditTextIn),6)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo11Label)
set Value = *($(EditTextIn),7)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo12Label)
set Value = *($(EditTextIn),8)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo13Label)
set Value = *($(EditTextIn),9)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo14Label)
set Value = *($(EditTextIn),10)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo5Label)
set Value = *($(EditTextIn),11)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo6Label)
set Value = *($(EditTextIn),12)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo8Label)
set Value = *($(EditTextIn),13)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
set Label = $(Combo9Label)
set Value = *($(EditTextIn),14)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
else
Debug-Output "read the NT 351 dialog"
read-syms FileDependentDlgNTOLD$(!STF_LANGUAGE)
set Label = $(EditLabel)
set Value = *($(EditTextIn),1)
Debug-Output "OEMNAD3T.INF: Pre ui, Value for $(Label) = $(Value)."
endif
Debug-Output "OEMNAD3T.INF: Begin UI"
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
Debug-Output " OEMNAD3T.INF:ButtonPressed "$(ButtonPressed)
Debug-Output $(DLGEVENT)
Debug-Output " Calling WaitOnEvent"
WaitOnEvent $(Result) $(PriorityEvent) $(TimeOut)
Debug-Output " Calling FreeLibrary"
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
Debug-Output "OEMNAD3T.INF: CONTINUE"
set ExitButton = $(ButtonPressed)
set Label = $(EditLabel)
set Value = *($(EditTextOut),1)
set NodeAddressValue = $(Value)
Debug-Output "OEMNAD3T.INF: Post ui, Value for .$(Label). = .$(Value)."
set AutoRingSpeedValue = $(Combo1Out)
Debug-Output "OEMNAD3T.INF: AutoRingSpeedValue ="$(AutoRingSpeedValue)
ifint $(WINNT351) == 0
set Label = $(Combo2Label)
set Value = *($(EditTextOut),2)
set PCIVendorIdValue = $(Value)
Debug-Output "OEMNAD3T.INF: PCIVendorIdValue ="$(PCIVendorIdValue)
set Label = $(Combo3Label)
set Value = *($(EditTextOut),3)
set MemoryBaseAddrValue = $(Value)
Debug-Output "OEMNAD3T.INF: MemoryBaseAddrValue ="$(MemoryBaseAddrValue)
set Label = $(Combo4Label)
set Value = *($(EditTextOut),4)
set ConfiguredRingSpeedValue = $(Value)
Debug-Output "OEMNAD3T.INF: ConfiguredRingSpeedValue ="$(ConfiguredRingSpeedValue)
set Label = $(Combo7Label)
set Value = *($(EditTextOut),5)
set DriverStateValue = $(Value)
Debug-Output "OEMNAD3T.INF: DriverStateValue ="$(DriverStateValue)
set Label = $(Combo10Label)
set Value = *($(EditTextOut),6)
set InterruptValue = $(Value)
Debug-Output "OEMNAD3T.INF: InterruptValue ="$(InterruptValue)
set Label = $(Combo11Label)
set Value = *($(EditTextOut),7)
set ChipRevisionValue = $(Value)
Debug-Output "OEMNAD3T.INF: ChipRevisionValue ="$(ChipRevisionValue)
set Label = $(Combo12Label)
set Value = *($(EditTextOut),8)
set CurrentNodeAddressValue = $(Value)
Debug-Output "OEMNAD3T.INF: CurrentNodeAddressValue ="$(CurrentNodeAddressValue)
set Label = $(Combo13Label)
set Value = *($(EditTextOut),9)
set BusNumber = $(Value)
Debug-Output "OEMNAD3T.INF: BusNumber ="$(BusNumber)
set Label = $(Combo14Label)
set Value = *($(EditTextOut),10)
set SlotNumberValue = $(Value)
Debug-Output "OEMNAD3T.INF: Slot Number ="$(SlotNumberValue)
set Label = $(Combo5Label)
set Value = *($(EditTextOut),11)
set TxFragmentSizeValue = $(Value)
Debug-Output "OEMNAD3T.INF: TxFragmentSizeValue ="$(TxFragmentSizeValue)
set Label = $(Combo6Label)
set Value = *($(EditTextOut),12)
set TxFragmentNumberValue = $(Value)
Debug-Output "OEMNAD3T.INF: TxFragmentNumberValue ="$(TxFragmentNumberValue)
set Label = $(Combo8Label)
set Value = *($(EditTextOut),13)
set RxFragmentNumberValue = $(Value)
Debug-Output "OEMNAD3T.INF: RxFragmentNumberValue ="$(RxFragmentNumberValue)
set Label = $(Combo9Label)
set Value = *($(EditTextOut),14)
set RxFragmentSizeValue = $(Value)
Debug-Output "OEMNAD3T.INF: RxFragmentSizeValue ="$(RxFragmentSizeValue)
endif
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
Debug-Output "OEMNAD3T.INF: BACK"
;set CommonStatus = STATUS_USERCANCEL
;Debug-Output "Action: exit. Bye."
;ui pop 1
;goto end
set Result = $(Null)
Debug-Output "OEMNAD3T.INF: Priority Button Pressed!!"
;RunProgram Exitcode "" "" $(!STF_WINDOWSSYSPATH)\control.exe "pacecfg.cpl"
StartDetachedProcess Exitcode "" "" $(!STF_WINDOWSSYSPATH)\control.exe "pacecfg.cpl"
set Result = $(SignalSet)
SignalEvent $(Result) $(PriorityEvent)
ifstr(i) $(Exitcode) == $(PriorityError)
Debug-Output "OEMNAD3T.INF: Exit Code = "$(Exitcode)
Debug-Output " Called SignalEvent"
Debug-Output "Action: Exit. Bye."
ui pop 1
goto end
else
Debug-Output "OEMNAD3T.INF: Exit Code = "$(Exitcode)
Debug-Output " Called SignalEvent"
ui pop 1
Debug-Output "Action: Go Back To Adapter Setup."
goto adaptersetup
;goto end
endif
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. "
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
adapterverify =+
Debug-Output "OEMNAD3T.INF: Entering adapterverify"
skipoptions =+
Debug-Output "OEMNAD3T.INF: Entering skipoptions"
ifint $(OldVersionExisted) == $(TRUE)
Debug-Output "OEMNAD3T: OlderVersionExisted - TRUE"
ifstr(i) $(!NTN_InstallMode) == configure
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
set BusNumberValue = 0
Debug-Output " OEMNAD3T: Bus Type is "$(BusTypeNum)
Debug-Output " OEMNAD3T: Bus Number is "$(BusNumber)
Debug-Output " OEMNAD3T: Before write registry"
set AutoRingSpeedValue = *($(AutoRingSpeedValues), ~($(AutoRingSpeedList),$(AutoRingSpeedValue)))
set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeValue)},+
{NETWORKADDRESS,$(NoTitle),$(!REG_VT_SZ),$(NodeAddressValue)},+
{AutoRingSpeed, $(NoTitle),$(!REG_VT_DWORD),$(AutoRingSpeedValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
endif
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
Debug-Output "OEMNAD3T: OlderVersionExisted - FALSE"
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Debug-Output "OEMNAD3T: ProductSoftwareName: "$(ProductSoftwareName)
Debug-Output "OEMNAD3T: ProductSoftwareTitle: "$(ProductSoftwareTitle)
Debug-Output "OEMNAD3T: !STF_CONTEXTINFNAME is: "$(!STF_CONTEXTINFNAME)
Debug-Output "OEMNAD3T: ProductSoftwareImagePath: "$(ProductSoftwareImagePath)
Debug-Output "OEMNAD3T: NetEventDLL: "$(NetEventDLL)
Debug-Output "OEMNAD3T: Manufacturer: "$(Manufacturer)
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
Debug-Output "AdapterList "$(AdapterList)
set IAutoRingSpeed = $(AutoRingSpeedValue)
ForListDo $(AdapterList)
Debug-Output "For Loop Count"
set BusNumber = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
Debug-Output "OEMNAD3T: For Loop Count"
Debug-Output "ProductHardwareName="$(ProductHardwareName)
Debug-Output "ProductKeyName="$(ProductKeyName)
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
Debug-Output "KeyAdapterRules="$($R2)
Debug-Output "KeyParameters="$($R3)
Debug-Output "Adapter Number="$($R4)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set HardwareDescription = $(GenericAdapterName)
set HardwareTitle = $(GenericAdapterName)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(HardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(HardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
writeparameters = +
Debug-Output "OEMNAD3T: WriteParameters: IN"
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
set BusNumberValue = 0
Debug-Output " OEMNAD3T: Bus Type is "$(BusTypeValue)
Debug-Output " OEMNAD3T: Bus Number Value is "$(BusNumberValue)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
Debug-Output "OEMNAD3T: Before write registry"
set AutoRingSpeedValue = *($(AutoRingSpeedValues), ~($(AutoRingSpeedList),$(IAutoRingSpeed)))
Debug-Output " OEMNAD3T: AutoRingSpeed Value is "$(AutoRingSpeedValue)
Debug-Output " OEMNAD3T: NodeAddress Value is "$(NodeAddressValue)
set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),5},+
{NETWORKADDRESS,$(NoTitle),$(!REG_VT_SZ),$(NodeAddressValue)},+
{AutoRingSpeed, $(NoTitle),$(!REG_VT_DWORD),$(AutoRingSpeedValue)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),2},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),898633911},+
{SlotNumber, $(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),$(BusNumber)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndForListDo
EndWait
Debug-Output "OEMNAD3T: WriteParameters: Out"
goto paceentries
;goto successful
bindingadapter =+
Debug-Output "OEMNAD3T: BindingAdapter: IN"
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Debug-Output "OEMNAD3T.INF: RemoveAdapter: IN"
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
Ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSOR)
RunProgram ExitCode "Windows Directory" "" UNTLNKP.EXE "-inf"
endif
goto end
UpgradeSoftware = +
Debug-Output "OEMNAD3T.INF: UpgradeSoftware: IN"
LoadLibrary "x" $(!STF_CWDDIR)\ncpa.cpl NCPA_HANDLE
OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\TLNKP" $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
DeleteRegTree $(KeyProduct) ""
LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), DELETESVC, "TLNKP"
set NetworkCardKeyName = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards"
OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardKeyName) $(MAXIMUM_ALLOWED) IE_KeyNetcards
ifstr(i) $(IE_KeyNetcards) != ""
EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
ForListDo $(IE_KeyNameList)
OpenRegKey $(IE_KeyNetcards) "" *($($),1) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ProductName", ProductNameInfo
set ProductName = *($(ProductNameInfo), 4)
Debug-Output " ProductName = "$(ProductName)
ifstr(i) $(ProductName) != "TLNKP"
goto nextnetcard
endif
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
Debug-Output " ServiceName = "$(ServiceName)
OpenRegKey $(!REG_H_LOCAL) "" "System\CurrentControlSet\Services\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
DeleteRegTree $(ServiceKey) ""
DeleteRegTree $(NetworkCardKey) ""
endif
nextnetcard = +
EndForListDo
endif
OpenRegKey $(!REG_H_LOCAL) "" "Software\Microsoft\TlnkpPCI" $(MAXIMUM_ALLOWED) KeyProduct2
ifstr $(KeyProduct2) == $(KeyNull)
LibraryProcedure NCPA_RESULT $(NCPA_HANDLE), CPlSetup $(!STF_HWND), STARTSVC, NetDetect
set !NTN_InstallMode = Install
Shell "" InstallOption $(!STF_LANGUAGE) "TlnkpPCI" $(SrcDir) "YES" "YES" "NO"
set !NTN_InstallMode = Update
else
endif
else
endif
FreeLibrary $(NCPA_HANDLE)
goto end
successful = +
Debug-Output "OEMNAD3T.INF: Succesful: IN"
goto end
abandon = +
Debug-Output "OEMNAD3T.INF: Abandon: IN"
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Debug-Output "OEMNAD3T.INF: Warning: IN"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Debug-Output "OEMNAD3T.INF: Nonfatalinfo: IN"
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Debug-Output "OEMNAD3T.INF: Nonfatal: IN"
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
Debug-Output "OEMNAD3T.INF: nonfatalmsg: IN"
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Debug-Output "OEMNAD3T.INF: fataregistry: IN"
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Debug-Output "OEMNAD3T.INF: fataldetect: IN"
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
Debug-Output "OEMNAD3T.INF: fatal: IN"
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
Debug-Output "OEMNAD3T.INF: ShellCodeError - In"
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
Debug-Output "OEMNAD3T.INF: Setfailed - In"
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
Debug-Output "OEMNAD3T.INF: end: IN"
goto term
term = +
Debug-Output "OEMNAD3T.INF: term - In"
Return $(CommonStatus)
;[DebugConfiguration]
; Set InfName = "OEMNAD3T.INF"
; Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
; return
;
paceentries = +
Debug-Output "OEMNAD3T: Paceentries: IN"
;;
;; Pace Stuff included.
; Put PACE information into registry ***START
; This section contains all of the information for the PAce control panel
; The adapter name goes in the registry key: LM\software\3Com\pacecards\TLNKP
; The application specific stuff goes in LM\software\3Com\pacecards\applications
;*** this is the uninstaller part define 3CNUMBER to be the 3C product code for this product
;open software registry key to put uninstall info in registry.
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) KeyNt
set TrayIconList = {3CUNINSTALL,$(NoTitle),$(!REG_VT_SZ),$(3CNUMBER)}
SetRegValue $(KeyNt) $(TrayIconList)
set TrayIconList = {PACENAME,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)}
SetRegValue $(KeyNt) $(TrayIconList)
CloseRegKey $(KeyNt)
;*** end uninstaller part
; open registry key SOFTPACEKEY = LM\Software
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTPACEKEY
; open registry key SOFTPACEKEY = LM\Software\3Com and create it if it is not there
OpenRegKey $(SOFTPACEKEY) "" "3Com" $(!REG_KEY_WRITE) COMPACEKEY
ifstr $(COMPACEKEY) == ""
CreateRegKey $(SOFTPACEKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMPACEKEY
endif
; open registry key SOFTPACEKEY = LM\Software\3Com\PACECards and create it if it is not there
OpenRegKey $(COMPACEKEY) "" "PACECards" $(!REG_KEY_WRITE) CARDPACEKEY
ifstr $(CARDPACEKEY) == ""
CreateRegKey $(COMPACEKEY) {"PACECards", 0, GenericClass} "" $(!REG_KEY_WRITE) "" CARDPACEKEY
endif
; open registry key SOFTPACEKEY = LM\Software\3Com\PACECards\TLNKP and create it if it is not there
OpenRegKey $(CARDPACEKEY) "" $(ProductSoftwareName) $(!REG_KEY_WRITE) TLNKPPACEKEY
ifstr $(TLNKPPACEKEY) == ""
CreateRegKey $(CARDPACEKEY) {$(ProductSoftwareName), 0, GenericClass} "" $(!REG_KEY_WRITE) "" TLNKPPACEKEY
endif
; Set the adapter name in the registry
SetRegValue $(TLNKPPACEKEY) {"Description", 0, $(!REG_VT_SZ), $(GROUP_NAME)}
; open registry key SOFTPACEKEY = LM\Software\3Com\PACECards\applications and create it if it is not there
OpenRegKey $(CARDPACEKEY) "" "Applications" $(!REG_KEY_WRITE) APPPACEKEY
ifstr $(APPPACEKEY) == ""
CreateRegKey $(CARDPACEKEY) {"Applications", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPPACEKEY
endif
; Each one of theses chunks adds an application and its values to the registry.
; This section adds this to the registry under the key:
; HKEY_LOCAL_MACHINE\SOFTWARE\3Com\PACECards\Applications\APPLICATION_NAME
; Protocol=PROTOCOL_NAME
; Enabled=TRUE_OR_FALSE
; RangeStart=4_DIGIT_HEX#1
; RangeEnd=4_DIGIT_HEX#2
;
; OpenRegKey $(APPPACEKEY) "" "APPLICATION_NAME" $(!REG_KEY_WRITE) APPSPECPACEKEY
; ifstr $(APPSPECPACEKEY) == ""
; CreateRegKey $(APPPACEKEY) {"APPLICATION_NAME", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
; endif
; set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"PROTOCOL_NAME"},+
; {Enabled,$(NoTitle),$(!REG_VT_SZ),"TRUE_OR_FALSE"}, +
; {RangeStart,$(NoTitle),$(!REG_VT_SZ),"4_DIGIT_HEX#1"}, +
; {RangeEnd,$(NoTitle),$(!REG_VT_SZ),"4_DIGIT_HEX#2"}}
; Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; goto ShellCodeError
; endif
; CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Emotion CreativePartner (IPX)" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Emotion CreativePartner (IPX)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"IPX"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"87C7"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"87C8"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Emotion CreativePartner (TCP/IP)" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Emotion CreativePartner (TCP/IP)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"0453"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"0455"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "InSoft Communique!" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"InSoft Communique!", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1025, 1500"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1050, 1525"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Picturetel LiveLAN (over IPX)" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Picturetel LiveLAN (over IPX)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"IPX"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"4050"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"4082"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Picturetel LiveLAN (over TCP/IP)" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Picturetel LiveLAN (over TCP/IP)", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"06a4"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"06d6"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Precept FlashWare" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Precept FlashWare", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"8000, C000"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"8000, C000"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Progressive Networks RealAudio" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Progressive Networks RealAudio", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"6970"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"7170"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Starlight Networks StarCast" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Starlight Networks StarCast", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1911"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1911"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "VCON Cruiser 100" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"VCON Cruiser 100", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1500, 1600"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1500, 1600"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "VXtreme Web Theater" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"VXtreme Web Theater", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"7000"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"7020"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(APPSPECPACEKEY)
OpenRegKey $(APPPACEKEY) "" "Xing Technology Streamworks" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Xing Technology Streamworks", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"1558"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"1558"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
OpenRegKey $(APPPACEKEY) "" "Vosaic Software Server" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Vosaic Software Server", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"TCP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"04D3"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"04D3"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
OpenRegKey $(APPPACEKEY) "" "Vosaic Software Client" $(!REG_KEY_WRITE) APPSPECPACEKEY
ifstr $(APPSPECPACEKEY) == ""
CreateRegKey $(APPPACEKEY) {"Vosaic Software Client", 0, GenericClass} "" $(!REG_KEY_WRITE) "" APPSPECPACEKEY
endif
set NewValueList = {{Protocol,$(NoTitle),$(!REG_VT_SZ),"UDP"},+
{Enabled,$(NoTitle),$(!REG_VT_SZ),"FALSE"}, +
{RangeStart,$(NoTitle),$(!REG_VT_SZ),"F169"}, +
{RangeEnd,$(NoTitle),$(!REG_VT_SZ),"F17D"}}
Shell $(UtilityInf), AddValueList, $(APPSPECPACEKEY), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; Close all opened registry keys.
CloseRegKey $(APPSPECPACEKEY)
CloseRegKey $(TLNKPPACEKEY)
CloseRegKey $(APPPACEKEY)
CloseRegKey $(CARDPACEKEY)
CloseRegKey $(COMPACEKEY)
CloseRegKey $(SOFTPACEKEY)
Debug-Output "OEMNAD3T: Paceentries: OUT"
;;
;;
Goto successful
[Install-Option]
Debug-Output "OEMNAD3T.INF: Install-Option - In"
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"}
; WinNT 3.5x
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)w95nt351 $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files351-Dll $(SrcDir)w95nt351 $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Bin $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Uninstall $(SrcDir)w98nt40 $(!STF_WINDOWSSYSPATH)
else
; WinNT 4.x
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)\w98nt40 $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir)\w98nt40 $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Cpl $(SrcDir)\w98nt40 $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Bin $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Uninstall $(SrcDir)\w98nt40 $(!STF_WINDOWSSYSPATH)
endif
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
Debug-Output "OEMNAD3T.INF: Install-Update - In"
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
ifcontains(i) $(m_WinNTVersion) in {"3.50", "3.51"}
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)w95nt351 $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files351-Dll $(SrcDir)w95nt351 $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Bin $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Uninstall $(SrcDir)w98nt40 $(!STF_WINDOWSSYSPATH)
else
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)\w98nt40 $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir)\w98nt40 $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Cpl $(SrcDir)\w98nt40 $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Bin $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Uninstall $(SrcDir)\w98nt40 $(!STF_WINDOWSSYSPATH)
endif
exit
[Install-Helpfile]
Debug-Output "OEMNAD3T.INF: Install-Helpfile - In"
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
ifstr(i) $(AddCopy) == "YES"
;AddSectionFilesToCopyList Files-hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
exit
[Install-Dll]
Debug-Output "OEMNAD3T.INF: Install-Dll - In"
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
ifcontains(i) $(m_WinNTVersion) not-in {"3.50", "3.51"}
AddSectionFilesToCopyList Files-Dll $(SrcDir)\w98nt40 $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Cpl $(SrcDir)\w98nt40 $(!STF_WINDOWSSYSPATH)
else ;;NT3.51
AddSectionFilesToCopyList Files351-Dll $(SrcDir)w95nt351 $(!STF_WINDOWSSYSPATH)
endif
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
exit
[Source Media Descriptions]
1 = "3Com TokenLink Velocity XL PCI (3C359) Adapter"
[Signature]
FileType = MICROSOFT_FILE
[GetSignature]
read-syms Signature
return $(FileType)
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-TlnkpPCI]
1,TLNKP.SYS , SIZE=20000
[Files-Dll]
1,Tlnkpdlg.DLL , SIZE=7000
[Files351-Dll]
1,Tlnkp351.DLL , SIZE=7000
[Files-Cpl]
1,Pacecfg.cpl, SIZE=10000
1,Pacecfg.hlp, SIZE=6617
[Files-Uninstall]
1,UNTLNKP.EXE, SIZE=6617
[Files-Bin]
1,tlnkp.mac, SIZE=10000
;[Files-hlp]
; 1,TLNKP.HLP , SIZE=10000
[LanguagesSupported]
ENG
[OptionsTextENG]
Tlnkp = "3Com TokenLink Velocity XL PCI Adapter"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
GenericAdapterName = "3Com TokenLink Velocity XL PCI Adapter"
GenericDriverName = "3Com TokenLink Velocity XL PCI Adapter Driver"
ProductSoftwareDescription = $(GenericDriverName)
ProductHardwareDescription = $(GenericAdapterName)
ProductHardwareTLNKPDescription="3Com TokenLink Velocity XL PCI Adapter Driver"
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTLNKPTitle = $(GenericAdapterName)
DialogDllName = "tlnkpdlg.dll"
AutoRingSpeedList = ^(AutoRingSpeedChoices, 1)
AutoRingSpeedValues = ^(AutoRingSpeedChoices, 2)
[DialogConstantsENG]
Help = "&Help"
Exit = "C&ancel"
OK = "&OK"
HelpContext = ""
Continue = "&Continue"
Cancel = "Ca&ncel"
Priority = "&Priority"
[MemoryMappedChoicesENG]
Map_1 = 1, "ON"
Map_2 = 0, "OFF"
[FileDependentDlgENG]
NodeAddressLabel = "&Network Address"
Combo14Label = "Slot Number"
Combo13Label = "Bus Number"
Combo12Label = "Current Network Address"
Combo11Label = "Chip Revision"
Combo10Label = "Interrupt Number"
Combo9Label ="Rx Fra&gment Size"
Combo8Label = "Rx &Fragment Number"
Combo7Label = "Driver State"
Combo6Label = "T&x Fragment Number"
Combo5Label = "&Tx Fragment Size"
Combo4Label = "Current Ring Speed"
Combo3Label = "Memory Base Address"
Combo2Label = "Vendor-Device Id"
Combo1Label = "&Ring Speed Detection"
DlgText = "Please select values for the following fields:"
FunctionTitle = $(GenericAdapterName)
DlgType = "RadioCombination"
DlgTemplate = "TLNKP"
Caption = $(FunctionTitle)
CBOptionsGreyed = {}
OptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = 1
Combo1List = $(AutoRingSpeedList)
Combo1Out = $(AutoRingSpeedValue)
Combo4List = $(ConfiguredRingSpeedValue)
Combo4Out = $(ConfiguredRingSpeedValue)
ComboListItemsIn = {Combo1List,Combo4List}
ComboListItemsOut = {Combo1Out,Combo4Out}
EditField = $(NodeAddressValue)
EditLabel = $(NodeAddressLabel)
EditField2 = $(PCIVendorIdValue)
EditField3 = $(MemoryBaseAddrValue)
EditField4 = $(ConfiguredRingSpeedValue)
EditField5 = $(DriverStateValue)
EditField6 = $(InterruptValue)
EditField7 = $(ChipRevisionValue)
EditField8 = $(CurrentNodeAddressValue)
EditField9 = $(BusNumber)
EditField10= $(SlotNumberValue)
EditField11= $(TxFragmentSizeValue)
EditField12= $(TxFragmentNumberValue)
EditField13= $(RxFragmentNumberValue)
EditField14= $(RxFragmentSizeValue)
EditTextIn = {$(EditField),$(EditField2),$(EditField3),$(EditField4), +
$(EditField5),$(EditField6),$(EditField7),$(EditField8), +
$(EditField9),$(EditField10),$(EditField11),$(EditField12), +
$(EditField13),$(EditField14)}
EditTextOut = {$(EditField),$(EditField2),$(EditField3),$(EditField4), +
$(EditField5),$(EditField6),$(EditField7),$(EditField8), +
$(EditField9),$(EditField10),$(EditField11),$(EditField12), +
$(EditField13),$(EditField14)}
EditTextLim = {12,4,4,2,4,2,2,12,2,2,4,4,4,4}
;RCCtlFocusOn = 403
[AutoRingSpeedChoices]
AutoRingSpeedList_1 = "Auto",1
AutoRingSpeedList_2 = "4",4
AutoRingSpeedList_3 = "16",16
[FileDependentDlgNTOLDENG]
NodeAddressLabel = "&Network Address"
Combo1Label = "&Ring Speed Detection"
DlgText = "Please select values for the following fields:"
FunctionTitle = $(GenericAdapterName)
DlgType = "RadioCombination"
DlgTemplate = "TLNKP"
Caption = $(FunctionTitle)
CBOptionsGreyed = {}
OptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = 1
Combo1List = $(AutoRingSpeedList)
Combo1Out = $(AutoRingSpeedValue)
ComboListItemsIn = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditField = $(NodeAddressValue)
EditLabel = $(NodeAddressLabel)
EditTextIn = {$(EditField)}
EditTextOut = {$(EditField)}
EditTextLim = 12
;RCCtlFocusOn = 403
[AutoRingSpeedChoices]
AutoRingSpeedList_1 = "Auto",1
AutoRingSpeedList_2 = "4",4
AutoRingSpeedList_3 = "16",16
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.