hptcpmon.ini Driver File Contents (6500_arb_win2k_xp.exe)

;
; Used by Standard TCP/IP Port Monitor to determine the type of port
;
;
; Section names should be less than 60 characters
;

[Ports]
 "HP *B.*JETDIRECT EX*"		= HP_JD_EX_1
 "HP *JETDIRECT EX*B.*"		= HP_JD_EX_1
 "HP *JETDIRECT EX*E.*"		= HP_JD_EX_1
 "HP *JETDIRECT EX*F.*"		= HP_JD_EX_1
 "HP *JETDIRECT EX*H.*"		= HP_JD_EX_1
 "HP *JETDIRECT EX*" 		= HP_JD_EX
 "HP *"				= HP_Jetdirect
 "IBM Network*"			= IBM_NP
 "NetportExpress*PRO* 3-port*"  	= Intel_PRO_3
 "NetportExpress*PRO* single*"  	= Intel_PRO_1
 "NB*"				= Canon
 "NetQue*"			= Emulex_ex
 "NETJet*"			= Emulex_MIO
 "Xerox SESS SNMP Agent*"	= Xerox_dcs

[HP_Jetdirect]
PORTS		= 1
NAME		= "Hewlett Packard Jet Direct"
 PROTOCOL1	= "RAW"
PORTNUMBER1	= 9100
 SNMP1		= "?"

[HP_JD_EX_1]
NAME		= "Hewlett Packard JetDirect Ex (ãäÝÐ ÝÑÏí)"
PORTS		= 1
 NAME1		= "Parallel"
 PROTOCOL1	= "RAW"
PORTNUMBER1	= 9100
 SNMP1		= "?"

[HP_JD_EX] 
NAME		= "Hewlett Packard JetDirect Ex (ãäÝÐ ãÊÚÏÏ)"
PORTS		= 3
 PROTOCOL1	= "RAW"
PORTNUMBER1	= 9100
 SNMP1		= "?"
 NAME1		= "Parallel 1"
 COMMUNITYNAME1   = "public"
 protocol2	= "RAW"
portnumber2	= 9101
 snmp2		= "?"
 name2		= "Parallel 2"
 COMMUNITYNAME2   = "public2"
 protocol3	= "RAW"
portnumber3	= 9102
 name3		= "Parallel 3"
 snmp3		= "?"
 COMMUNITYNAME3   = "public3"

[IBM_NP]
PORTS		= 1
NAME		= "ØÇÈÚÉ IBM ááÔÈßÇÊ"
 PROTOCOL1	= "LPR"
 QUEUE1		= "PASS"
 SNMP1		= "Yes"

[Intel_PRO_3]
name		= "Intel Netport Pro (ËáÇËÉ ãäÇÝÐ)"
PORTS		= 3
 NAME1		= "Parallel1"
 QUEUE1		= "PASS_LPT1"
 NAME2		= "Parallel2"
 QUEUE2		= "PASS_LPT2"
 NAME3		= "Serial"
 QUEUE3		= "PASS_COM"
 PROTOCOL1	= "LPR"
 protocol2	= "LPR"
 protocol3	= "LPR"
 SNMP1		= "NO"
 snmp2		= "NO"
 snmp3		= "NO"

[Intel_PRO_1]
name		= "Intel Netport Pro (ãäÝÐ ÝÑÏí)"
PORTS		= 1
 NAME1		= "Parallel1"
 QUEUE1		= "PASS_LPT1"
 PROTOCOL1	= "LPR"
 SNMP1		= "NO"

[Canon]
Name		= "ØÇÈÚÉ Canon ááÔÈßÇÊ"
ports		= 1
 protocol1	= "LPR"
 queue1		= "x"
 snmp1		= "yes"

[Xerox_dcs]
name		= "Xerox DCS"
ports		= 1
 protocol1	= "LPR"
 queue1		= "lp"
 snmp1		= "no"

[Emulex_MIO]
name		= "ÈØÇÞÉ Emulex MIO ÇáÏÇÎáíÉ"
ports		= 1
 protocol1	= "LPR"
 queue1		= "PASSTHRU"
 snmp1		= "NO"

[Emulex_ex]
name		= "Emulex NetQue"
ports		= 2
 name1		= "Parallel"
 protocol1	= "RAW"
portnumber1	= 2501
 snmp1		= "no"
 name2		= "Serial"
 protocol2	= "RAW"
portnumber2	= 2502
 snmp2		= "no"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.74