1. HPT366_Driver_W2k_1210beta.exe Driver
2. README2.TXT File Contents

README2.TXT Driver File Contents (HPT366_Driver_W2k_1210beta.exe)

                HPT366 Device Driver for Microsoft Windows 2000 (BETA 3)

               Copyright (c) 1995-1999 HighPoint Technologies, Inc.
                        All Rights Reserved
                              Version 1.21.0
                               


O V E R V I E W :
****************************************************************************
There are 8 files related to the HPT366 Device Driver for Microsoft
Windows 2000 RC2:

    1.  HPT366.INF    The Windows 2000 installation file.
    2.  README2.TXT   This file.

    3.  HPT366.SYS    The driver file.
    4.  TXTSETUP.OEM  The Windows NT 4.0 Installation file.
    5.  README.TXT    The Windows NT 4.0 driver's readme file.
    6.  OEMSETUP.INF  The Windows NT 4.0 Installation file.
    7.  HPT366.TAG    
    8.  DISK1   

I N S T A L L I N G  T H E  D R I V E R:
****************************************************************************
This installation procedure is specific only to the current version of the 
driver and installation file. 

NOTE:  
  1.The driver (HPT366.SYS) and installation file (HPT366.INF) must be
    located on the same directory of the install floppy diskette.

  2.Users need to install HPT366 driver for Windows 2000 twice for each 
    HPT366 host adapter since each contains two functions.


Usually, when you plug the HPT366 Ultra DMA 66 host adapter into your system and
boot up the Windows 2000 system, the system will be able to detect the HPT366
Ultra DMA host Adapter automatically and ask you to install the driver for HPT366.
You can just follow the instructions promted by the system to install the 
driver.

Otherwise, you can install the driver by the following steps:

1.  Windows 2000 must be installed on the system prior to installing the
    driver.

2.  Close any running applications.
 
3.  Open "My Computer".

4.  Double click on the "Control Panel" icon.

5.  Double click on the "Systeme" applet.

6.  Click on the "Hardware" button.

7.  Click on the "Device Manager" button.

8.  There is a Window listing hardware types, select the "SCSI and RAID controllers"
    then double click it.

9.  There is a Window listing drivers types, select the "HPT366 Ultra DMA 66 controllers"
    then click the right key of mouse.

10.  Double Click on the "Properties".

11.  Click on the "Driver" button.

12.  Click on the "Update Driver" button.

13.  Select "Search for a suitable driver for my device", then Click on the "Next" button.

14.  Select "Floppy disk drivers" and Insert the HPT366 Windows2000 driver disk
     into A:. then Click on the "Next" button.

15.  The wizard found HPT366 Ultra DMA 66 Controllers, Click on the "Next" button.

16.  To Continue, Click on the "Next" button. 

17.  Completing the Upgrade Device Driver Wizard. Click on the "Finish" button.

18.  Restar the System.



U N - I N S T A L L I N G  T H E  D R I V E R :
****************************************************************************
You can use the device manager in the System control panel to remove the
driver.



****************************************************************************
CONTACTING HIGHPOINT
****************************************************************************

    HighPoint Technologies, Inc.
    4450 Enterprise Street, Suite #101
    Fremont, CA 94538

    Tel: (510) 623-0841 (Technical Support Line) 
    Fax: (510) 490-4578

    E-mail: support@highpoint-tech.com
    World Wide Web:  http://www.highpoint-tech.com


****************************************************************************
****************************************************************************

COPYRIGHT
   Copyright (c) 1995-1999  HighPoint Technologies, Inc. All rights
   reserved. No part of this README file may be reproduced, stored
   in a retrieval system, or transmitted in any form or by any means,
   electronic, mechanical, photocopying, recording or otherwise,
   without the prior written consent of HighPoint Technologies, Inc.

TRADEMARKS
   All trademarks are owned by their respective owners.

CHANGES
   The material contained within this document is for informational use 
   and is subject to change without notice. While reasonable efforts have
   been made in the preparation of this document to assure its accuracy,
   HighPoint Technologies, Inc. assumes no liability resulting from errors
   or omissions in this document, or from the use of the information
   contained herein.

   HighPoint Technologies, Inc. reserves the right to make changes in
   the product design without reservation and without notification to
   its users.

LIMITATION OF LIABILITY:
   IN NO EVENT WILL HIGHPOINT BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
   INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR
   INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
   THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, HIGHPOINT SHALL NOT
   HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED/USED WITH
   THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, OR 
   RECOVERING SUCH HARDWARE, OR DATA.