3Com (R) Corporation TokenDisk (R) Diskette for The 3C359 TokenLink Velocity XL PCI Token Ring Network Interface Card Banyan VINES Installation Notes Preliminary Banyan VINES Installations -------------------------------------- The Banyan VINES LAN software installation requires that you input the IRQ assigned to the adapter. To determine the IRQ, perform the following steps: 1. Insert the 3Com TokenLink Velocity PCI TokenDisk diskette in the floppy drive and make that the active drive. 2. At the DOS prompt type: 3PCID [Enter] 3. When the main menu appears, select Install, then Configure NIC and press [Enter]. 4. The Configuration screen appears with the IRQ shown in the Standard Options box. Banyan VINES Installations -------------------------- To install VINES 6.0 software on a DOS NDIS workstation, follow these instructions. DOS must be installed on the target workstation C: drive or you must have a bootable DOS floppy. 1. Use the DOS MD command to create a subdirectory called \VINES. 2. Copy the contents of the VINES LAN S/W (DOS) Install diskette into the \VINES subdirectory. 3. Copy the contents of the NDIS subdirectory on the VINES LAN S/W (DOS) 2 of 2 diskette into the \VINES subdirectory. 4. Copy the TLPN2.DOS, TLNKP.MAC, and the PROTOCOL.INI fragment from the NDIS2\DOS subdirectory on the TokenDisk diskette #2 to the \VINES subdirectory. 5. Edit the PROTOCOL.INI file to read as follows: [PROTOCOL MANAGER] DRIVERNAME = PROTMAN$ [VINES_XIF] DRIVERNAME = NDISBAN$ BINDINGS = TLPN2 [TLPN2] DRIVERNAME = TLPN2$ 6. Run the PCCONFIG.EXE program located in the \VINES subdirectory. 7. Select option 1, Network Card Settings. 8. Select the NDIS Token Ring option. 9. The NDIS Workstation screen appears. Enter the interrupt request number (IRQ) assigned to the 3Com TokenLink Velocity PCI NIC. Return to the Main Menu by pressing F10 twice. While still in PCCONFIG.EXE select "Login Environment Settings" from Main Menu and press ENTER. Choose "Select Default Communications driver" and press ENTER. Scroll down and choose "NDIS Token Ring". Exit from PCCONFIG. Press F10 to save the new settings. 10. Edit the CONFIG.SYS file and add the following lines, substituting A: for C: for a floppy disk installation. DEVICE = C:\VINES\PROTMAN.DOS /I:C:\VINES DEVICE = C:\VINES\TLPN2.DOS 11. Insert the following lines in the AUTOEXEC.BAT file. CD \VINES BAN BAN loads the NDISBAN drivers and reads the PCCONFIG.DB file to invoke changes made during the PCCONFIG stage. (%VER BANYAN.TXT - Banyan VINES v1.0c)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.