SCD2V.inf Driver File Contents (Groove.zip)

;; SCD2V.inf - INF file for Video Interface
;;
;; Copyright (c) 2002, NuCam Corp.
;

[Version]
signature   = "$CHICAGO$"
Class       = Image
ClassGUID   = {6bdd1fc6-810f-11d0-bec7-08002be2092f}
Provider    = %Provider%
CatalogFile = SCD2.cat
DriverVer   = 12/06/2002,1
LayoutFile=Layout.inf, Layout1.inf, Layout2.inf

[ControlFlags]
; All PnP devices should be excluded from manual AddDevice Applet list
ExcludeFromSelect=*

[Manufacturer]
%Manufacturer%=Models

[DestinationDirs]
DefaultDestDir=10,system

; Delete old Win95 and "Detroit" update drivers
SCDELUXE.DelDrivers=10,system

SCDELUXE.CopySystemDrivers=10,system32\drivers

SCDELUXE.CopyCODEC=11

[SourceDisksNames]
1=%DiskDescription%,SCD2V.inf,,

[SourceDisksNames.x86]
1=%DiskDescription%,SCD2V.inf,,

[SourceDisksFiles]
se402vc.sys  = 1
ep_camd.sys  = 1
SCGroove.ax  = 1

[Models]
%szProductDeviceDesc%=SCDELUXE,USB\VID_0C77&PID_1012&MI_00

[SCDELUXE]
DriverVer=  12/06/2002,1
Include=    ks.inf, kscaptur.inf, ksfilter.inf
Needs=      KS.Registration,KSCAPTUR.Registration,MSPCLOCK.Installation
AddReg=     SCDELUXE.AddReg, SCDELUXE.AddReg.Basic
UpdateInis= SCDELUXE.UpdateIni
DelFiles=   SCDELUXE.DelDrivers
CopyFiles=  SCDELUXE.CopySystemDrivers, SCDELUXE.CopyCODEC

[SCDELUXE.NT]
Include=    ks.inf, kscaptur.inf
Needs=      KS.Registration,KSCAPTUR.Registration.NT
AddReg=     SCDELUXE.AddReg, SCDELUXE.AddReg.Basic
UpdateInis= SCDELUXE.UpdateIni
DelFiles=   SCDELUXE.DelDrivers
CopyFiles=  SCDELUXE.CopySystemDrivers, SCDELUXE.CopyCODEC

[SCDELUXE.AddReg]
HKR,,WdmDeviceDesc,,%szProductDeviceDesc%
; this allows TWAIN Driver to support this device
HKLM,"Software\Endpoints\TWAIN Data Source\1.0\Cameras\0x0C771012"
; VfW Extension data for IPL
HKLM,%szProductConfigRegistry%,"VfW Extension",0,%GUID_HyundaiISP%
HKLM,%szProductConfigRegistry%,"Downstream IID",0,%IID_IEPVfWExt%

;if last digit = '1', then RGB24 NOT available (to enable, set last digit to '0')
HKR,,DisableRGBSupport,3,0

;if last digit = '1' then I420 support is NOT available (to enable, set last digit to '0')
HKR,,DisableI420Support,3,0

;the last digit overrides the driver's default format according to following table:
; RGB24 = 0
; I420  = 1
; ABYR  = 6
; JBYR  = 16
; AJPG  = 17
; LBYR  = 18
;HKR,,DefaultFormat,3,17

;these allow the default width/height to be configured (MUST be a supported resolution)
;HKR,,DefaultWidth,3,0x40,0x01,0,0
;HKR,,DefaultHeight,3,0xf0,0,0,0

;if last digit is '1', zoom is not available and smaller resolutions are not cropped
;HKR,,DisableZoom,1,1

;if last digit is '1', these disable corresponding function (only valid if zoom IS AVAILABLE)
HKR,,DisablePan,1,0
HKR,,DisableTilt,1,0

;last number overrides driver's default quality level (1..5)
;HKR,,DefaultQuality,1,4

[SCDELUXE.AddReg.Basic]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,se402vc.sys
HKR,,PageOutWhenUnopened,3,01
; HKR,,PowerDownWhenUnopened,3,01
HKR,,UseBulkMode,1,01
HKR,,DontSuspendIfStreamsAreRunning,3,01
HKR,,PropertySetsID,3,3

; IEPCameraInformation
; This IID is aggregated for the filter given the CLSID of the property set
HKLM,System\CurrentControlSet\Control\MediaInterfaces\{0590D4C0-B6D6-11d2-9D67-00A0CC242499},,,%PlugIn_IEPCameraInformation%
HKLM,System\CurrentControlSet\Control\MediaInterfaces\{0590D4C0-B6D6-11d2-9D67-00A0CC242499},IID,1,0xc0,0xd4,0x90,0x05, 0xd6,0xb6, 0xd2,0x11, 0x9d,0x67,0x00,0xa0,0xcc,0x24,0x24,0x99

[SCDELUXE.UpdateIni]
system.ini,drivers32,,"VIDC.UV12=SCGroove.ax"

[SCDELUXE.DelDrivers]
ks.sys,,,1
stream.sys,,,1

[SCDELUXE.CopySystemDrivers]
se402vc.sys
ep_camd.sys

[SCDELUXE.CopyCODEC]
SCGroove.ax

[SCDELUXE.Interfaces]
AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,SCDELUXE.Interface

[SCDELUXE.NT.Interfaces]
AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,SCDELUXE.Interface.NT

[SCDELUXE.Interface]
AddReg=SCDELUXE.Intf.AddReg.Basic
AddReg=SCDELUXE.Intf.AddReg

[SCDELUXE.Interface.NT]
AddReg=SCDELUXE.Intf.AddReg.Basic
AddReg=SCDELUXE.Intf.AddReg.NT

[SCDELUXE.Intf.AddReg.Basic]
HKR,,CLSID,,%ProxyVCap.CLSID%
HKR,,FriendlyName,,%szProductDeviceDesc%
HKR,,ExtensionDLL,,%EP.ExtensionDLL%
; this overrides the standard camera control property page with Endpoints' page
HKR,PageAliases,"{71F96465-78F3-11d0-A18C-00A0C9118956}", 1, 0xb3, 0x83, 0x97, 0x17, 0xa7, 0x60, 0xd9, 0x4c, 0xb8, 0x63, 0xfb, 0x93, 0x2a, 0x73, 0x89, 0xee
HKR,PageAliases,"{71F96464-78F3-11d0-A18C-00A0C9118956}", 1, 0x2e, 0x38, 0x50, 0x0b, 0x65, 0xea, 0x55, 0x4a, 0xb6, 0x31, 0x32, 0x78, 0x09, 0xca, 0x69, 0x28

; IAMVideoCompression - Install this as a static interface on our video capture pin
HKR,PinFactory\0\Interfaces\{C6E13343-30AC-11d0-A18C-00A0C9118956},,,{C6E13343-30AC-11d0-A18C-00A0C9118956}

[SCDELUXE.Intf.AddReg]
HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_EP_Directx_Codec",,"regsvr32.exe /s %11%\SCGroove.ax"

[SCDELUXE.Intf.AddReg.NT]
HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_EP_Directx_Codec",,"rundll32.exe %11%\SCGroove.ax,DllRegisterServer"

[SCDELUXE.NT.Services]
AddService = SCDELUXEV,0x00000002,SCDELUXE.ServiceInstall

[SCDELUXE.ServiceInstall]
DisplayName   = %szProductDeviceDesc%
ServiceType   = %SERVICE_KERNEL_DRIVER%
StartType     = %SERVICE_DEMAND_START%
ErrorControl  = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\se402vc.sys

[Strings]

;----------------
; Non-Localizable
;----------------

; note: only registry value is case sensitive, key is not.
ProxyVCap.CLSID    = "{17CCA71B-ECD7-11D0-B908-00A0C9223196}"
KSCATEGORY_CAPTURE = "{65E8773D-8F56-11D0-A3B9-00A0C9223196}"

SERVICE_KERNEL_DRIVER = 1
SERVICE_DEMAND_START  = 3  ; PnP should use demand start
SERVICE_ERROR_NORMAL  = 1

EP.ExtensionDLL = "SCGroove.ax"

; this is the Hyundai ISP COM Server GUID
GUID_HyundaiISP="{90334840-CC22-11d2-9D67-00A0CC242499}"

; this is the interface ID for IEPVfWExt
IID_IEPVfWExt="{A33E54E0-1504-11d3-9D6A-00104B6DC9C2}"

;----------------
; Localizable
;----------------

Provider     = "NuCam Corp."
Manufacturer = "NuCam Corp."

;-------------------------------------------------------------
;NOTE: if the device description changes, it may require a change
;to the f/w updater INI file as well
szProductDeviceDesc = "SiPix StyleCam Groove (video)"
;-------------------------------------------------------------
PlugIn_IEPCameraInformation="IEPCameraInformation Interface Handler"

szProductConfigRegistry = "Software\Endpoints\Video IPL\1.0\Cameras\0x0C771012"

DiskDescription="SiPix StyleCam Groove Drivers Disk"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 3.42