Netware Client32 Driver
Introduction:
-------------
This document describes the procedure to install the NetWare Client32
driver for ALL8832 PCI Fast Ethernet adapter.
Location of Driver: \NWSERVER\DC21X4.LAN
Sample Configuration Files:
---------------------------
STARTNET.BAT (Client 32 for DOS will contain):
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\DC21X4.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\DC21X4.LAN FRAME=Ethernet_802.3
LOAD C:\NOVELL\CLIENT32\DC21X4.LAN FRAME=Ethernet_II
LOAD C:\NOVELL\CLIENT32\DC21X4.LAN FRAME=Ethernet_SNAP
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.