NetWare RPL BOOTROM Installation
================================
Requirement:
CNet CN100TX(F) 10/100 Fast Ethernet BOOTROM
(to purchase a BOOTROM, see our web site http://www.cnet.com.tw)
DOS ODI driver: A:\DOS\CN100F.COM, NET.CFG
Novell Universal Client(VLM)
A. Prepare RPL boot disk image:
1. Create a DOS boot disk
2. Copy Novell VLM files and DOS ODI driver into disk
3. edit config.sys on disk:
LASTDRIVE=Z
DEVICE=HIMEM.SYS
DOS=HIGH
4. edit autoexec.bat
LSL
CN100F
IPXODI
VLM
F:
LOGIN .....(your login procedure)
B. Load disk image on server
1. Login as "admin"
2. Read disk image from A: by "DOSGEN"
3. Set the flag of NET$DOS.SYS to "Sh"
FLAG NET$DOS.SYS +Sh /FO
C. Load RPL service on server
1. Run "load rpl" on server console
2. Bind rpl to the card exp:"bind rpl cn100f"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.