hptcpmon.ini Driver File Contents (dj460it.exe)

;
; Used by Standard TCP/IP Port Monitor to determine the type of port
;
;
; Section names should be less than 60 characters
;

[Ports]
"HP *J.sp.00*" 			= HP_JD_EX_1
"HP *JETDIRECT EX*" 		= HP_JD_EX
"HP *"				= HP_Jetdirect
"Lexmark Optra *"		= Lexmark_Optra
"Lexmark MarkNet XLe 302*"	= Lexmark_ex_3
"MarkNet Pro 3*"                = Lexmark_ex_3
"Marknet Pro 1*"		= Lexmark_ex_1
"Lexmark MarkNet XLe 202*"	= Lexmark_ex_2
"IBM Network*"			= IBM_NP
"NetportExpress*PRO* 3-port*"  	= Intel_PRO_3
"NetportExpress*PRO* single*"  	= Intel_PRO_1
"NB*"				= Canon
"NetQue*"			= Emulex_ex
"NETJet*"			= Emulex_MIO
"Xerox SESS SNMP Agent*"	= Xerox_dcs

[Lexmark_Optra]
PORTS		= 1
NAME		= "Stampante di rete Lexmark"
PROTOCOL1	= "RAW"
PORTNUMBER1	= 9100
SNMP1		= "Yes"

[Lexmark_ex_3]
NAME		= "Server di stampa esterno Lexmark (3 porte)"
PORTS		= 3
PROTOCOL1	= "RAW"
NAME1		= "Parallela 1"
PORTNUMBER1	= 9100
SNMP1		= "NO"
PROTOCOL2	= "RAW"
NAME2		= "Parallela 2"
PORTNUMBER1	= 9102
SNMP2		= "NO"
PROTOCOL3	= "RAW"
NAME3		= "Seriale"
PORTNUMBER1	= 9109
SNMP3		= "NO"

[Lexmark_ex_2]
NAME		= "Server di stampa esterno Lexmark (2 porte)"
PORTS		= 2
PROTOCOL1	= "RAW"
NAME1		= "Parallela 1"
PORTNUMBER1	= 9100
SNMP1		= "NO"
PROTOCOL2	= "RAW"
NAME2		= "Parallela 2"
PORTNUMBER1	= 9102
SNMP2		= "NO"

[Lexmark_ex_1]
NAME		= "Server di stampa esterno Lexmark (1 porta)"
PORTS		= 1
PROTOCOL1	= "RAW"
NAME1		= "Parallela 1"
PORTNUMBER1	= 9100
SNMP1		= "NO"

[HP_Jetdirect]
PORTS		= 1
NAME		= "Hewlett-Packard JetDirect"
PROTOCOL1	= "RAW"
PORTNUMBER1	= 9100
SNMP1		= "?"

[HP_JD_EX_1]
NAME		= "Hewlett-Packard JetDirect Ex (porta singola)"
PORTS		= 1
NAME1		= "Parallela"
PROTOCOL1	= "RAW"
PORTNUMBER1	= 9100
SNMP1		= "?"

[HP_JD_EX] 
NAME		= "Hewlett-Packard JetDirect Ex"
PORTS		= 3
PROTOCOL1	= "RAW"
COMMUNITYNAME1  = "public"
PORTNUMBER1	= 9100
SNMP1		= "?"
NAME1		= "Parallela 1"
protocol2	= "RAW"
COMMUNITYNAME2  = "public2"
portnumber2	= 9101
snmp2		= "?"
name2		= "Parallela 2"
protocol3	= "RAW"
COMMUNITYNAME3  = "public3"
portnumber3	= 9102
name3		= "Parallela 3"
snmp3		= "?"

[IBM_NP]
PORTS		= 1
NAME		= "Stampante di rete IBM"
PROTOCOL1	= "LPR"
QUEUE1		= "PASS"
SNMP1		= "Yes"

[Intel_PRO_3]
name		= "Intel Netport Pro (3 porte)"
PORTS		= 3
NAME1		= "Parallela1"
QUEUE1		= "PASS_LPT1"
NAME2		= "Parallela2"
QUEUE2		= "PASS_LPT2"
NAME3		= "Seriale"
QUEUE3		= "PASS_COM"
PROTOCOL1	= "LPR"
protocol2	= "LPR"
protocol3	= "LPR"
SNMP1		= "NO"
snmp2		= "NO"
snmp3		= "NO"

[Intel_PRO_1]
name		= "Intel Netport Pro (porta singola)"
PORTS		= 1
NAME1		= "Parallela1"
QUEUE1		= "PASS_LPT1"
PROTOCOL1	= "LPR"
SNMP1		= "NO"

[Canon]
Name		= "Stampante di rete Canon"
ports		= 1
protocol1	= "LPR"
queue1		= "x"
snmp1		= "yes"

[Xerox_dcs]
name		= "Xerox DCS"
ports		= 1
protocol1	= "LPR"
queue1		= "lp"
snmp1		= "no"

[Emulex_MIO]
name		= "Scheda IOM interna Emulex"
ports		= 1
protocol1	= "LPR"
queue1		= "PASSTHRU"
snmp1		= "NO"

[Emulex_ex]
name		= "Emulex NetQue"
ports		= 2
name1		= "Parallela"
protocol1	= "RAW"
portnumber1	= 2501
snmp1		= "no"
name2		= "Seriale"
protocol2	= "RAW"
portnumber2	= 2502
snmp2		= "no"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.85