1. Installation of Device Driver
(1) The device driver in this diskette is only for MS-DOS mode.
Windows95/98 automatically detect and install the DVD-ROM drive.
(2) Installation
1) Change prompt to the 3.5" floppy disk.
ex) C:\>a:
A:\>_
2) Excute Install.exe file
ex) A:\>install
3) Type 'y' when your system asks as 'Install Device Driver Now?'
ex) Install Device Driver Now?[Y/N] Y
4) After the above, the install program makes a directory(DVS)
and copy Device Driver and MSCDEX.EXE files.
After copying the files, prompt changes as below.
ex) C:\DVS>
5) If MSCDEX.EXE does not exist in your system(ex. C:\WINDOWS\COMMAND
or C:\DOS or any directory), Installation program cannot copy this file.
You can copy MSCDEX.EXE from another system.
2. Confirmation of Device Driver Installation
(1) All of the above installation is done, please check whether
the two files (DVS.SYS and MSCDEX.EXE) are in the 'DVS'
directory or not.
(2) Next, you need to check environment files as followings.
1) CONFIG.SYS
The installation program automatically makes a line, as below,
in the CONFIG.SYS file. If your system has another device driver
for CD-ROM, installation program automatically make it remark.
ex) DEVICE = C:\DVS\DVS.SYS /D:DVSDVD01
2) AUTOEXEC.BAT
The installation program automatically makes a line, as below,
in the AUTOEXEC.BAT file. If your system has another device
driver for CD-ROM, installation program automatically make it
remark.
ex) LH MSCDEX /D:DVSDVD01
(3) In case of improper installation by any reason, you can manually
change CONFIG.SYS and AUTOEXEC.BAT files.
(4) If you need 'multi boot configure' or other extraordinary usage,
please refer to MS-DOS User's Manual.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.