************************************************************ ************************************************************ * * Intel(R) 815 Chipset Driver for Microsoft* Windows* NT* 4.0 * Installation Readme * * NOTE: This document refers to systems containing the * following Intel chipset: * * Intel(R) 810/810E Chipset * Intel(R) 815 Chipset * * Date: February 28, 2000 * * This document makes references to unannounced products * being developed by Intel. There are some restrictions * on how these products may be used, and what information * can be disclosed to others. Please read the Disclaimer * section at the bottom of this document, and contact your * Intel field representative if you would like more * information. * * ************************************************************ ************************************************************ ************************************************************ * CONTENTS OF THIS DOCUMENT ************************************************************ This document contains the following sections: 1. System Requirements 2. Localized Language Abbreviations 3. Installing the Software 4. Verifying Installation of the Software 5. De-installing the Software 6. Identifying the Software Version Number ************************************************************ * 1. SYSTEM REQUIREMENTS ************************************************************ 1. The system must contain one of the following Intel chipsets: Intel(R) 810 Chipset GMCH A-2,A-3 Intel(R) 815 Chipset GMCH A-0 2. 64 MB of system memory is required to install this driver. 3. There should be sufficient hard disk space in the <TEMP> directory (typically C:\TEMP) on the system to install this software. The Microsoft Windows NT 4.0 INF files included with this distribution package are designed to function with the following versions of Microsoft Windows NT 4.0: Microsoft Windows NT 4.0 4.00.1381 (with Service Pak 4) Please check with your system provider to determine the operating system and Intel chipset used in your system. ************************************************************ * 2. LOCALIZED LANGUAGE ABBREVIATIONS ************************************************************ The following list is the abbreviations of all languages that the driver has been localized in. You may have to refer to this section while using this document. ptb -> Brazilian Portuguese dan -> Danish nld -> Dutch eng -> English fin -> Finnish fra -> French frc -> French Canadian deu -> German ita -> Italian enu -> International English jpn -> Japanese kor -> Korean chs -> Mainland Chinese plk -> Polish ptg -> Portuguese cht -> Traditional Chinese nor -> Norwegian rus -> Russian esn -> Spanish esm -> Spanish Mexican sve -> Swedish tha -> Thai esp -> Traditional Spanish ************************************************************ * 3. INSTALLING THE SOFTWARE ************************************************************ General Installation Notes: 1. The operating system must be installed prior to the installation of the driver. 2. This installation procedure is specific only to the version of driver and installation file included in this release. 3. You can choose four different methods of installation for this release. The file you need to download for each are indicated in the appropriate section. 1) InstallShield* (automated) install from hard drive See Section 3.1. 2) InstallShield (automated) install from CD-ROM See Section 3.1. 3) Manual Install from hard drive See Section 3.2. 5) Manual Install from CD-ROM See Section 3.2. 3.1 INSTALLSHIELD (AUTOMATED) INSTALL FROM CD-ROM or HARD DRIVE 1. Download WINNT4CD.ZIP from the web. Double-click to unzip (you must have WinZip* installed; download from www.winzip.com). Hit the Extract button and indicate the directory into which the files are to be extracted. Hit the Extract button to unzip the files to that directory. 2. At this point you have two intall options: If you wish to install from a CD, copy the entire contents, including subdirectories, of the directory where you unzipped the WINNT4CD.ZIP file. Insert the CD-ROM into the drive. If autorun is enabled, the installer will begin automatically. Otherwise, enter the graphics directory on the CD-ROM and double-click SETUP.EXE. If you wish to install from the hard drive, enter the directory into which you unzipped the WINNT4CD.ZIP file. Enter the graphics subdirectory and doublclick SETUP.EXE. 3. Click "Next" on the Welcome screen. 4. Read the license agreement and click "Yes" to continue. 5. This screen indicates the directory in which the End-User Diagnostic Utility files will be stored. NOTE: The graphics driver is not installed here. (It is installed in the appropriate Windows system directories.) Only the EUD utility files are installed here. If you wish to change the directory in which the EUD will be stored, click "Browse" and change the directory. Click "Next" to continue. 6. The driver files will now be installed. When the install finishes, choose the "Yes" to reboot option, and click "Finish" to restart your computer. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the "Verifying Installation" section below. 3.2 MANUAL INSTALL FROM CD-ROM OR HARD DRIVE 1. Download WINNT4CD.ZIP from the Web. Double-click to unzip. (You must have WinZip installed; download it from www.winzip.com.) Hit the Extract button and indicate the directory into which the files are to be extracted. Hit the Extract button to unzip the files to that directory. If you wish to install from the CD-ROM, then the files must be transferred to a CD. 2. Select the My Computer icon, Control Panel icon, and then the Display icon. 3. Select the Settings tab, and then click the Display Type button. 4. Press the Change button in the Adapter Type section of the window, and then click the Have Disk button. 5. Press the Browse button and go to the Graphics folder on the CD or the hard drive. Select the WinNT4 folder. To install the English version of the driver, select the i81xNT4.INF file. For additional languages, enter the Inf folder and choose the appropriate language. 6. A new window, Install from Disk, should appear. Click "OK". 7. Another window, Change Display, should open, listing the available display types. Choose Intel Corporation 815 Graphics Controller Hub and press OK. 8. Click "Next". The driver should install. Click Finish when done. 9. Close all open windows and click "Yes" to reboot. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the Verifying Installation section below. ************************************************************ * 4. VERIFYING THE INSTALLATION OF THE SOFTWARE ************************************************************ 1. Select the My Computer icon, the Control Panel icon, and then the Display icon. 2. You should now be in the Display Properties window. Select the Settings tab, and click on the Display Type button. 3. You should be in the Display Type window. The appropriate version number should be listed. If not, then a different driver is being used. ************************************************************ * 5. DE-INSTALLING THE SOFTWARE ************************************************************ Note that this procedure assumes that the above installation process was successful. This de-installation procedure is specific only to the version of the driver and installation file included in this package. 1. From the Microsoft Windows NT 4.0 desktop, click on My Computer, Control Panel, and then Display. 2. You should be in the Display Properties window. Click on the Settings tab and then the Display Type button. 3. The Display Type page should appear. Now select the Change... button. 4. The Change Display page appears. In the split window under "Manufacturers", select "Standard display type". In the other window, select "VGA compatible display adapter". Now select "OK". 5. The Files Needed screen should appear. If needed, point to the NT install CD-ROM location and click "OK". 6. The Installing Drivers page should appear, stating that, "The drivers were successfully installed." Click "OK". Click "Close" on the Display Driver screen, and then "Close" in Display Properties. 7. When prompted, reboot the system as directed, in order for the changes to take effect. ************************************************************ * 6. IDENTIFYING THE SOFTWARE VERSION NUMBER ************************************************************ 1. Select the My Computer icon, the Control Panel icon, and then the Display icon. 2. You should now be in the Display Properties window. Select the Settings tab, and click on the Display Type button. 3. You should be in the Display Type window. The appropriate version number should be listed. If not, then a different driver is being used. ************************************************************ * INTEL SOFTWARE LICENSE AGREEMENT * (OEM/IHV Distribution & Single User) ************************************************************ IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. Please Also Note: * If you are an Original Equipment Manufacturer (OEM) or Independent Hardware Vendor (IHV), this complete LICENSE AGREEMENT applies; * If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies. --------------------------------------------------------- For OEMs and IHVs: LICENSE. Subject to the terms of this Agreement, Intel grants to You a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel's copyrights to: a) use and copy Software internally for Your own development and maintenance purposes; and b) copy and distribute Software, including derivative works of the Software, to Your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single-User License Agreement, attached as Exhibit A; and c) modify, copy and distribute the end-user documentation that may accompany the Software, but only in association with the Software. If You are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then You may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation), to Your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof. You shall not otherwise assign, sublicense, lease or in any other way transfer or disclose Software to any third party. You shall not reverse-compile, disassemble or otherwise reverse-engineer the Software. Except as expressly stated in this Agreement, no license or right is granted to You directly or by implication, inducement, estoppel or otherwise. Intel shall have the right to inspect or have an independent auditor inspect Your relevant records to verify Your compliance with the terms and conditions of this Agreement. CONFIDENTIALITY. If You wish to have a third-party consultant or subcontractor ("Contractor") perform work on Your behalf that involves access to or use of Software, You shall obtain a written confidentiality agreement from the Contractor that contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose. Otherwise, You shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements or other announcements without Intel's prior written consent. You do not have any rights to use any Intel trademarks or logos. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and by international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material, physical defects for a period of ninety days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) RESULTING FROM THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its successor. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. --------------------------------------------------------- EXHIBIT "A" INTEL SOFTWARE LICENSE AGREEMENT (Beta, Single User) IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. LICENSE. You may copy the Software onto a single computer for your personal, non-commercial use, and you may make one back-up copy of the Software, subject to these conditions: 1. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software. 2. You may not reverse-engineer, decompile or disassemble the Software. 3. You may not sublicense or permit simultaneous use of the Software by more than one user. 4. The Software may contain the software or other property of third-party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed "license.txt" file or other text or file. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material, physical defects for a period of ninety days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS," WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) RESULTING FROM THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its successor. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. SLAOEMIHV/RBK/November 4, 1998 ************************************************************ ************************************************************ * DISCLAIMER ************************************************************ Intel is making no claims of usability, efficacy or warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained herein completely defines the license and use of this software. ************************************************************ Information in this document is provided in connection with Intel products. Except as expressly stated in the INTEL SOFTWARE LICENSE AGREEMENT contained herein, no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products, including liability or warranties relating to fitness for a particular purpose, merchantability or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, lifesaving, or life-sustaining applications. ************************************************************ * Intel Corporation disclaims all warranties and liabilities * for the use of this document, the software and the * information contained herein, and assumes no * responsibility for any errors which may appear in this * document or the software, nor does Intel make a commitment * to update the information or software contained herein. * Intel reserves the right to make changes to this document * or software at any time, without notice. ************************************************************ * Third-party brands and names are the property of their respective owners. Copyright (c) Intel Corporation, 1998-2000Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.