1. orc402.exe Driver
2. install.txt File Contents

install.txt Driver File Contents (orc402.exe)

-----------------------------------------------------------
    Installing the OR Client PC Driver on Windows XP
-----------------------------------------------------------

--------------------------------------
              Overview
--------------------------------------
1. Standard Installation
2. Upgrading an existing 802.11 driver

NOTE:
  Some computer manufacturers that ship computers with a
  factory installed version of the Microsoft Windows XP
  operating system, often include a PC Card wizard, that
  enables 'Plug & Play' for the Windows XP operating
  system. If your computer automatically detects the new
  card, you may skip the following section and turn to
  'Enabling Network Support'.

--------------------------------------
1. Standard Installation
--------------------------------------

To install this driver on Windows XP, perform the following 
steps:

1. Insert your PC Card into your laptop or desktop system.
2. Depending on the type of card you have inserted, Windows 
   XP should automatically detect and install the 802.11-only 
   driver that shipped with Windows XP. If so, allow the 
   default driver installation to proceed until finished. 
   This step should take less than two minutes.
3. After Windows XP has completed installation of the default 
   802.11 driver, proceed with the instructions for upgrading 
   an existing 802.11 driver.

--------------------------------------
2. Upgrading an existing 802.11 driver
--------------------------------------

To update an existing driver installation Windows XP, perform 
the following steps:

 1. Open the Windows XP Control Panel and run the "System" 
    control panel applet. 
 2. In the "System" control panel, select the "Hardware" tab, 
    and then click on the "Device Manager" button.
 3. Once "Device Manager" has been launched, click on the "+" 
    sign next to the "Network Adapters" node to list all 
    currently installed network adapters. Your ORiNOCO PC Card
    should be listed there.
 4. Right-click on the ORiNOCO PC Card node, and select the 
    "Update Driver..." option. This will launch the Windows XP
    Hardware Update Wizard.
 5. On the first screen, select "Install from a list or a 
    specific location (Advanced)" and then click "Next".
 6. On the second screen, select "Don't search. I will choose 
    the driver to install." and then click "Next".
 7. On the "Select Network Adapter" (third) screen, click on 
    the "Have Disk" button.
 8. In the "Install From Disk" screen, browse to or enter the 
    path where you unzipped the OR Client PC Driver for Windows
    XP files. After clicking "OK" in the Install From Disk 
    screen, you will return to the "Select Network Adapter" 
    screen. 
 9. Click "Next", and Windows XP will display a warning 
    message telling you that the driver is not digitally 
    signed. Click on the "Yes" button in the message to 
    continue installing the driver.
10. Windows XP will begin to copy the files and install the 
    driver, and then will warn you again that the driver is 
    not digitally signed. Click on "Continue Anyway" and 
    Windows XP will finish the installation.
11. IMPORTANT: If the Windows installer prompts you with a 
    message saying "The target file exists and is newer than 
    the source file." Click "Yes" to overwrite the currently 
    existing file.
12. When installation is complete, Windows XP will display a 
    final message saying that "The wizard has finished 
    installing the software for..." the ORiNOCO PC Card. 
    Click "Finish" to finish installing your driver.
13. !!!IMPORTANT!!!
    Windows XP contains a new feature that enables the operating
    system to control the configuration of the wireless network
    card. Since Windows XP does not know how to set up the 
    radio card to work in TurboCell mode, it is imperative that
    you perform the following steps after installing the driver:
    a. Open up the Windows operating system Control Panel
    b. Open the 'Network Connections' control panel applet
    c. Right-click on the 'Wireless Network Connection' icon,
       and select the 'Properties' selection. The icon will 
       not appear unless your radio card is inserted.
    d. In the 'Wireless Network Connection Properties' screen,
       select the 'Wireless Networks' tab.
    e. In the 'Wireless Networks' tab, make sure that you
       DISABLE (unselect) the checkbox that reads
       'Use Windows to configure my wireless network settings'
    f. Once you have disabled the above checkbox, click OK
       to return to the Network Connections screen.

Once you have installed the software for the OR Client PC 
Driver, and prevented Windows from automatically determining your
wireless network settings, you should install the Client Manager,
and configure your OR Client network settings. You can set up 
the OR Client PC Driver without the Client Manager by opening
the "Wireless Network" control panel applet.