************************************************************
************************************************************
*
* Intel(R) Brookdale-G IBM* OS/2* GRADD Display Driver
* Installation Notes
*
* Date: March 15th, 2002
* Revision: OS/2 GRADD Display Driver Release 0219 Build 0001
* Production Version
*
* NOTE: This document refers to systems containing the
* following Intel chipsets:
* Intel(R) Brookdale-G
*
* This document makes references to unannounced products
* being developed by Intel. There are some restrictions
* on how these products may be used and what information
* may be disclosed to others. Please read the Disclaimer
* section at the bottom of this document and contact your
* Intel field representative if you would like more
* information.
*
************************************************************
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. Contents of the Distribution Package
2. System Requirements
3. Installing the Software
4. Verifying Installation of the Software
5. Troubleshooting
6. De-installing the Software
7. Identifying the Software Version Number
************************************************************
* 1. CONTENTS OF THE DISTRIBUTION PACKAGE
************************************************************
The Intel(R) Chipset GRADD display driver provides accelerated
display graphics for PM and Win OS2 applications at SVGA color
depths and resolutions. It also provides monitor selection and
refresh configuration capability.
The Intel(R) chipset GRADD display driver includes system
Components required for GRADD operation, as released by IBM on
08/27/1999 as "BBS Video Build Level 0.080". The installation
will not replace GRADD system components from a more recent
build, as checked by the date of the top component
\os2\dll\gre2vman.dll.
************************************************************
* 2. SYSTEM REQUIREMENTS
************************************************************
1. The system must contain one of the following Intel
chipsets:
Intel(R) Brookdale-G Chipset
2. The following operating system must be installed on the
system:
IBM OS/2 Warp v4 with fixpack 5 or later
IBM OS/2 Warp v4 for Taiwan with fixpack 5 and later
IBM OS/2 Warp v4 for Thailand with fixpack 5 and later
IBM OS/2 Warp v4 for Japan with fixpack 5 and later
IBM OS/2 Warp v3 with fixpak 35 or later
IBM OS/2 Warp v4 for Japan with fixpack 5 or later
IBM OS/2 Warp v3 for Japan with fixpak 35 or later
3. This software has been designed solely for use with
IBM OS/2 Warp v4.0 English with fixpack 5 and later
IBM OS/2 Warp v4.0 for Taiwan with fixpack 5 and later
IBM OS/2 Warp v4.0 for Thailand with fixpack 5 and later
IBM OS/2 Warp v4.0 for Japan with fixpack 5 and later
IBM OS/2 Warp v3.0 English with fixpak 35 or later
IBM OS/2 Warp v3.0 for Japan with fixpak 35 or later
4. The system must be setup in VGA mode. For instructions,
refer to the "De-Installing the Software" section.
To determine the level of IBM OS/2 running, execute SYSLEVEL
command from any IBM OS/2 command prompt.
************************************************************
* 3. INSTALLING AND EXECUTING THE SOFTWARE
************************************************************
INSTALLATION FROM DISKETTE
^^^^^^^^^^^^^^^^^^^^^^^^^^
1. Check the system requirements. IBM OS/2 must be fully
installed and running on the system prior to running this
software. The system must be in VGA mode. If installing
additional fixpacks, do so while the system is in VGA mode.
For instructions on setting the desktop in VGA mode, refer
to the "De-Installing the Software" section. All IBM OS/2
sessions must be closed prior to installing this driver.
2. Insert the Intel GRADD driver diskette into drive A
(or any other diskette drive).
3. Open an IBM OS/2 full-screen or IBM OS/2 window session.
IBM OS/2 version 4 only:
^^^^^^^^^^^^^^^^^^^^^^^
At the IBM OS/2 command prompt, change to drive A:.
Type the following command to copy all
necessary files to the IBM OS/2 drive:
[a:]SETUP <SrcPath> <BootDrive> [/u]
<SrcPath> is the diskette drive.
<BootDrive> is the drive where IBM OS/2 is installed.
[/u] is optional and is used to indicate unattended
install such as for CID installations. A CID response
file is not required.
IBM OS/2 version 3 only:
^^^^^^^^^^^^^^^^^^^^^^^
Requires the setup to be executed from the partition
containing the OS. In IBM OS/2 version 3, copy all
files from the floppy disk to the hard drive.
At the IBM OS/2 version command prompt, type the
following command to copy all necessary files to
the IBM OS/2 drive:
[c:]SETUP <SrcPath> <BootDrive> [/u]
<SrcPath> is the diskette drive.
<BootDrive> is the drive where IBM OS/2 is installed.
[/u] is optional and is used to indicate unattended
install such as for CID installations. A CID response
file is not required.
Then press Enter.
A number of system files will be transferred if the ones
found on the system are older. When a popup asking for
Monitor configuration choice pops up, accept "Use monitor
defaults" choice.
The installation will then blank the screen while testing
VESA modes and if successful, it will transfer driver files.
4. When prompted to do so, remove the diskette from drive A,
perform a shutdown, and then restart your computer.
5. When the system reboots, do the following:
a. Open the IBM OS/2 System folder.
b. Open the System Setup folder.
c. Open the System object.
d. When the Settings notebook appears, select the Screen tab.
e. Select a resolution from the page 1.
f. Select a monitor from page 2.
g. Select refresh setting from the page 1 of the Screen tab.
h. Close the Settings notebook.
i. The selected resolution will be in effect upon the next boot.
INSTALLATION IN A CID ENVIRONMENT
^^^^^^^^^^^^^^^^^^^*^^^^^^^^^^^^^
1. Create a directory on the server (i.e. GRADDS). Copy
the files from the Intel(R) GRADD driver diskette to
the GRADDS directory.
2. IBM OS/2 must have been successfully installed on the
client using the CID (Configuration Installation
Distribution) method.
To install a GRADD driver using CID, use the following
information to modify your LCU command file.
NOTE: The following information is meant as a guide.
Your LCU command file might be different.
/*****************************************************/
/* LCU PRODUCT DATA SECTION */
/*****************************************************/
.
.
.
x.graddvideo = 15
x.15.name='Intel Gradd Video'
x.15.statevar = 'CAS_' || x.15.name
x.15.instprog = 'x:\img\gradds\SETUP.CMD',
' x:\img\gradds ' || bootdrive,
' /u'
x.15.rspdir = ''
x.15.default = ''
/*---------------------------------------------------*/
/* NUMBER OF PROGRAMS SET UP IN THE */
/* PRODUCT DATA SECTION */
/*---------------------------------------------------*/
NUM_INSTALL_PROGS = 15
/*****************************************************/
/* INSTALLATION SECTION */
/*****************************************************/
.
.
.
when OVERALL_STATE = 2 then do
if RunInstall(x.graddvideo) == BAD_RC then exit
Call CheckBoot
end
.
.
.
/******************************************************/
/* ROUTINE SECTION */
/* The following information should already exist in */
/* the LCU command file. */
/******************************************************/
.
.
.
RebootAndGotoState:
parse arg new_state, other
/* Set the state to go in OVERALL_STATE */
rc2 = SetState(new_state, 'RebootAndGotoState', 1)
/* Save the environment vars */
Call SaveStates
/* Reboot the machine */
Call Reboot
return
.
.
.
/*****************************************************/
END OF LCU INFORMATION TO BE ADDED
/*****************************************************/
You may refer to readme.cfg on this diskette for information
on how to setup monitor, resolution and refresh during
CID install.
************************************************************
* 4. VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
1. Open the IBM OS/2 System folder.
2. Open the System Setup folder.
3. Open the System object.
4. When the Settings notebook appears, select the Screen tab.
5. Select Configuration from the page 2. The window will
contain the Intel(R) 815 keyword.
************************************************************
* 5. TROUBLESHOOTING
************************************************************
This section provides troubleshooting information.
Installation problems
---------------------
1. During the installation of this driver, DISPLAY.LOG and
DSPINSTL.LOG files are created in the OS2\INSTALL directory.
These files identify the IBM OS/2 system files that were
updated and indicate whether the installation was successful.
The contents of these files might be useful if you need to
report an installation problem to Intel.
2. Installation of the GRADD uses the Dspinstl utility shipped
with IBM OS/2 4.0. This utility can fail if it finds a
*.dsc file which is not a dspinstl description file. During
testing, it was found that installation of SystemView for
IBM OS/2 client may leave behind a file called "commonag.dsc"
on the root of the bootdrive. This file is not a Dspinstl
description file and will cause Dspinstl to fail. If you have
this problem, simply rename or delete the problem file. If an
incorrect description file is encountered, it will be noted
in the above log(s).
How to determine if the OS/2 GRADD Display Driver is loaded
-----------------------------------------------------------
Refer to section 4: Verifying installation of the software.
Refer to section 7: Identifying the software version number.
************************************************************
* 6. DE-INSTALLING THE SOFTWARE
************************************************************
Use the following procedures to return to VGA mode and
deinstall the software:
1. Turn on your computer. If your computer is already on,
press Ctrl+Alt+Del to restart it.
2. When a small white box appears in the upper left-hand
corner of your screen, press Alt+F1.
3. When the Recovery Choices screen appears, press function
key F3.
4. Your desktop will now boot in VGA mode.
This de-installation procedure is specific only to the
version of the driver and installation file included in this
package.
************************************************************
* 7. IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************
You may execute bldlevel command as follows:
cd \os2\dll
bldlevel intgradd.dll
The Vendor string should read "INT", and the Revision string should be
the same as revision value of this readme. The vendor and revision
strings can also be found in the build.lvl file on the installation
diskette.
************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
* (OEM/IHV Distribution & Single User)
************************************************************
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated
materials (collectively, the "Software") until you have
carefully read the following terms and conditions. By
loading or using the Software, you agree to the terms of
this Agreement. If you do not wish to so agree, do not
install or use the Software.
Please Also Note:
* If you are an Original Equipment Manufacturer (OEM) or
Independent Hardware Vendor (IHV), this complete LICENSE
AGREEMENT applies;
* If you are an End-User, then only Exhibit A, the INTEL
SOFTWARE LICENSE AGREEMENT, applies.
---------------------------------------------------------
For OEMs and IHVs:
LICENSE. Subject to the terms of this Agreement, Intel
grants to You a nonexclusive, nontransferable, worldwide,
fully paid-up license under Intel's copyrights to:
a) use and copy Software internally for Your own
development and maintenance purposes; and
b) copy and distribute Software, including derivative
works of the Software, to Your end-users, but only
under a license agreement with terms at least as
restrictive as those contained in Intel's Final,
Single-User License Agreement, attached as Exhibit A;
and
c) modify, copy and distribute the end-user documentation
that may accompany the Software, but only in
association with the Software.
If You are not the final manufacturer or vendor of a
computer system or software program incorporating the
Software, then You may transfer a copy of the Software,
including derivative works of the Software (and related
end-user documentation), to Your recipient for use in
accordance with the terms of this Agreement, provided such
recipient agrees to be fully bound by the terms hereof. You
shall not otherwise assign, sublicense, lease or in any
other way transfer or disclose Software to any third party.
You shall not reverse-compile, disassemble or otherwise
reverse-engineer the Software.
Except as expressly stated in this Agreement, no license or
right is granted to You directly or by implication,
inducement, estoppel or otherwise. Intel shall have the
right to inspect or have an independent auditor inspect
Your relevant records to verify Your compliance with the
terms and conditions of this Agreement.
CONFIDENTIALITY. If You wish to have a third-party
consultant or subcontractor ("Contractor") perform work on
Your behalf that involves access to or use of Software,
You shall obtain a written confidentiality agreement from
the Contractor that contains terms and obligations with
respect to access to or use of Software no less restrictive
than those set forth in this Agreement and excluding any
distribution rights, and use for any other purpose.
Otherwise, You shall not disclose the terms or existence of
this Agreement or use Intel's name in any publications,
advertisements or other announcements without Intel's
prior written consent. You do not have any rights to use
any Intel trademarks or logos.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and by international
treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software,
or to items referenced therein, at any time without notice,
but is not obligated to support or update the Software.
Except as otherwise expressly provided, Intel grants no
express or implied right under Intel patents, copyrights,
trademarks or other intellectual property rights. You may
transfer the Software only if the recipient agrees to be
fully bound by these terms and if you retain no copies of
the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety
days after delivery by Intel. If such a defect is found,
return the media to Intel for replacement or alternate
delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items
contained within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) RESULTING FROM THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or its
successor. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.
---------------------------------------------------------
EXHIBIT "A"
INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated
materials (collectively, the "Software") until you have
carefully read the following terms and conditions. By
loading or using the Software, you agree to the terms of
this Agreement. If you do not wish to so agree, do not
install or use the Software.
LICENSE. You may copy the Software onto a single computer
for your personal, non-commercial use, and you may make one
back-up copy of the Software, subject to these conditions:
1. You may not copy, modify, rent, sell, distribute or
transfer any part of the Software except as provided in
this Agreement, and you agree to prevent unauthorized
copying of the Software.
2. You may not reverse-engineer, decompile or disassemble
the Software.
3. You may not sublicense or permit simultaneous use of the
Software by more than one user.
4. The Software may contain the software or other property
of third-party suppliers, some of which may be identified
in, and licensed in accordance with, any enclosed
"license.txt" file or other text or file.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies
of the Software remains with Intel or its suppliers. The
Software is copyrighted and protected by the laws of the
United States and other countries, and international treaty
provisions. You may not remove any copyright notices from
the Software. Intel may make changes to the Software, or to
items referenced therein, at any time without notice, but
is not obligated to support or update the Software. Except
as otherwise expressly provided, Intel grants no express or
implied right under Intel patents, copyrights, trademarks
or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by
these terms and if you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered
by Intel on physical media, Intel warrants the media to be
free from material, physical defects for a period of ninety
days after delivery by Intel. If such a defect is found,
return the media to Intel for replacement or alternate
delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE,
THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume
responsibility for the accuracy or completeness of any
information, text, graphics, links or other items contained
within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR
LOST INFORMATION) RESULTING FROM THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT
EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES
OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this
Agreement at any time if you violate its terms. Upon
termination, you will immediately destroy the Software or
return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall
be governed by the laws of California, excluding its
principles of conflict of laws and the United Nations
Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws
and regulations. Intel is not obligated under any other
agreements unless they are in writing and signed by an
authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided
with "RESTRICTED RIGHTS." Use, duplication or disclosure
by the Government is subject to restrictions as set forth
in FAR52.227-14 and DFAR252.227-7013 et seq. or its
successor. Use of the Software by the Government
constitutes acknowledgment of Intel's proprietary rights
therein. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95052.
SLAOEMIHV/RBK/November 4, 1998
************************************************************
************************************************************
* DISCLAIMER
************************************************************
Intel is making no claims of usability, efficacy or warranty.
The INTEL SOFTWARE LICENSE AGREEMENT contained herein
completely defines the license and use of this software.
************************************************************
Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, lifesaving,
or life-sustaining applications.
************************************************************
* Intel Corporation disclaims all warranties and liabilities
* for the use of this document, the software and the
* information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a commitment
* to update the information or software contained herein.
* Intel reserves the right to make changes to this document
* or software at any time, without notice.
************************************************************
* Third-party brands and names are the property of their
respective owners.
Copyright (c) 1998-2000, Intel Corporation. All rights reserved.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.