** NOTE: LAN Manager >REQUIRES< the subdirectory structure which is on this diskette. If users want to copy the LAN Manager driver to another disk, the subdirectory and file structure must be the same. ==================================================== = PRO110(B) PCI-BUS FAST ETHERNET ADAPTER = = Driver Installation Procedure = = >>> LAN Manager Driver, OS/2 Version = ==================================================== The driver for LAN Manager OS/2 version is in the \MSLANMAN.OS2 subdirectory of this diskette. 1. Insert the driver floppy disk into drive A: or B:. 2. In the Group-Main window, click the OS/2 window or OS/2 Full Screen icon. The full screen shell prompt will appear. 3. Change the directory from the root to the subdirectory, LANMAN. 4. Run the SETUP command. 5. Under "Configuration" choose Network Drivers. The user will see the Workstation Configuration window. 6. Click the Add New Config button. 7. To select the driver for installation, click Other Driver under Network Adapter Drivers. 8. Then assign the drive, A: or B:, without path. The driver will be copied to the hard disk. Then, click the OK button. 9. In the window with the title "PRO110(B) PCI Fast Ethernet Adapter" set the network protocol to be NetBeui (or whatever is appropriate) and click Ok. 10. Go back to the Workstation Configuration and confirm the protocols and driver are correct. 11. Save the setting of the configuration in the Configuration Complete window. 12. Check the PROTOCOL.INI file to have a correct line speed and opearting mode. (Please refer to "AUTONEGOTIATION with the attached device" section of the \README.1ST file for the line speed and operating mode.) 13. Reboot. ###Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.