**************************************************************************
** **
** Software Instructions **
** **
** FUJ02B1 Device Driver V1.21 **
** **
**************************************************************************
These instructions describe how to set up the FUJ02B1 device driver.
The term "select" in the descriptions is used to represent "click
or double-click the left mouse button on the applicable item."
To setup the device driver, follow the steps shown below :
1) If Windows is started, "Unknown Device" will be detected, and
"Found New Hardware Wizard" will be automatically activated.
Open the System Properties (*) from Control Panel, and then click
the Device Manager button on the Hardware tab in the displayed
System Properties screen to display "Device Manager".
After selecting "Other Devices : Unknown Device" from the
displayed list, push the "Delete" key on keyboard to delete the
unknown device.
Delete all the unknown devices in the same way.
Then, Select "Scan for hardware changes" under Action, and
"Unknown Device" is detected and "Found New Hardware Wizard" is
launched automatically.
When "Unknown Device" is not detected even if the above operations
are conducted, installation of the FUJ02B1 device driver is not
required. Stop the operation in this step.
(*)If you can not see "System" icon in Control Panel, click
"Switch to Classic View" on description of Control Panel.
2) Install FUJ02B1 device driver.
A) If you have a floppy disk or CD-ROM of FUJ02B1 device driver,
Select "Install the software automatically (Recommended)"
for "What do you want Windows to do?", and then select "Next>".
B) If you have FUJ02B1 device driver is on Hard disk, select
"Install from a list or specific location (Advanced)"
for "What do you want Windows to do?", and then select "Next>".
In next window, select "Include this location in the search:"
for "Search for the best driver in these locations.", and
Specify the location where the FUJ02B1 driver is stored, and
then select "Next>".
(*) If you have removed two or more "Unknown Devices" in Device
Manager, another device other than FUJ02B1 device may be
detected first. In that case, "Fujitsu FUJ02B1 Device Driver"
will not be displayed even if you specify the correct location
where the FUJ02B1 driver is stored. Follow the steps below to
detect the FUJ02B1 device.
a) Select "Cancel" to exit the current "Found New Hardware
Wizard".
b) The next "Unknown Device" will be detected and a new "Found
New Hardware Wizard" will be activated. If "Unknown Device"
is not detected after the above operations are conducted,
installation of the FUJ02B1 device driver is not required.
Stop the operation in this step.
c) If "Fujitsu FUJ02B1 Device Driver" is displayed following
"Windows driver file search for the device:", the detection
of the device is completed.
In the other case, repeat steps from a) to c).
3) Installation of the driver will be begun.
If the installation is completed, select "Finish" to end the
installation.
All Rights Reserved, Copyright (C) FUJITSU LIMITED 1998-2001.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.