;*****************************************************************************
;
; Name: z800mdmw.inf
;
; Function:
; Install the Sony Ericsson Z800 USB WMC Modem Port Drivers on Win9x/Me
;
; Copyright (c) 1997-2005 MCCI
;
; MCCI is a registered trademark of Moore Computer Consultants, Inc
;
; NOTICE: This software is licensed, not sold. Any modification of this
; inf file to change the reference to an operating system or to change the
; reference to a device is not permitted unless authorized in writing by
; Moore Computer Consultants, Inc..
;
;*****************************************************************************
[Version]
signature="$CHICAGO$"
Class=USB
ClassGuid={36FC9E60-c465-11cf-8056-444553540000}
Provider=%Provider%
DriverVer=02/09/2005, 4.28.0.2703
CatalogFile=z800mdm.cat
[ControlFlags]
ExcludeFromSelect = *
;-----------------------------------------------------------------------------
; Change A:\ to source drive (or omit to always (?) be prompted)
;-----------------------------------------------------------------------------
[SourceDisksNames]
; diskid = description[, [tagfile] [, <unused>, subdir]]
; having the tagfile non-null seems to help...
1=%DiskString%,"z800mdm.sys",,
[SourceDisksFiles]
; filename = diskid[,[ subdir][, size]]
z800mdm.sys = 1
z800cr.sys = 1
z800vcr.vxd = 1
z800cm95.sys = 1
z800cmnt.sys = 1
z800comm.vxd = 1
z800vcd.vxd = 1
;-----------------------------------------------------------------------------
; Specify target paths...
;-----------------------------------------------------------------------------
[DestinationDirs]
DefaultDestDir = 11 ; LDID_SYS
;-----------------------------------------------------------------------------
; Table of Contents
;-----------------------------------------------------------------------------
[Manufacturer]
%Sony Ericsson%=SEMC
;-----------------------------------------------------------------------------
; Device-by-device entries
;-----------------------------------------------------------------------------
[SEMC]
%SEMC.Modem.Desc% = SEMC.Install, USB\VID_0FCE&PID_D018&MI_01&OS_9X
%SEMC.Modem.Desc2% = SEMC.Install2, USB\VID_0FCE&PID_D018&MI_03&OS_9X
;-----------------------------------------------------------------------------
; Installation instructions
;-----------------------------------------------------------------------------
[SEMC.Install]
AddReg = SEMC.AddReg,SEMC.W95.AddReg,SEMC.W95.AddReg.CRGuid
CopyFiles = CopyFiles, CopyFiles.W95, CopyFiles.sys, CopyFiles.W95.sys
DriverVer=02/09/2005, 4.28.0.2703
;-----------------------------------------------------------------------------
; Registry
;-----------------------------------------------------------------------------
; common registry entries
[SEMC.AddReg]
HKR,,NTMPDriver,,z800mdm.sys
HKR,,CRUpperDescription,,%UpperDescription%
HKR,,OverrideDefaultPortSettings, 0x10001, 01,00,00,00
HKR,,InitialBaudRate, 0x10001, 00,C2,01,00 ;115200 initial baud rate
HKR,,InitialLineControl,, "8N1" ;8-bits, No parity, 1 stop bit
HKR,,EnableSetClearFeatureIdle, 0x10001, 01,00,00,00
; only for Win95....
[SEMC.W95.AddReg]
HKR,,DevLoader,,*ntkern
[SEMC.W95.Addreg.CRGuid]
HKR,,CRGuid,,{E66DED20-9D12-4ae8-A166-07B7A7AAF516}
;-----------------------------------------------------------------------------
; Copy lists
;-----------------------------------------------------------------------------
[CopyFiles]
[CopyFiles.W95]
z800vcr.vxd
z800comm.vxd
z800vcd.vxd
[CopyFiles.sys]
z800mdm.sys
z800cr.sys
[CopyFiles.W95.sys]
z800cm.sys,z800cm95.sys
z800cm95.sys
z800cmnt.sys
[Copyfiles.W95.inf]
[SEMC.Install2]
AddReg = SEMC.AddReg,SEMC.W95.AddReg,SEMC.W95.AddReg.CRGuid2
CopyFiles = CopyFiles, CopyFiles.W95, CopyFiles.sys, CopyFiles.W95.sys
DriverVer=02/09/2005, 4.28.0.2703
[SEMC.W95.Addreg.CRGuid2]
HKR,,CRGuid,,{D84146B7-23FE-40cb-9602-C00F99422F43}
;-----------------------------------------------------------------------------
; STRINGS
;-----------------------------------------------------------------------------
[Strings]
;BEGIN ENG - US English Strings
Provider = "Sony Ericsson"
Sony Ericsson = "Sony Ericsson"
DiskString = "Sony Ericsson Z800 USB WMC Modem installation disk"
SEMC.Modem.Desc = "Sony Ericsson Z800 USB WMC Data Modem (WDM)"
UpperDescription = "Sony Ericsson Z800 USB WMC Modem Drivers"
CustomerDataPath = "Sony Ericsson Z800"
DriverSet = "Sony Ericsson Z800 Software"
UninstallFile = "Z800Uninstall.exe"
McciOptions = "Uninstallable"
SEMC.Modem.Desc2 = "Sony Ericsson Z800 USB WMC Modem"
;END ENG - US English Strings
;-----------------------------------------------------------------------------
; The following are symbolic constants which don't change per locale.
;-----------------------------------------------------------------------------
;*** end of file ***
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.