** NOTE: LAN Manager >REQUIRES< the subdirectory structure which is on this
diskette. If users want to copy the LAN Manager driver to another
disk, the subdirectory and file structure must be the same.
====================================================
= PRO110(B) PCI-BUS FAST ETHERNET ADAPTER =
= Driver Installation Procedure =
= >>> LAN Manager Driver, DOS Version =
====================================================
The driver for LAN Manager for DOS is in the \MSLANMAN.DOS subdirectory of
this diskette.
1. Insert this driver diskette into the PC's floppy drive.
2. Run the LAN Manager Setup program in the directory C:\LANMAN.DOS.
3. Select "Configuration" item.
4. Select "Network Drivers" item.
5. Select "Add New Config".
6. Select "Other Driver".
7. Assign source drive A: or B: without path.
8. The message "PRO110(B) PCI Fast Ethernet Adapter" will appear. Click
the OK button. The driver is copied from the floppy to the hard disk.
9. Set Network Protocol (NetBeui or TCP/IP).
10. Reboot the PC.
###
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.