slabvxd.inf Driver File Contents (CD-287901-007.zip)

;*****************************************************************************
;
; Name:  slabvxd.inf 
;
; Function:
;	Install the CP210x USB to UART Bridge Controller (VCOMM)
;
; Copyright (c) 1997-2004 MCCI
;
; MCCI is a registered trademark of Moore Computer Consultants, Inc
;
; NOTICE: This software is licensed, not sold.  Any modification of this
; inf file to change the reference to an operating system or to change the
; reference to a device is not permitted unless authorized in writing by
; Moore Computer Consultants, Inc..
;
;*****************************************************************************

[Version]
signature="$CHICAGO$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%Provider%
DriverVer=12/16/2004, 4.28.0.2700
;CatalogFile=slabser.cat

;-----------------------------------------------------------------------------
; No files are copied by this file.. no filecopy init declarations are here.
;-----------------------------------------------------------------------------

;-----------------------------------------------------------------------------
; Table of Contents
;-----------------------------------------------------------------------------
[Manufacturer]
%SLAB%=SLAB

;-----------------------------------------------------------------------------
; Device-by-device entries
;-----------------------------------------------------------------------------
[SLAB]
%PortDesc% = SLAB.Install, SLABCR\{E4768D57-352E-4495-880C-056A7CB34611}

;-----------------------------------------------------------------------------
; The exclude-from-select stuff
;-----------------------------------------------------------------------------
[ControlFlags]
ExcludeFromSelect = *

;-----------------------------------------------------------------------------
; Installation instructions
;-----------------------------------------------------------------------------
[SLAB.Install]
AddReg		= SLAB.W95AddReg,SLAB.W95Overrides

[SLAB.Install.Nt]

;-----------------------------------------------------------------------------
;  Registry
;-----------------------------------------------------------------------------
;**** here's the stuff for W95 ports.
;**** it's in this INF file, but we'll not use it until we get enumerated.
[SLAB.W95AddReg]
HKR,,DevLoader,,*vcomm
HKR,,PortDriver,,slabcomm.vxd
HKR,,Contention,,slabvcd.vxd
HKR,,DCB,3,1C,00,00,00, 00,C2,01,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
HKR,,PortSubClass,1,01
HKR,,ConfigDialog,,serialui.dll
HKR,,EnumPropPages,,"serialui.dll,EnumPropPages"

;-----------------------------------------------------------------------------
;  Logical Configurations
;-----------------------------------------------------------------------------
[SLAB.W95Overrides]
;-- Config for 3f8 - COM1,IRQ4
HKR,Override,0000,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \  ; total length of io resource descriptor
02,00,00,00, \  ; ResType_IO = 0x00000002
01,00,0C,00, \  ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \  ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \  ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \  ; IOR_Align / IOR_nPorts
F8,03,FF,03, \  ; IOR_Min / IOR_Max
00,00,00,00, \  ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** IRQ ***
10,00,00,00, \  ; total length of irq resource descriptor
04,00,00,00, \  ; ResType_IRQ - 0x00000004
01,00,00,00, \  ; IRQD_Flags / IRQD_Alloc_Num
10,00,00,00, \  ; IRQD_Req_Mask / IRQD_Reserved
;*** TERMINATOR ***
00,00,00,00
;
;--- Config for 2f8 0 COM2 IRQ3
HKR,Override,0001,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \  ; total length of io resource descriptor
02,00,00,00, \  ; ResType_IO = 0x00000002
01,00,0C,00, \  ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \  ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \  ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \  ; IOR_Align / IOR_nPorts
F8,02,FF,02, \  ; IOR_Min / IOR_Max
00,00,00,00, \  ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** IRQ ***
10,00,00,00, \  ; total length of irq resource descriptor
04,00,00,00, \  ; ResType_IRQ - 0x00000004
01,00,00,00, \  ; IRQD_Flags / IRQD_Alloc_Num
08,00,00,00, \  ; IRQD_Req_Mask / IRQD_Reserved
;*** TERMINATOR ***
00,00,00,00
;
;--- Config for 3e8 0 COM3 IRQ4
HKR,Override,0002,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \  ; total length of io resource descriptor
02,00,00,00, \  ; ResType_IO = 0x00000002
01,00,0C,00, \  ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \  ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \  ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \  ; IOR_Align / IOR_nPorts
E8,03,EF,03, \  ; IOR_Min / IOR_Max
00,00,00,00, \  ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** IRQ ***
10,00,00,00, \  ; total length of irq resource descriptor
04,00,00,00, \  ; ResType_IRQ - 0x00000004
01,00,00,00, \  ; IRQD_Flags / IRQD_Alloc_Num
10,00,00,00, \  ; IRQD_Req_Mask / IRQD_Reserved
;*** TERMINATOR ***
00,00,00,00
;
;--- Config for 2e8 0 COM4 IRQ3
HKR,Override,0003,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \  ; total length of io resource descriptor
02,00,00,00, \  ; ResType_IO = 0x00000002
01,00,0C,00, \  ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \  ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \  ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \  ; IOR_Align / IOR_nPorts
E8,02,EF,02, \  ; IOR_Min / IOR_Max
00,00,00,00, \  ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** IRQ ***
10,00,00,00, \  ; total length of irq resource descriptor
04,00,00,00, \  ; ResType_IRQ - 0x00000004
01,00,00,00, \  ; IRQD_Flags / IRQD_Alloc_Num
08,00,00,00, \  ; IRQD_Req_Mask / IRQD_Reserved
;*** TERMINATOR ***
00,00,00,00
;
;-- Config for 3f8 - COM1 IRQAny
HKR,Override,0004,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \  ; total length of io resource descriptor
02,00,00,00, \  ; ResType_IO = 0x00000002
01,00,0C,00, \  ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \  ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \  ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \  ; IOR_Align / IOR_nPorts
F8,03,FF,03, \  ; IOR_Min / IOR_Max
00,00,00,00, \  ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** IRQ ***
10,00,00,00, \  ; total length of irq resource descriptor
04,00,00,00, \  ; ResType_IRQ - 0x00000004
01,00,00,00, \  ; IRQD_Flags / IRQD_Alloc_Num
FF,FF,00,00, \  ; IRQD_Req_Mask / IRQD_Reserved
;*** TERMINATOR ***
00,00,00,00
;
;--- Config for 2f8 0 COM2 IRQAny
HKR,Override,0005,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \  ; total length of io resource descriptor
02,00,00,00, \  ; ResType_IO = 0x00000002
01,00,0C,00, \  ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \  ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \  ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \  ; IOR_Align / IOR_nPorts
F8,02,FF,02, \  ; IOR_Min / IOR_Max
00,00,00,00, \  ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** IRQ ***
10,00,00,00, \  ; total length of irq resource descriptor
04,00,00,00, \  ; ResType_IRQ - 0x00000004
01,00,00,00, \  ; IRQD_Flags / IRQD_Alloc_Num
FF,FF,00,00, \  ; IRQD_Req_Mask / IRQD_Reserved
;*** TERMINATOR ***
00,00,00,00
;
;--- Config for 3e8 0 COM3 IRQAny
HKR,Override,0006,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \  ; total length of io resource descriptor
02,00,00,00, \  ; ResType_IO = 0x00000002
01,00,0C,00, \  ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \  ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \  ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \  ; IOR_Align / IOR_nPorts
E8,03,EF,03, \  ; IOR_Min / IOR_Max
00,00,00,00, \  ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** IRQ ***
10,00,00,00, \  ; total length of irq resource descriptor
04,00,00,00, \  ; ResType_IRQ - 0x00000004
01,00,00,00, \  ; IRQD_Flags / IRQD_Alloc_Num
FF,FF,00,00, \  ; IRQD_Req_Mask / IRQD_Reserved
;*** TERMINATOR ***
00,00,00,00
;
;--- Config for 2e8 0 COM4 IRQAny
HKR,Override,0007,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \  ; total length of io resource descriptor
02,00,00,00, \  ; ResType_IO = 0x00000002
01,00,0C,00, \  ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \  ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \  ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \  ; IOR_Align / IOR_nPorts
E8,02,EF,02, \  ; IOR_Min / IOR_Max
00,00,00,00, \  ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** IRQ ***
10,00,00,00, \  ; total length of irq resource descriptor
04,00,00,00, \  ; ResType_IRQ - 0x00000004
01,00,00,00, \  ; IRQD_Flags / IRQD_Alloc_Num
FF,FF,00,00, \  ; IRQD_Req_Mask / IRQD_Reserved
;*** TERMINATOR ***
00,00,00,00
;
;--- Config for anywhere- COMx IRQ Any
HKR,Override,0008,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \  ; total length of io resource descriptor
02,00,00,00, \  ; ResType_IO = 0x00000002
01,00,0C,00, \  ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \  ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \  ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \  ; IOR_Align / IOR_nPorts
00,01,FF,03, \  ; IOR_Min / IOR_Max
00,00,00,00, \  ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** IRQ ***
10,00,00,00, \  ; total length of irq resource descriptor
04,00,00,00, \  ; ResType_IRQ - 0x00000004
01,00,00,00, \  ; IRQD_Flags / IRQD_Alloc_Num
FF,FF,00,00, \  ; IRQD_Req_Mask / IRQD_Reserved
;*** TERMINATOR ***
00,00,00,00
;
;--- Config for anywhere- COMx IRQ None
HKR,Override,0009,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \  ; total length of io resource descriptor
02,00,00,00, \  ; ResType_IO = 0x00000002
01,00,0C,00, \  ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \  ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \  ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \  ; IOR_Align / IOR_nPorts
00,01,FF,03, \  ; IOR_Min / IOR_Max
00,00,00,00, \  ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** TERMINATOR ***
00,00,00,00


;-----------------------------------------------------------------------------
; STRINGS
;-----------------------------------------------------------------------------
[Strings]

;BEGIN ENG - US English Strings
Provider = "Silicon Laboratories"
SLAB = "Silicon Laboratories"

PortDesc = "CP210x USB to UART Bridge Controller"

CustomerDataPath = "CP210x USB to UART Bridge Controller"
DriverSet = "CP210x USB to UART Bridge Controller Software"

;END ENG - US English Strings

;--- strings following this line should not be localized ---

;*** end of file ***
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.47