CLIENT.TXT Driver File Contents (EN1207D.zip)

*******************************************************************
*                  ACCTON TECHNOLOGY CORPORATION                  *
*            EN1207D SERIES PCI FAST ETHERNET ADAPTER             *
*                 NETWARE ODI DRIVER INSTALLATION                 *
*                                                                 *
*         Copyright (C) 1998 Accton Technology Corporation        *
*                       All Rights Reserved.                      *
*******************************************************************


Content of this document
========================
        A. DOS ODI WorkStation Driver Installation
        B. Installation Notes


A. NetWare DOS ODI Workstation Driver Installation
==================================================
This section describes the procedure to install
the NetWare workstation driver for your adapter.

Requirements:
-------------
      Accton EN1207D Series Driver Diskette  (ACCODI.COM)
      Driver Location: \NETWARE\DOSODI

Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the adapter is properly installed and configured. Make sure
that your NetWare operating system is properly installed.

1. Run the following command in the order given below and
   press <Enter>:

   lsl
   accodi
   ipxodi
   netx (or vlm)

2. You can now log onto your network.


B. Installation Notes
=====================

1. Edit the NET.CFG if you want to change some parameters.

   For example, if you're using a NetWare 3.11 workstation and
   want to log into a NetWare v4.X  server. The default
   frame type of NetWare 3.11 is Ethernet 802.3, while that of
   NetWare v4.X is Ethernet 802.2. Before you can log into
   NetWare v4.X , make sure there is a protocol binding
   for Ethernet 802.3 in the server's NET.CFG file.

   This is normally included in the [MLID] section. A sample
   NET.CFG file is given below:

   Link Driver ACCODI
        FRAME Ethernet_802.2
        FRAME Ethernet_802.3
        FRAME Ethernet_II
        FRAME Ethernet_SNAP
        PROTOCOL IPX 0    Ethernet_802.3
           .
           .
        MEDIUM  AUTO     ;operate on auto negotiation mode
     ;  MEDIUM  10HALF   ;operate on 10M/HalfDuplex mode
     ;  MEDIUM  10FULL   ;operate on 10M/Fullduplex mode
     ;  MEDIUM  100HALF  ;operate on 100M/HalfDuplex mode
     ;  MEDIUM  100FULL  ;operate on 100M/Fullduplex mode

---
All trademarks and brand names mentioned belong to their
respective owners.


-- THE END --

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.79