CNET PRO200 PCI Fast Ethernet Adapter NetWare DOS ODI for Workstation Driver Installation Guide ========================================================= Installation Procedure ====================== Before you start with the installation process, make sure that the adapter is properly installed and configured. Besides, make sure that your NetWare Server operating system is properly installed. 1. Execute the following commands in order. LSL DM9PCI IPXODI NETX (or VLM) 2. You can now login to the server. Installation Notes ================== 1. Remember to specify LASTDRIVE=E in the CONFIG.SYS file if using the NETX as DOS requester. (specify LASTDRIVE=Z if using the VLM) 2. Since different versions of Netware servers use different default frame type, please make sure that both server & workstation are using the same frame. 3. A typical NET.CFG is given below. Link SUPPORT Buffers 8 1514 Mempool 4096 Link driver DM9PCI Frame Ethernet_802.2 Frame Ethernet_802.3 Frame Ethernet_II Frame Ethernet_SNAP 4. If you want the driver to be run in a specific mode (10Mbps/100Mbps speed and Half/Full-Duplex Mode), what you need to do is to remove the semi-colon in front of the corresponding mode (100FULL, 100HALF, 10FULL, or 10HALF) in the NET.CFG file. A typical NET.CFG example to run driver on 100Mbps and Full-Duplex mode is given below. Link SUPPORT Buffers 8 1514 Mempool 4096 Link driver DM9PCI Frame Ethernet_802.2 Frame Ethernet_802.3 Frame Ethernet_II Frame Ethernet_SNAP 100FULL The default mode is Auto-Negotiation(N-WAY). And actual transfer mode will be displayed while loading the driver to indicate either TP Full-Duplex, TP (Half-Duplex), LINE SPEED=10 or 100 Mbps.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.