slabw2k.inf Driver File Contents (CD-287901-007.zip)

;*****************************************************************************
;
; Name:  slabw2k.inf
;
; Function:
;	Install the CP210x USB to UART Bridge Controller (WDM) on Win2000
;
; Copyright (c) 1997-2004 MCCI
;
; MCCI is a registered trademark of Moore Computer Consultants, Inc
;
; NOTICE: This software is licensed, not sold.  Any modification of this
; inf file to change the reference to an operating system or to change the
; reference to a device is not permitted unless authorized in writing by
; Moore Computer Consultants, Inc.
;
;*****************************************************************************

[Version]
signature="$WINDOWS NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%Provider%
DriverVer=12/16/2004, 4.28.0.2700
;CatalogFile=slabser.cat

[ControlFlags]
ExcludeFromSelect = *

[SourceDisksNames]
; diskid = description[, [tagfile] [, <unused>, subdir]]
1=%DiskString%,"slabser.sys",,

[SourceDisksFiles]
; filename = diskid[,[ subdir][, size]]
slabser.sys = 1
slabcmnt.sys = 1

;-----------------------------------------------------------------------------
; Specify target paths...
;-----------------------------------------------------------------------------

[DestinationDirs]
DefaultDestDir = 12                    ; system32\drivers
CopyFiles = 12                         ; system32\drivers
CopyFiles.Win2K = 12                   ;

;-----------------------------------------------------------------------------
; Table of Contents
;-----------------------------------------------------------------------------
[Manufacturer]
%SLAB%=SLAB

;-----------------------------------------------------------------------------
; Device-by-device entries
;-----------------------------------------------------------------------------
[SLAB]
%SLAB.Comm.Desc% = SLAB.Install, USB\VID_10C4&PID_EA60&MI_00&OS_NT

;-----------------------------------------------------------------------------
; Installation instructions
;-----------------------------------------------------------------------------

[SLAB.Install.nt]
AddReg		= SLAB.AddReg,SLAB.NT.AddReg
CopyFiles	= CopyFiles, CopyFiles.Win2K

;-----------------------------------------------------------------------------
;  Registry
;-----------------------------------------------------------------------------

; common registry entries 
[SLAB.AddReg]
HKR,,NTMPDriver,,slabser.sys
HKR,,RateLimitPurgeMS, 0x10001, 0x64, 0x00, 0x00, 0x00
HKR,,OverrideDefaultPortSettings, 0x10001, 01,00,00,00
HKR,,InitialBaudRate, 0x10001, 00,C2,01,00                      ;115200 initial baud rate
HKR,,InitialLineControl,, "8N1"                                 ;8-bits, No parity, 1 stop bit

; only for NT...
[SLAB.NT.AddReg]
HKR,,PortSubClass,1,01
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

;-----------------------------------------------------------------------------
;  Copy lists
;-----------------------------------------------------------------------------
[CopyFiles]

[CopyFiles.Win2K]
slabser.sys
slabcm.sys,slabcmnt.sys
slabcmnt.sys


;-----------------------------------------------------------------------------
;  NT Services installation
;-----------------------------------------------------------------------------

[SLAB.Install.NT.Services]
AddService = slabser, 0x00000002, SLAB.Install.AddService


[SLAB.Install.AddService]
DisplayName	= %SLAB.Service.Name%
Description	= %SLAB.Service.Desc%
ServiceType	= 1			;%SERVICE_KERNEL_DRIVER%
StartType	= 3			;%SERVICE_DEMAND_START%
ErrorControl	= 1			;%SERVICE_ERROR_NORMAL%	
ServiceBinary	= %12%\slabser.sys



;-----------------------------------------------------------------------------
; STRINGS
;-----------------------------------------------------------------------------
[Strings]

;<<localize the following>>

;BEGIN ENG - US English Strings

Provider = "Silicon Laboratories"
SLAB = "Silicon Laboratories"
DiskString = "IC-PCR1500/2500"

SLAB.Comm.Desc = "CP210x USB to UART Bridge Controller"
SLAB.Service.Name = "CP210x USB to UART Bridge Controller Drivers"
SLAB.Service.Desc = "CP210x USB to UART Bridge Controller Drivers"


CustomerDataPath = "CP210x USB to UART Bridge Controller"
DriverSet = "CP210x USB to UART Bridge Controller Driver Set"


;END ENG - US English Strings

;-----------------------------------------------------------------------------
; The following are symbolic constants which don't change per locale.
;-----------------------------------------------------------------------------


;*** end of file ***
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.29