1. 3400_IP.exe Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (3400_IP.exe)

===================================================================
XEROX PHASER 3400
March 2001 
Copyright 2001 Xerox Corporation. All rights Reserved.
===================================================================

Thank you for choosing the Xerox Phaser 3400 printer. 

Please read this information before using the Xerox Phaser 3400 printer.
If user use this printer with TCP/IP protocol, IP address should be set in printer. 
This program is for setting IP address. It will help for user to easily set IP address.

This Readme file contains the following four sections:

     1) To prepare before using this program
     2) To Use this program
     3) Troubleshooting
     4) Copyright and Trademark Information

1) To prepare before using this program :
-----------------------------------------
   a) This program supports Windows OS. (95/98/ME/NT/2000) 
   b) In order to use this program, you have to install TCP/IP protocol in your PC.
   
2) To Use this program :
------------------------
   a) Turn on the Xerox Phaser 3400 printer.	
   b) Click this program. (Start -> Program -> XeroxSetIP -> SetIP) 
   c) Type 3400 printer's MAC address.
   d) Type IP address, Subnet Mask and Default Gateway.
   e) Click Update button. 
   f) If it successfully is completed, the Phaser 3400 printer prints NetWork Test Page.
      You can confirm IP address on NetWork Test Page.
   
3) Troubleshooting :
-------------------- 
   >>> It happened error message. 
   a) Please check Phaser 3400 printer's NIC. It must be ON (upper LED) and blinking (lower LED).
   b) Please turn off and on the printer. And then, please try from step 2-c) to step 2-e) again.
   c) If it isn't solved, please try again on same network. This program uses unicasting for setting IP address.
      
4) Copyright and Trademark Information :
----------------------------------------
This software is copyrighted 2001 by Xerox Corporation.