1. G-102v2.zip Driver
2. String.ini File Contents

String.ini Driver File Contents (G-102v2.zip)

[Utility]
AppTitle=ZyXEL G-102v2 Utility
MsgTitle=ZyXEL G-102v2 Utility

[BtnCaption]
BtnOk=Ok
BtnCancel=Cancel
BtnClose=Close
BtnBack=Back
BtnNext=Next
BtnSave=Save
BtnBrowse=Browse
BtnRefresh=Refresh
BtnDetail=Detailed Info
BtnConnect=Connect
BtnAdd2Prof=Add To Profile
BtnReconnect=Reconnect
BtnIPRelease=IP Release
BtnIPRenew=IP Renew
BtnSetting=Settings
BtnApplyNow=Apply Now
BtnConfig=Config
BtnCfgCert=Config Certificate
BtnYes=Yes
BtnNo=No

BtnUp=Up(&U)
BtnDown=Down(&D)
BtnAdd=Add(&A)
BtnRemove=Remove(&R)
BtnProperty=Properties(&P)
BtnApply=Apply(&Y)
BtnImport=Import(&I)
BtnExport=Export(&E)

[Menu]
MenuAbout=About...
MenuOpen=Open(&O)
MenuClose=Exit(&X)
MenuUseXP=Turn on zero configuration
MenuUseOur=Turn off zero configuration

[FrameNetwork]
GroupWireless=Wireless Setting
LbCntProf=- Current Profile
LbNetMode=- Network Mode
LbEncryption=- Encryption
GroupTCPIP=TCP/IP Setting
LbIPAddr=IP Address :
LbMask=Subnet Mask :
LbGateway=Gateway :
LbDNS=DNS Server :
LbUseDHCP=Using Static IP
LbNoDHCP=Using DHCP

[FrameProfile]
LbProfList=Profile List(Current profile shows #)
LbPriority=Change Priority
LvProfCol0=Name
LvProfCol1=SSID
LvProfCol2=IP Address

LbAnySSID=ANY
WinIPSet=Windows Setting
UseDHCP=DHCP
RemoveProf=Really remove '%s'?

[FrameSiteSurvey]
LbAvailableNetwork=Available Networks
PanelSearching=Searching ...
LvSiteCol0=SSID
LvSiteCol1=Mode
LvSiteCol2=Strength
LvSiteCol3=Ch
LvSiteCol4=WEP/WPA
LvSiteCol5=BSSID
LbFound=Found
Security_None=X
Security_WEP=WEP
Security_WPA_PSK=WPA-PSK
Security_WPA2_PSK=WPA2-PSK
Security_WPA=WPA
Security_WPA2=WPA2
Security_Radius=RADIUS
NeedSetWEP=Selected network uses WEP.\nPlease configure WEP.
NeedSetWPA=Selected network uses WPA.\nPlease configure WPA.
NeedSetWPAPSK=Selected network uses WPA-PSK.\nPlease configure WPA-PSK.
ConnectSite=This is not applied to profile setting.

[FrameOption]
GroupOption=Options
ChkLaunch=Launch at windows startup
ChkDHCP=Auto DHCP renewal
LbAutoProf=Using auto profile selection
LbNoAutoProf=Not using auto profile selection
ChkWinControl=Let Windows manage this wireless adapter
LbZeroCfg=- Windows Zero Configuration

[FrameVersion]
GroupSW=S/W Information
LbPackageVer=Package Version :
LbDriverVer=Driver Version :
LbUtilityVer=Utility Version :
WEB=http://www.us.ZyXEL.com

GroupHW=H/W Information
LbSupportMode=Supported Mode :
LbMACAddr=MAC Address :
LbSupportCH=Supported Ch :
LbChannel=Ch

[FrameLinkInfo]
GroupLinkInfo=Link Information
LbSSID=- SSID
LbStatus=- Status
LbSpeed=- Link Speed
LbThroughput=- Throughput
LbSignalLev=- Signal Level
LbTrans=Tx
LbReceive=Rx
GroupBSSID=
LbBSSID=BSSID =
LbChannel=Channel =

[FrameBasicSet]
GroupProfName=Profile Name
LbInProfName=Please enter a name for this profile.
LbEx=Ex) Office, My Home
GroupNetworkMode=Network Mode
LbModeInfra=- Network using AP
LbModeAdHoc=- Network between stations without AP
LbMode=Mode
LbChannel=Channel
LbModeDescrp1=Choose infrastructure mode if you are connecting to an access point or
LbModeDescrp2=wireless router. Choose "Ad-Hoc" mode if you are going to connect
LbModeDescrp3=directly to another computer.
GroupSSID=SSID
LbInSSID=Enter SSID of network.
LbSSIDDescrp=If you want to scan possible network, click 'Browse'.

[FrameAdvSet]
GroupPower=
ChkAutoPower=Auto Power Saving Mode
LbPowerSave=Power Saving :
LbPreamble=802.11b Preamble :
LbRTS=RTS Threshold :
LbFRAG=FRAG Threshold :
LbRoaming=Roming Optimization :
GroupTxRate=Data Tx Rate
ChkAutoFallback=Use Auto-Fallback
Lb802bTx=802.11b Tx Rates :
Lb802gTx=802.11g Tx Rates :
Lb802aTx=802.11a Tx Rates :

[FrameSecurity]
GroupSecurity=WLAN Security Configuration
LbSecurity=Security Mode :

GroupAuthen=Authentication Protocal

GroupEncryp=Encryption Method
ChkWEP=Use Static WEP

GroupUserInfo=User Information
LbUserID=User ID :
LbPasswd=Password :
LbMyCert=My Certificate :
LbServerCert=Server Certificate :
LbServerName=Server Name :

GroupPassPhrase=PSK Passphrase
LbPassPhrase=8-63 characters

szNoUserCert=No user certificate
szNoServerCert=No server certificate

[FrameFreq]
GroupFreq=Wireless Protocol
Chk802B=802.11b
Chk802G=802.11g
Chk802A=802.11a
Group802gCfg=802.11g Configuration
LbERP=Non-ERP Protection Mode :
LbSlotTime=Slot Time :

[FrameChipset]
GroupChipset=Chipset Features
LbTxPower=Tx Power Level :
LbAntenna=Antenna Diversity :
ChkSuperA=Super A
ChkSuperG=Super G
ChkXR=XR (eXtended Range)
ChkFrameBurst=Frame Burst

[FrameTCPIP]
GroupTCPIP=TCP/IP Config
ChkIPChanger=Use IP Changer
RBtnDHCP=Use DHCP
RBtnStaticIP=Use static IP below
LbIP=IP Address :
LbMask=Subnet Mask :
LbGateway=Gateway :
LbDNS1=Pri DNS Server :
LbDNS2=Sec DNS Server :

[FrameEnd]
GroupEnd=End
LbCongra=All information was configured.
LbAskApply1=If you want to apply now,
LbAskApply2=Check the box below.
ChkApply=Apply this profile now

[FormProfSet]
CaptoinAdd=ZyXEL G-102v2 Utility Profile Wizard
CaptionEdit='s Properties
TreeItBasic=Basic Settings
TreeItAdv=Advanced Settings
TreeItSecurity=WLAN Security
TreeItFreq=Wireless Protocol
TreeItChip=Chipset Features
TreeItTCPIP=TCP/IP

[FormSiteInfo]
Caption=Detailed Info
LbSSID=SSID :
LbBSSID=BSSID :
LbChannel=Channel :
LbNetworkMode=Network Mode :
LbSecurity=WEP/WPA :
LbSuptRate=Supported Rate(Mb/sec) :
LbPhyLayerType=Physical Layer Type :
LbBeaconPerd=Beacon Period(msec) :

Security_None=Not Using WEP or WPA
Security_WEP=Using WEP
Security_WPA_PSK=Using WPA-PSK
Security_WPA2_PSK=Using WPA2-PSK
Security_WPA=Using WPA
Security_WPA2=Using WPA2
Security_Radius=Using RADIUS

[FormSetAutoProf]
Caption=Auto Profile Selection Setting
ChkNoAuto=Not use this feature
ChkAuto=Use this feature
GroupAutoMethod=Auto selection method
ChkByPriority=According to priority
ChkBySignal=According to signal strength
LbTimeOut=Connection time out(seconds)
ChkShowMessage=Show message when applying auto selected profile

[FormCfgCertificate]
Caption=Configuration Certificate
GroupCertMang=Certificate Management
ChkUserCert=Use User Certificate
ChkServerCert=Validate Server Certificate
LbServerName=Server Name :
ChkExactly=Server name should match exactly

[FormAuthenInner]
Caption=Authentication Protocol Configuration
LbAuthenInner=Inner Protocol :
LbSelInner=Select to inner protocol for

[FormWEPSet]
Caption=WEP Configuration
GroupWEP=Static WEP
LbMethod=WEP Method :
LbAuthen=Authentication :
RBtnPassPhrase=Make key using passphrase
LbPassphraseInfo=- The key generated is a HEX key.
LbPassphrase=Passphrase :

LbManual=Manual Input :
LbASCII=ASCII
LbHEXA=HEXA 
LbChar=char
LbHexChar=char(0-9,A-F)

LbKey1=Key 1 :
LbKey2=Key 2 :
LbKey3=Key 3 :
LbKey4=Key 4 :
LbDefKey=Default Key :

[FormSiteSearch]
Caption=Site Survey

[FormAskAutoProf]
ChkNoAsk=Do not show this message any more
LbPriority=Connecting to '%s' by priority
LbSignal=Connecting to '%s' by signal strength

[Message]
AdapterAtt=Adapter is active
AdapterDet=Adapter is inactive

TrayTipDefault=ZyXEL Configuration Utility
TrayTipActive='%s' is active.
TrayTipInactive='%s' is inactive.
TrayTipNotInstalled='%s' is not installed

DescribeNoSignal=No Signal
DescribePoor=Poor
DescribeGood=Good
DescribeVeryGood=Very Good
DescribeExcellent=Excellent

CreateDefProf="There is no profile. Do you want to make profile now?"

ErEmyProfName=You should enter profile name.
ErSamProfName=%s already exists. Enter another name.
ErSysUseProfName=This profile name is used by system. Enter another name.
ErWEPKey=You have entered an incorrect WEP key. Please try again.
ErWPAPassphrase=Passphrase should be between 8 to 63 charachers.
ErEmptyName=The User ID is empty. Please enter a user name.
ErEmptyPw=The Password is empty. Please enter a password.
ErNoSelBand=No band was selected! \nAt least one band must be selected.


[Common]
Unknow=N/A
dBm=dBm
Kbps=Kbps
Mbps=Mbps
GHz=GHz
Auto=Auto
Scanning=Scanning

Connected=Connected
Connecting=Connecting
DisConnected=Disconnected

Authenticating=Connected
AuthenRetry=Authentication Failed, Retrying...
AuthenFail=Authentication Failed
Authenticated=Authenticated
    
Enabled=Enabled
Disabled=Disabled
Signal=Signal
Quality=Quality
TrustAny=Trust Any
None=None
NotUse=Not Use

Infrastructure=Infrastructure
AdHoc=Ad-Hoc

Encrypt_None=No Encryption
Encrypt_WEP=WEP
Encrypt_WPA_PSK=WPA-PSK
Encrypt_WPA=WPA
Encrypt_Radius=RADIUS
Encrypt_LEAP=LEAP

Encrypt_WPA2_PSK=WPA2-PSK
Encrypt_WPA2=WPA2
Encrypt_WPA_WPA2_PSK=WPA-PSK/ WPA2-PSK
Encrypt_WPA_WPA2=WPA/ WPA2

Authen_None=None
Authen_MD5=MD5
Authen_LEAP=LEAP
Authen_TLS=TLS
Authen_TTLS=TTLS
Authen_PEAP=PEAP

WEP_64=64 bit WEP
WEP_128=128 bit WEP
WEP_152=152 bit WEP

WPA_TKIP=TKIP
WPA_AES=AES

AuthModeOpen=Open
AuthModeShare=Shared
AuthModeAuto=Auto Switch
AuthModeWPA=WPA

EAP_GTC=EAP/GTC
EAP_MSCHAP_2=EAP/MS-CHAP v2

Drv_Encrypt_None=Not Using WEP
Drv_Encrypt_WEP=WEP
Drv_Encrypt_AES=AES
Drv_Encrypt_CKIP=CKIP
Drv_Encrypt_TKIP=TKIP

802B=802.11b
802G=802.11g
802A=802.11a
802G_Trb=802.11g Turbo
802A_Trb=802.11a Turbo

PowSaveNo=No Power Saving
PowSaveMax=Max Power Saving
PowSaveFast=Fast Power Saving

PreambleLong=Long Preamble
PreambleShort=Short Preamble
PreambleAuto=Auto

RoamNo=Do not consider roaming
RoamDef=Default roaming mode
RoamOpt=Optimized in roaming