;; SCD2V.inf - INF file for Video Interface
;;
;; Copyright (c) 2002, NuCam Corp.
;
[Version]
signature = "$CHICAGO$"
Class = Image
ClassGUID = {6bdd1fc6-810f-11d0-bec7-08002be2092f}
Provider = %Provider%
;CatalogFile = SCD2.cat
DriverVer = 12/06/2002,1
LayoutFile=Layout.inf, Layout1.inf, Layout2.inf
[ControlFlags]
; All PnP devices should be excluded from manual AddDevice Applet list
ExcludeFromSelect=*
[Manufacturer]
%Manufacturer%=Models
[DestinationDirs]
DefaultDestDir=10,system
; Delete old Win95 and "Detroit" update drivers
SCDELUXE.DelDrivers=10,system
SCDELUXE.CopySystemDrivers=10,system32\drivers
SCDELUXE.CopyCODEC=11
[SourceDisksNames]
1=%DiskDescription%,SCD2V.inf,,
[SourceDisksNames.x86]
1=%DiskDescription%,SCD2V.inf,,
[SourceDisksFiles]
se402vc.sys = 1
ep_camd.sys = 1
SCGroove.ax = 1
[Models]
%szProductDeviceDesc%=SCDELUXE,USB\VID_0C77&PID_1012&MI_00
[SCDELUXE]
DriverVer= 12/06/2002,1
Include= ks.inf, kscaptur.inf, ksfilter.inf
Needs= KS.Registration,KSCAPTUR.Registration,MSPCLOCK.Installation
AddReg= SCDELUXE.AddReg, SCDELUXE.AddReg.Basic
UpdateInis= SCDELUXE.UpdateIni
;DelFiles= SCDELUXE.DelDrivers
;CopyFiles= SCDELUXE.CopySystemDrivers, SCDELUXE.CopyCODEC
[SCDELUXE.NT]
Include= ks.inf, kscaptur.inf
Needs= KS.Registration,KSCAPTUR.Registration.NT
AddReg= SCDELUXE.AddReg, SCDELUXE.AddReg.Basic
UpdateInis= SCDELUXE.UpdateIni
DelFiles= SCDELUXE.DelDrivers
CopyFiles= SCDELUXE.CopySystemDrivers, SCDELUXE.CopyCODEC
[SCDELUXE.AddReg]
HKR,,WdmDeviceDesc,,%szProductDeviceDesc%
; this allows TWAIN Driver to support this device
HKLM,"Software\Endpoints\TWAIN Data Source\1.0\Cameras\0x0C771012"
; VfW Extension data for IPL
HKLM,%szProductConfigRegistry%,"VfW Extension",0,%GUID_HyundaiISP%
HKLM,%szProductConfigRegistry%,"Downstream IID",0,%IID_IEPVfWExt%
;if last digit = '1', then RGB24 NOT available (to enable, set last digit to '0')
HKR,,DisableRGBSupport,3,0
;if last digit = '1' then I420 support is NOT available (to enable, set last digit to '0')
HKR,,DisableI420Support,3,0
;the last digit overrides the driver's default format according to following table:
; RGB24 = 0
; I420 = 1
; ABYR = 6
; JBYR = 16
; AJPG = 17
; LBYR = 18
;HKR,,DefaultFormat,3,17
;these allow the default width/height to be configured (MUST be a supported resolution)
;HKR,,DefaultWidth,3,0x40,0x01,0,0
;HKR,,DefaultHeight,3,0xf0,0,0,0
;if last digit is '1', zoom is not available and smaller resolutions are not cropped
;HKR,,DisableZoom,1,1
;if last digit is '1', these disable corresponding function (only valid if zoom IS AVAILABLE)
;HKR,,DisablePan,1,0
;HKR,,DisableTilt,1,0
;last number overrides driver's default quality level (1..5)
;HKR,,DefaultQuality,1,4
[SCDELUXE.AddReg.Basic]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,se402vc.sys
HKR,,PageOutWhenUnopened,3,01
; HKR,,PowerDownWhenUnopened,3,01
HKR,,UseBulkMode,1,01
HKR,,DontSuspendIfStreamsAreRunning,3,01
HKR,,PropertySetsID,3,3
; IEPCameraInformation
; This IID is aggregated for the filter given the CLSID of the property set
HKLM,System\CurrentControlSet\Control\MediaInterfaces\{0590D4C0-B6D6-11d2-9D67-00A0CC242499},,,%PlugIn_IEPCameraInformation%
HKLM,System\CurrentControlSet\Control\MediaInterfaces\{0590D4C0-B6D6-11d2-9D67-00A0CC242499},IID,1,0xc0,0xd4,0x90,0x05, 0xd6,0xb6, 0xd2,0x11, 0x9d,0x67,0x00,0xa0,0xcc,0x24,0x24,0x99
[SCDELUXE.UpdateIni]
system.ini,drivers32,,"VIDC.UV12=SCGroove.ax"
[SCDELUXE.DelDrivers]
ks.sys,,,1
stream.sys,,,1
[SCDELUXE.CopySystemDrivers]
;se402vc.sys
;ep_camd.sys
[SCDELUXE.CopyCODEC]
;SCGroove.ax
[SCDELUXE.Interfaces]
AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,SCDELUXE.Interface
[SCDELUXE.NT.Interfaces]
AddInterface=%KSCATEGORY_CAPTURE%,GLOBAL,SCDELUXE.Interface.NT
[SCDELUXE.Interface]
AddReg=SCDELUXE.Intf.AddReg.Basic
AddReg=SCDELUXE.Intf.AddReg
[SCDELUXE.Interface.NT]
AddReg=SCDELUXE.Intf.AddReg.Basic
AddReg=SCDELUXE.Intf.AddReg.NT
[SCDELUXE.Intf.AddReg.Basic]
HKR,,CLSID,,%ProxyVCap.CLSID%
HKR,,FriendlyName,,%szProductDeviceDesc%
HKR,,ExtensionDLL,,%EP.ExtensionDLL%
; this overrides the standard camera control property page with Endpoints' page
HKR,PageAliases,"{71F96465-78F3-11d0-A18C-00A0C9118956}", 1, 0xb3, 0x83, 0x97, 0x17, 0xa7, 0x60, 0xd9, 0x4c, 0xb8, 0x63, 0xfb, 0x93, 0x2a, 0x73, 0x89, 0xee
HKR,PageAliases,"{71F96464-78F3-11d0-A18C-00A0C9118956}", 1, 0x2e, 0x38, 0x50, 0x0b, 0x65, 0xea, 0x55, 0x4a, 0xb6, 0x31, 0x32, 0x78, 0x09, 0xca, 0x69, 0x28
; IAMVideoCompression - Install this as a static interface on our video capture pin
HKR,PinFactory\0\Interfaces\{C6E13343-30AC-11d0-A18C-00A0C9118956},,,{C6E13343-30AC-11d0-A18C-00A0C9118956}
[SCDELUXE.Intf.AddReg]
HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_EP_Directx_Codec",,"regsvr32.exe /s %11%\SCGroove.ax"
[SCDELUXE.Intf.AddReg.NT]
HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_EP_Directx_Codec",,"rundll32.exe %11%\SCGroove.ax,DllRegisterServer"
[SCDELUXE.NT.Services]
AddService = SCDELUXEV,0x00000002,SCDELUXE.ServiceInstall
[SCDELUXE.ServiceInstall]
DisplayName = %szProductDeviceDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_DEMAND_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\se402vc.sys
[Strings]
;----------------
; Non-Localizable
;----------------
; note: only registry value is case sensitive, key is not.
ProxyVCap.CLSID = "{17CCA71B-ECD7-11D0-B908-00A0C9223196}"
KSCATEGORY_CAPTURE = "{65E8773D-8F56-11D0-A3B9-00A0C9223196}"
SERVICE_KERNEL_DRIVER = 1
SERVICE_DEMAND_START = 3 ; PnP should use demand start
SERVICE_ERROR_NORMAL = 1
EP.ExtensionDLL = "SCGroove.ax"
; this is the Hyundai ISP COM Server GUID
GUID_HyundaiISP="{90334840-CC22-11d2-9D67-00A0CC242499}"
; this is the interface ID for IEPVfWExt
IID_IEPVfWExt="{A33E54E0-1504-11d3-9D6A-00104B6DC9C2}"
;----------------
; Localizable
;----------------
Provider = "NuCam Corp."
Manufacturer = "NuCam Corp."
;-------------------------------------------------------------
;NOTE: if the device description changes, it may require a change
;to the f/w updater INI file as well
szProductDeviceDesc = "SiPix StyleCam Groove (video)"
;-------------------------------------------------------------
PlugIn_IEPCameraInformation="IEPCameraInformation Interface Handler"
szProductConfigRegistry = "Software\Endpoints\Video IPL\1.0\Cameras\0x0C771012"
DiskDescription="SiPix StyleCam Groove Drivers Disk"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.