ATA.SYS - PCMCIA ATA disk driver v1.1 12-17-96 Copyright (c) 1996 Datalight, Inc. Usage: ATA.SYS [/AXXXX] [/IXXXX] /AXXXX Replace XXXX with the memory segment to use Defaults to CC00 /IXXXX Replace XXXX with the IO address to use Defaults to 240 Requires an Intel 82365 or compatible controller. Only supports 5 volt ATA cards. Supports up to 2 drives. Use ROM-DOS FORMAT to format an ATA disk, if not already formatted. Fully hot-swappable. ATA Cards tested: Integral 1841PA 17MB ATA card 660KB/s write, 690KB/s read Toshiba TH6SS160201AA 20MB ATA card 900KB/s write, 1200KB/s read SanDisk SDCFB 4MB CompactFlash card 300KB/s write, 1000KB/s read SanDisk SDP3B 2MB ATA card 275KB/s writem 1000KB/s read Controllers tested: Vadem VG-465 Intel 82365SL rev ADownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.