1. CC35-WCP55UtilitiesInstallWin98And2k03_00_0012.exe Driver
2. F5911_Readme.txt File Contents

F5911_Readme.txt Driver File Contents (CC35-WCP55UtilitiesInstallWin98And2k03_00_0012.exe)

Xerox CopyCentre, WorkCentre, WorkCentre Pro 35-45-55 Utilities 
version 03.00.0012
Copyright (C) 2005 Xerox Ltd.
All Rights Reserved


Table of Contents:
==============

1. Description
2. Features
3. System Requirements
4. Distribution
5. Installation
6. Further Help


1. Description
==============

The Xerox CopyCentre, WorkCentre, WorkCentre Pro 35-45-55 Utilities
consists of a suite of tools for performing administrative tasks on the 
Xerox CopyCentre C35/C45/C55, WorkCentre M35/M45/M55, and 
WorkCentre Pro 35/Pro 45/Pro 55 family of products.  

All the tools connect to the device using a Universal Serial Bus (USB) connection.


2. Features
===========

Software Upgrade - A tool for upgrading the software on the device

Auditron Data Save/Restore - A tool for backing up Auditron data and 
accounts, and generating reports from Auditron data held within the device.


3. System Requirements
======================

The following minimum configuration is required:

- An IBM Compatible PC running Windows 98, Me, 2000, or XP
- A Type A USB port
- A USB A-B cable for connecting PC to device
- A CD-ROM drive or internet connection
- Internet Explorer v4.01 or later

Following installation see the individual help files for additional tool 
specific requirements.


4. Distribution 
===============

This product contains the following key files:

Readme.txt     - Introductory information (this file)
Setup.exe      - Xerox CopyCentre, WorkCentre, WorkCentre Pro 35-45-55 Utilities 
                 setup application
SIPUSBDr.sys   - USB Driver
SIPUSBDr.inf   - USB Driver inf file


5. Installation
===============


5.1 Upgrading from a previous version
-------------------------------------

Remove the Xerox CopyCentre, WorkCentre, WorkCentre Pro 35-45-55 Utilities

This can be achieved using the Add/Remove program applet within the Windows 
Control Panel.  The application Xerox CopyCentre, WorkCentre, 
WorkCentre Pro 35-45-55 Utilities should be removed.  For Assistance, see 
Windows Help.

Run Xerox CopyCentre, WorkCentre, WorkCentre Pro 35-45-55 Utilities setup

Select Run from the Taskbar Start menu, type the full name of the setup file 
(for example, C:\download\setup.exe), and press the Enter key.  This will start
the setup application.  Follow the prompts and online help to install.

Update the USB Driver

Power up the device, connect the USB cable between the PC and device.  
Open Start->Settings->Control Panel->System->Hardware->Device Manager, 
locate the USB section, right click on the 'Xerox CopyCentre, WorkCentre, 
WorkCentre Pro 35-45-55 Service Port' driver and select Properties.  
Select the Driver tab and click Update Driver.  Using the Update Wizard, 
select the new driver file.  The Driver should now be updated (unless the 
current version of the driver is the latest available in which case no update 
shall occur).  Power down the device.  

NOTE - the USB Driver update procedure varies slightly depending on the OS.  
For help updating the USB Driver, see Windows help.


5.2 New Installation
--------------------

Run Xerox CopyCentre, WorkCentre, WorkCentre Pro 35-45-55 Utilities setup

Select Run from the Taskbar Start menu, type the full name of the setup file 
(for example, C:\download\setup.exe), and press the Enter key.  This will start
the setup application.  Follow the prompts and online help to install.

Install the USB Driver

Power up the device, connect the USB cable between the PC and device.  
The USB connection on the device is located at the rear top half.  Windows will 
detect the presence of a new USB device and request a driver.  Browse to and 
select SIPUSBDr.inf.  The driver is now installed.


6. Further Help
===============

For help with using the tools, please see the tools corresponding help file.