[CPS5200 - 16 Channel CompactPCI A/D Card]
Function:
cps5200PCIDevInfo
Description:
Retrieve the PCI device information.
int cps5200PCIDevInfo(int DevNo,int* pbase_addr, int* pIRQNo, int* pSlotNo);
DevNo: Device scan order that will be found by PCI device driver.
pbase_addr: Pointer to I/O base address of the device.
pIRQNo: Pointer to device IRQ number.
pSlotNo: Pointer to device slot number.
Remarks:
Call this function to retrieve the AXIOMTEK PCI/Compact PCI devices' information
, such as base address, IRQ number, and slot number. These information will
be used by all the other driver function calls.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200Init
Description:
Initialize the device.
int cps5200Init(int base_addr, int function);
base_addr: I/O base address of the device.
function: Function ID.
Remarks:
This function should be called once before the device performming any data
I/O functions. The function ID could be either of the constants listing below
or any combinition of them:
ID_FUNC_AI
ID_FUNC_AI_IRQ
ID_FUNC_DI
ID_FUNC_DO
ID_FUNC_ALL
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function: cps5200Term
Description:
Terminate the device driver.
int cps5200Term(int base_addr);
base_addr: I/O base address of the device.
Remarks:
This function should be called once if the device will no longer performming
any data I/O functions. Usually at the end of you data acquisition/control
processes.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200GetDevAtbu
Description:
Retrieve the device attribute.
int cps5200GetDevAtbu(LPDEVATBU lpDevAtbu);
lpDevAtbu: Pointer to the DEVATBU struct, which stores the device attribute.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200DI
Description:
Digital input function for a specified channel.
int cps5200DI(int base_addr, int chan, int* data);
base_addr: I/O base address of the device.
chan: Channel to perform DI function.
data: Storage for digital input status.
Remarks:
This function will retrieve the one and only specified channel for it's
digital input status. The status value will stored in the third parameter,
data, where '1' stands for 'HIGH' status, and '0' for 'LOW' one.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200DI_P
Description:
Digital input function for a specified port(8-bit).
int cps5200DI_P(int base_addr, int* data);
base_addr: I/O base address of the device.
data: Storage for digital input status.
Remarks:
This function will retrieve all the digital input status of channels in
the same port at one time.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200DO
Description:
Digital output function for the specified channel.
int cps5200DO(int base_addr, int chan, int data);
base_addr: I/O base address of the device.
chan: channel to proform digital output function.
data: Digital output status.0:LOW, 1:HIGH.
Remarks:
Use this function to output a LOW or HIGH signal to the specified channel.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200DO_P
Description:
Digital output function for a specified port(8-bit).
int cps5200DO_P(int base_addr, int data);
base_addr: I/O base address of the device.
data: Digital output status for a port(8-channel).
Remarks:
Use this function to output signals(LOW/HIGH) at one time for channels in
the same port.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200AI
Description:
Analog input function for specified channel.
int cps5200AI(int base_addr, int chan, int gaincode, float* pfdata);
base_addr: I/O base address of the device.
chan: channel to perform analog input function.
gaincode: Gain code of the device.
pfdata: Pointer to storage of analog input data.
Remarks:
This function uses software triggered method to perform an analog input
function. The gaincode should be set according to the users maunal of the
device.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200IRQStart
Description:
Analog input function for specified channel with interrupt.
int cps5200IRQStart(int base_addr, WORD ScanChan, int GainCode, int IRQNo,
int TrigMode, int Div1, Div2);
base_addr: I/O base address of the device.
ScanChan: Range of Channels to perform analog input function.
GainCode: Gain code of the device.
IRQNo: IRQ number used for generating interrupt.
TrigMode: Trigger method for analog input function.
Div1, Div2: Used to set the sampling rate of the device.
Remarks:
This function should be called before performing analog input function
via interrupt. Ths ScanChan specify the channels to scan. To scan channel
0 to 15, the ScanChan will be 0x000f, ie. from higher byte 00 to lower
byte 0f(15), GainCode should be set according to the users manual of the
device. IRQNo will also be the set as the on board jumper's setting.
TrigMode specified the trigger method as internal or external trig. Div1
and Div2 will be used when internal trigger method was set. And the
sampling rate for each channel will be 1MHz/(Div1*Div2).
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200IRQGetStatus
Description:
Check the writting status of the driver buffer.
int cps5200IRQGetStatus(int IRQNo, int* flag, WORD CheckSize,
WORD* Index1, WORD* Index2);
IRQNo: IRQ number specified in the cps5200IRQStart function.
flag: Pointer to a flag to determine whether the data was ready to get.
CheckSize: Specify the block size of data to check from the driver.
Index1: Pointer to the current writing index of the driver buffer.
Index2: Pointer to the current reading index of the driver buffer.
Remarks:
Use this function to check whether the data was ready inside the driver
buffer. The default buffer size was 4K*2 bytes. Thus the maximun block
size to check should not exceed 2K. If the flag turns to be SET, flag=1,
it's ready to get data with
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200IRQGetData
Description:
Get data from the driver buffer with specified block size.
int cps5200IRQGetData(int IRQNo, int* buffer, WORD size);
IRQNo: IRQ number specified in the cps5200IRQStart function.
buffer: Pointer to a buffer that will then store data from the driver.
size: Block size of buffer to retrive from the driver.
Remarks:
After a call to check the driver buffer status, use this function to get
the data ready in the driver if the status flag is SET. Note that 1 block
size means 2 byte, the buffer pointer passed should have buffer size with
2 times the block size. And the data retrived will still be raw data, call
the raw-to-real convert function to convert the buffer data to real data.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200IRQStop
Description:
Stops the analog input via interrupt function.
int cps5200IRQStop(int IRQNo);
IRQNo: IRQ number specified in the cps5200IRQStart function.
Remarks:
This function should be called after performing analog input via interrupt
function.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Function:
cps5200RawToReal
Description:
Convert data from raw data to real data.
int cps5200RawToReal(int GainCode, float* fBuffer int* iBuffer, WORD size);
GainCode: Gain code used when cps5200IRQStart was called.
fBuffer: Pointer to a buffer that will then store real data.
iBuffer: Pointer to a buffer that stores raw data.
size: Block size of buffer to be converted from raw data to real data.
Remarks:
Use this function to convert the iBuffer data to real data.
Return Values:
This function will return an error code defined in the ERROR CODE LIST of
AXDDR include file(axddr.h). Please be sure to check this returned value to
determine whether the function call succeed or not. If there're no any error
occured, the return value should be ERR_NOERR. Otherwise, the value will be
the one defined in ERROR CODE LIST.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.