*******************************************************************
Copyright (c) Creative Technology Ltd, 1997. All rights reserved.
*******************************************************************
PC-DVD Driver Setup : Latest Information
========================================
This file contains information not available during the printing of
the manual. Please read its contents before you proceed with the
installation procedure.
This file contains the following sections :
1. Running the Installation Program
2. MSCDEX driver
*****
1. RUNNING THE INSTALLATION PROGRAM
The installation program allows you to set up your drive
under MS-DOS or Windows 95.
To set up your drive in MS-DOS, run INSTALL.EXE at
the DOS prompt.
For Windows 95, run SETUP.EXE
To set up your drive in Windows 95, Click the Start button on
your taskbar, Select Run and type the command line as
A:\SETUP.EXE, where A is your drive letter.
2. MSCDEX.EXE DRIVER
To use your drive under DOS, the Microsoft CD-ROM extension
driver (MSCDEX.EXE) must be loaded.
The installation allows you to search for this driver in your
system. It will then copy this driver to your <dir>\DRV directory
and place a command in your AUTOEXEC.BAT file to load this
driver when your system boots up.
Note : <dir> is your target installation directory.
If you do not have the MSCDEX.EXE driver in your system,option 2
allows you to add a remarked statement in the AUTOEXEC.BAT file.
If you do so, you will then need to obtain this driver from your
vendor and copy it to your <dir>\DRV sub-directory. Finally,
remember to remove "REM" from the command that loads the
MSCDEX.EXE driver in the AUTOEXEC.BAT file.
********** E N D O F R E A D M E **********
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.