1. Groove.zip Driver
2. SCD2S_98.inf File Contents

SCD2S_98.inf Driver File Contents (Groove.zip)

;; SCD2S.inf - INF file for Still Image interface
;;
;; Copyright (c) 2002, NuCam Corp.
;

[Version]
Signature   = "$CHICAGO$"
Class       = Image
ClassGUID   = {6bdd1fc6-810f-11d0-bec7-08002be2092f}
Provider    = %Provider%
;CatalogFile = SCD2.cat
DriverVer   = 12/12/2002,1
LayoutFile=Layout.inf, Layout1.inf, Layout2.inf

[DefaultInstall]
CopyFiles=SCDELUXE.Files, SCDELUXE.STIFiles

[DestinationDirs]
DefaultDestDir=10,system

SCDELUXE.Files=10,system32\drivers
SCDELUXE.STIFiles=11

[SourceDisksNames]
1=%DiskDescription%,SCD2S.inf,,

[SourceDisksNames.x86]
1=%DiskDescription%,SCD2S.inf,,

[SourceDisksFiles]
se402sc.sys  = 1
scd2usd.dll  = 1
scd2wia.dll  = 1
epwiaui.dll  = 1
epavisrc.ax  = 1
epwavdst.ax  = 1
SCGroove.ax  = 1

[ControlFlags]
ExcludeFromSelect=*
      
[Manufacturer]
%Manufacturer%=Models
      
[Models]
%szProductDeviceDesc%=SCDELUXE, USB\VID_0C77&PID_1012&MI_01
      
[PreCopySection]
HKR,,NoSetupUI,,1

[SCDELUXE]
DriverVer  = 12/12/2002,1
AddReg     = SCDELUXE.AddReg, SCDELUXE.AddReg.Basic, SCDELUXE.AddReg.Register
;DelFiles   = SE402SC.DelDrivers
;CopyFiles  = SCDELUXE.Files, SCDELUXE.STIFiles

SubClass   = StillImage

; DeviceType should be set to 1 = scanner or 2 = camera.
DeviceType = 2

; Device SubType is Vendor-unique
DeviceSubType = 0x1

; Capabilities is a mask:
; 0x01 = Device generates events
; 0x02 = Polling needed
; 0x04 = Generate event when device installed
; 0x08 = Enable the "auto" port option
; 0x10 = WIA capable driver
; 0x20 = Driver has reduced functionality
Capabilities = 0x00000003

; To Enable additional property pages for this device in the CPL, add this
; PropertyPages = "se402sc.cpl ,EnumStiPropPages"
DeviceData   = SCDELUXE.DeviceData
ICMProfiles  = "sRGB Color Space Profile.icm"

[SCDELUXE.NT]
AddReg     = SCDELUXE.AddReg, SCDELUXE.AddReg.Basic, SCDELUXE.AddReg.Register.NT
DelFiles   = SE402SC.DelDrivers
CopyFiles  = SCDELUXE.Files, SCDELUXE.STIFiles

SubClass   = StillImage

; DeviceType should be set to 1 = scanner or 2 = camera.
DeviceType = 2

; Device SubType is Vendor-unique
DeviceSubType = 0x1

; Capabilities is a mask:
; 0x01 = Device generates events
; 0x02 = Polling needed
; 0x04 = Generate event when device installed
; 0x08 = Enable the "auto" port option
; 0x10 = WIA capable driver
; 0x20 = Driver has reduced functionality
Capabilities = 0x00000013

; To Enable additional property pages for this device in the CPL, add this
; PropertyPages = "se402sc.cpl ,EnumStiPropPages"
DeviceData   = SCDELUXE.DeviceData
ICMProfiles  = "sRGB Color Space Profile.icm"

[SCDELUXE.NT.Services]
AddService=SCDELUXES, 0x00000002, SCDELUXE.AddService

[SCDELUXE.DeviceData]
Server=local
STIHardwareID=%STIHardwareID%
TwainDS=%TWAINDSID%
;LEAVE THIS OUT FOR NOW. UI Class ID={DF339FEC-10E0-4e35-B66F-65A9907FE570}
CameraIndexFilename=%CameraIndexFilename%
;for internal debugging use only
IgnoreImageDecodeErrors=0
;if 1, this informs StillImage Monitor app to create index file from camera memory
CreateIndexFile=0
;if TRUE, prevents the still image app from issuing the StartAVICreator event
SkipStartAVICreator=True
;if TRUE, prevents the still image app from issuing the StartImageEditor event
;SkipStartImageEditor=True
;if 1, this informs A/V creation process to read data from index file (instead of camera)
;UseIndexFileForAVImages=1
;if 1, this informs TWAIN Data Source to read data from index file (instead of camera)
;UseIndexFileForImages=1
;AVI_NOTE - if 1, this informs TWAIN Data Source to create RAW AVIs (instead of compressed RGB)
;CreateRAWAVIs=1
;--------------------------------------------------------------------

[SCDELUXE.AddReg]
HKR,,WdmDeviceDesc,,%szProductDeviceDesc%
; this allows TWAIN Driver to support this device
; this USB ID should also appear in the TWAIN INI file under '[TWAIN Supported Devices]'
HKLM,"Software\Endpoints\TWAIN Data Source\1.0\Cameras\0x0C771012"

[SCDELUXE.AddReg.Basic]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,se402sc.sys

; these register our STI USD
HKR,,USDClass,,"{06381870-F963-4bd0-AB51-1BED9FA3055D}"
HKR,,CLSID,,"{06381870-F963-4bd0-AB51-1BED9FA3055D}"
HKCR,CLSID\{06381870-F963-4bd0-AB51-1BED9FA3055D} ,,,"Endpoints Camera Still Image USD"
HKCR,CLSID\{06381870-F963-4bd0-AB51-1BED9FA3055D}\InProcServer32,,,%11%\scd2usd.dll
HKCR,CLSID\{06381870-F963-4bd0-AB51-1BED9FA3055D}\InProcServer32,ThreadingModel,,"Both"

; these register our WIA MiniDriver
HKCR,CLSID\{3FE1CB1C-C8FE-49e7-A266-CC077F9E9E1F} ,,,"Endpoints Camera WIA MiniDriver"
HKCR,CLSID\{3FE1CB1C-C8FE-49e7-A266-CC077F9E9E1F}\InProcServer32,,,%11%\scd2wia.dll
HKCR,CLSID\{3FE1CB1C-C8FE-49e7-A266-CC077F9E9E1F}\InProcServer32,ThreadingModel,,"Both"

; these register our WIA Extension DLL
HKCR,CLSID\{DF339FEC-10E0-4e35-B66F-65A9907FE570} ,,,"Endpoints Camera WIA UI Extensions"
HKCR,CLSID\{DF339FEC-10E0-4e35-B66F-65A9907FE570}\InProcServer32,,,%11%\epwiaui.dll
HKCR,CLSID\{DF339FEC-10E0-4e35-B66F-65A9907FE570}\InProcServer32,ThreadingModel,,"Apartment"
HKCR,CLSID\{DF339FEC-10E0-4e35-B66F-65A9907FE570}\shellex\ContextMenuHandlers\{DF339FEC-10E0-4e35-B66F-65A9907FE570}

; this allows the device to be found by the STI Control Panel
HKR,,CreateFileName,,%StiUSDDeviceName%

[SCDELUXE.AddReg.Register]
HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_Endpoints_StillCam_AVI_Source",,"regsvr32.exe /s %11%\epavisrc.ax"
HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_Endpoints_StillCam_WAV_Filter",,"regsvr32.exe /s %11%\epwavdst.ax"

[SCDELUXE.AddReg.Register.NT]
HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_Endpoints_StillCam_AVI_Source",,"rundll32.exe %11%\epavisrc.ax,DllRegisterServer"
HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_Endpoints_StillCam_WAV_Filter",,"rundll32.exe %11%\epwavdst.ax,DllRegisterServer"

[SCDELUXE.AddService]
DisplayName    = %szProductDeviceDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\se402sc.sys
LoadOrderGroup = Base

[SE402SC.DelDrivers]
se402sc.sys,,,1
scd2usd.dll
scd2wia.dll
epwiaui.dll
epavisrc.ax
epwavdst.ax

[SCDELUXE.Files]
;se402sc.sys

[SCDELUXE.STIFiles]
;scd2usd.dll
;scd2wia.dll
;epwiaui.dll
;epavisrc.ax
;epwavdst.ax
;SCGroove.ax

[Strings]
Provider     = "NuCam Corp."
Manufacturer = "NuCam Corp."

; This description should be less than 32 chars (for TWAIN driver)
szProductDeviceDesc = "SiPix StyleCam Groove (still)"

StiUSDDeviceName="\\.\EPSE402SC"

; if multiple values are required, separate them with spaces
STIHardwareID="0x0C771012"

; this specifies the filename used to store the camera memory
CameraIndexFilename="se402sc.idx"

; This must match the name embedded in the Endpoints TWAIN DS (or INI file)
TWAINDSID="StyleCam Groove"

DiskDescription="SiPix StyleCam Groove Drivers Disk"