README.TXT Driver File Contents (Pro16P_215XP.exe)

			Xerox WorkCentre Pro PCL Readme

Table of Contents
	1 - Introduction

	2 - Install/Uninstall Problems

	3 - Operation with other Printers Installed

	4 - Default Paper Size & Units of Measure

	5 - PCL 5e/6 Hints
	6 - Printing problems

	This document describes problems and situations encountered installing and using 
        the WorkCentre Pro PCL Printer Software.  This should help resolve problems or 
        any unusual situations.

Install/Uninstall Problems

	Uninstall Problem
		If the WorkCentre Pro PCL printer properties dialog is open and uninstall 
		is performed, the software will not be completely removed.  You will have 
		to install the WorkCentre Pro PCL software and then uninstall with the 
		dialog closed.

Default Paper Size & Units of Measure
	The default paper (Letter or A4) and image shift units of measure (Inch or MM) 
	is based upon the country code set for the Windows operating system.  The 
	country code can be set	from the Windows "Control Panel" / "Regional Settings".  

	For correct operation, the country code must be set before installing the 
	WorkCentre Pro PCL printer software.  If the country code changes after 
	installation, the printer software must be installed again.

	The following table describes the defaults for each language.

				Default		Default
	Country Code		Paper Size	Units of Measure
	============		==========	================
	English US		Letter		Inch
	English UK		A4		MM
	English Others	 	A4		MM
	English Canadian  	Letter		MM
	Danish			A4		MM
	French Canadian		Letter		MM
	French Others		A4		MM
	German - ALL		A4		MM
	Italian - ALL		A4		MM
	Norwegian - ALL		A4		MM
	Spanish - ALL		A4		MM
	Portuguese - ALL	A4		MM
	Swedish			A4		MM
	Other country codes	A4		MM

PCL 5e/6 Hints
	- Please use the latest version of application software for your
  	  Operation System as much as possible.

	- If Data loss error and other errors happen when printing, please add 
	  expansion memory to the printer.  In addtion, select "Page Protection"
	  in "Device Options" tab of printer properties dialog.

	- If you encounter printing problems with Windows PCL6 printer driver,
  	  please try to use Windows PCL5e printer driver to see if the problem 

Printing problems
	- When printing light colored lines and/or thin lines in your document
	  the lines may not be visible. Please change the color of the line to 
	  a darker color or make the line thicker and try printing again.

	- When using PCL 6 Watermarks, if the odd-numbered page original is printed 
	  duplex, the Watermark will be printed on the blank page of the last paper.

	- Printing in Adobe Acrobat Reader may result in compressed print.  In 
	  this case perform the following:
	  Open the printer properties:
		Select the Image Quality tab, set the Graphics mode to "Raster" 
		and set the Text Mode to "As Bitmaps".  In addition, select the 
		Device Options tab and set to use "Use Device Fonts" 

	- Print to file: To print to file, change the port to FILE: for the port 
	  assigned to the printer.  Do not select the application "Print to file" 

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.30