;******************************************************************** ; ; Allied Telesyn AT-2500TX Miniport Driver OEMSETUP File ; for WinNT 3.5x, WinNT 4.0 ; (NDIS 4.0 driver) ; ;******************************************************************** [Identification] OptionType = NetAdapter [PlatformsSupported] PCI [Options] AT2500 [FileConstants] UtilityInf = "UTILITY.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 ;;;1997,06,10 NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\a25v3m4.SYS" NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\a25v3m4.SYS" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Allied Telesyn" ProductMajorVersion = "03" ProductMinorVersion = "11" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "AT-2500v2" ProductSoftwareImagePath = "%SystemRoot%\System32\drivers\a25v3m4.SYS" NetRuleSoftwareType = "AT2500Sys ndisDriver AT2500Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """AT2500Sys"" yes no container" NetRuleSoftwareClass = {"AT2500Driver basic"} NetRuleSoftwareBindable = {"AT2500Driver AT2500Adapter non exclusive 100"} ProductHardwareName = "AT-2500v2" NetRuleHardwareBindForm = " yes yes container" ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" FunctionTitle = "Allied Telesyn AT-2500TX PCI 10/100 Ethernet Adapter Setup" ProductSoftwareDescription = "Allied Telesyn AT-2500TX PCI 10/100 Ethernet Adapter Driver" ProductSoftwareTitle = "Allied Telesyn AT-2500TX PCI 10/100 Ethernet Adapter Driver" ProductHardwareAT2500Title = "Allied Telesyn AT-2500TX PCI 10/100 Ethernet Adapter" ProductHardwareAT2500Description = "Allied Telesyn AT-2500TX PCI 10/100 Ethernet Adapter" NetRuleHardwareAT2500Type = "AT2500 AT2500Adapter" NetRuleHardwareAT2500Class = {"AT2500Adapter basic"} AdapterAT2500Type = 5 ;; PCI board AT2500CFID = 2168000748 ;; 0x813910EC [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers NT350VersionConstant = "3.50" NT310VersionConstant = "3.10" [date] Now = {} ? $(!LIBHANDLE) GetSystemDate ; ; The [Identify] section is the first section executed by Setup. It ; returns information to Setup about the type of drivers that can ; be installed by this .INF file (in our case, network drivers). ; [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ; ; If the [Identify] section indicates that the .INF file supports ; the appropriate type of driver, Setup calls the [ReturnOptions] ; section. Setup passes a single parameter to this section, ; indicating the language to be used for dialog strings. This ; section returns information to the Setup program, listing the ; names of any drivers which can be installed by this .INF file. ; It also returns the text strings for each driver to be used in ; the dialog box asking the user to select the driver to install. ; [ReturnOptions] ; ; Initialize variables to failure state. ; set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} ; ; See if our language list supports the language specified. ; If a second parameter was passed in, see if it is a supported ; platform. ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; ; If we get here, we are successful, so return the option list. ; returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL ; ; Exit from this section. ; finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ; ; If the [ReturnOptions] section returns successfully, indicating ; the language is supported, Setup displays a dialog box from which ; the user can select a driver to install. Setup then calls the ; [InstallOption] section, with the following parameters: ; ; Language to use ; OptionID to install ; SourceDirectory ; AddCopy (yes/no) ; DoCopy (yes/no) ; DoConfig (yes/no) ; ; ScrDir seems to always be A:\, even when you later install from ; the oemnad#.inf which is copied to the system32 directory. ; ; AddCopy and DoCopy are valid only when NTN_InstallMode = install. ; AddCopy is yes if the files should be added to the copy list. ; DoCopy is yes if CopyFilesInCopyList should be called. ; ; DoConfig is not used for network cards. ; ; This .INF file is automatically copied to the SYSTEM32 directory, ; by WinNT, and renamed so as to have a unique name. ; [InstallOption] ;;; ;;; Change "Set !G:DebugOutputControl=0" to 1 in NCAPSHEL.INF for debug support. ;;; ;;; set !G:DebugOutputControl=1 ;; Debug output {1=turned on, 0= turned off} ; ; Read input parameters. ; set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) ; ; Check if specified language is supported. ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif ; ; Set up local variables and constant values. ; set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants ; set NetRuleSoftwareBindable = $($R1) read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = "OK" endif read-syms FileConstants$(!STF_LANGUAGE) read-syms FileDependentDlg$(!STF_LANGUAGE) set OptionHelpFile = AT2500.hlp SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) detect date set-title $(Function$(Option)Title) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait ;; ; ;; ; Problem was discovered using unattend.txt files for automatic ;; ; installation. It was found that $2 passed into this section does ;; ; not have an appropriate value when using unattend.txt. It was ;; ; found that during manual AND unattended installations, the variable ;; ; STF_SRCDIR_OVERRIDE did contain an appropriate value. ;; ; ;; ifstr(i) $(!STF_SRCDIR_OVERRIDE) != "" ;; set SrcDir = $(!STF_SRCDIR_OVERRIDE) ;; endif Begin = + ;; ;; Get the Version of Windows NT we are installing on. This will allow us to use the ;; PCI Support that will be included in NT v3.51 ;; set CurrentVersionValue = "" OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt Ifstr(i) $(KeyNt) != "" GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue) CloseRegKey $(KeyNt) Endif ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) ;; NT v3.10 not supported! Debug-Output "$(InfFile) $(Option): Configureadapter" set Error = "Windows NT v3.10 is not support by this product" goto fatal endif ; set ActivateDetection = FALSE ; ; NTN_InstallMode ; install - this is a primary or original installation, it ; may be an upgrade ; deinstall - this product and its binaries are to be removed ; from the disk ; configure - this product is to be (re-) configured ; bind - this product's relationships to other products ; have changed and should be reviewed. ; Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo else set StartLabel = configureadapter endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE endif ;; ; ;; ; HARDWARE_PUT_IN_REGISTRY gets set to true once the hardware ;; ; component is installed. That way if we get an error we know ;; ; to uninstall it. HWList has the path to the hardware that ;; ; is needed by RemoveHardwareComponent. ;; ; ;; ; SOFTWARE_PUT_IN_REGISTRY gets set to true once the software ;; ; component is installed. ;; ; ;; set HARDWARE_PUT_IN_REGISTRY = $(FALSE) ;; set HWList = "" ;; set SOFTWARE_PUT_IN_REGISTRY = $(FALSE) Debug-Output "$(InfFile) $(Option): ==================================================" Debug-Output "$(InfFile) $(Option): STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "$(InfFile) $(Option): STF_SRCDIR is: "$(!STF_SRCDIR) Debug-Output "$(InfFile) $(Option): STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "$(InfFile) $(Option): Option is: "$(Option) Debug-Output "$(InfFile) $(Option): !STF_NCN_InstallMode is:"$(!NTN_InstallMode) Debug-Output "$(InfFile) $(Option): !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "$(InfFile) $(Option): !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "$(InfFile) $(Option): !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "$(InfFile) $(Option): !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "$(InfFile) $(Option): !STF_GUI_UNATTENDED is: "$(!STF_GUI_UNATTENDED) Debug-Output "$(InfFile) $(Option): !STF_BusType is $(!STF_BUSTYPE)" ;; Primary Bus Debug-Output "$(InfFile) $(Option): !STF_BusTypeList is $(!STF_BUSTYPELIST)" ;; All Buses Debug-Output "$(InfFile) $(Option): ==================================================" Set EtherID = "" Set NetworkAddress = "000000000000" set from = $(fatal) set to = $(fatal) goto $(StartLabel) ;------------------------------------------------------------------------ ; InstallMode = install ; Came here straight from figuring out which platform we are on. ; Option, SrcDir, AddCopy, DoCopy, and DoConfig are valid. ; installadapter = + install "Install-Hlp" Debug-Output "$(InfFile) $(Option): Installadapter" ; ; Get open handle KeyProduct. ; Returns an empty string if key does not exist. ; ; NTN_RegBase appears empty on the installation of the first card. ; KeyProduct will be KeyNull on the installation of the first card. ; OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) ; Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ ; $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else ; Shell $(UtilityInf), CardExistedDlg ; ifint $($ShellCode) != $(!SHELL_CODE_OK) ; Debug-Output "ShellCode error: cannot get an error string." ; goto ShellCodeError ; endif ; ifstr(i) $($R1) != "OK" ; set CommonStatus = STATUS_USERCANCEL ; goto end ; endif set OldVersionExisted = $(TRUE) endif Endif Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif ; Set SrcDir = $($R1) ; Set SrcDir = "A:\DRIVER" ; Goto adapteroptions Goto installproduct configureadapter = + Debug-Output "$(InfFile) $(Option): Configureadapter" Ifstr(i) $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Goto fatalregistry Endif Endif Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "DuplexMode" set DuplexModeIndex = $(ValueData) else-ifstr(i) $(ValueName) == "EtherID" set EtherID = $(ValueData) else-ifstr(i) $(ValueName) == "NetworkAddress" set NetworkAddress = $(ValueData) else-ifstr(i) $(ValueName) == "EarlyTxThreshold" ;luke add3 show preseting vlue set EarlyTxThreshold = $(ValueData) endif EndForListDo set DuplexModeValue = *($(DuplexModeList), ~($(DuplexModeValues),$(DuplexModeIndex))) ifstr(i) $(DuplexModeValue) == "" set DuplexModeValue = *($(DuplexModeList), 1) endif ;;; set Error = "Cannot configure the software component" ;;; goto fatal adapteroptions = + Debug-Output "$(InfFile) $(Option): Adapteroptions" set from = adapteroptions read-syms FileDependentDlg$(!STF_LANGUAGE) SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id) ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"At2500.hlp 10 30 ui start "InputDlg" ; ifstr(i) $(DLGEVENT) == "CONTINUE" ; set DuplexModeIndex = $(Combo1Out) ; ui pop 1 ; else-ifstr(i) $(DLGEVENT) == "BACK" ; set CommonStatus = STATUS_USERCANCEL ; ui pop 1 ; goto end ; else ; ui pop 1 ; goto end ; endif ifstr(i) $(DLGEVENT) == "CONTINUE" set DuplexModeIndex = $(Combo1Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else ui pop 1 goto end endif set DuplexModeValue = *($(DuplexModeValues), ~($(DuplexModeList),$(DuplexModeIndex))) set EtherID = "" ;;;;;;;;;;;;;;;;;;Ether ID;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; read-syms NetworkAddressDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" ;;set EtherID = $(EditTextOut) set NetworkAddress = $(EditTextOut) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" ui pop 1 else ui pop 1 goto end endif ; set EarlyTxThreshold = "09" ;;;;;;;;;;;;;;;;;;Ether ID;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; read-syms EarlyTxThresholdDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set EarlyTxThreshold = $(EditTextOut) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" ui pop 1 else ui pop 1 goto end endif ifstr(i) $(!NTN_InstallMode) == configure goto updateparameters endif ;; ifstr(i) $(!NTN_InstallMode) == configure ;; goto updateparameters ;; endif installproduct =+ Debug-Output "$(InfFile) $(Option): installproduct" StartWait set AdapterList = $($R1) ifint $(OldVersionExisted) == $(FALSE) Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif ; ; Check to see if the Product Software key exists already in the system service keys ; before we try to add the software component. ; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt CloseRegKey $(KeyNt) Ifstr(i) $(KeyNt) == "" Debug-Output "$(InfFile) $(Option): AddSoftwareComponent" Debug-Output "$(InfFile) $(Option): --> $(Manufacturer)" Debug-Output "$(InfFile) $(Option): --> $(ProductSoftwareName)" Debug-Output "$(InfFile) $(Option): --> $(ProductSoftwareTitle)" Debug-Output "$(InfFile) $(Option): --> $(STF_CONTEXTINFNAME)" Debug-Output "$(InfFile) $(Option): --> $(ProductSoftwareImagePath)" Debug-Output "$(InfFile) $(Option): --> $(NetEventDLL)" Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) goto fatalregistry endif Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait goto fatalregistry endif endif ;; Does Services\AT2500 exist? set NTDetected = $(FALSE) Debug-Output "$(InfFile) $(Option): About to look for AT2500 PCI Cards" ;; ;; we must be installing a PCI card. ;; ;; Note: If we are are on WinNT v3.51 and above, we have PCI detection support ;; and are able to setup the adapter without user intervention. Otherwise, we can ;; only do one card at a time. ;; set TargetVersion = *($(CurrentVersionValue),4) Debug-Output "$(InfFile) $(Option): Current Version:"$(TargetVersion) ifstr $(TargetVersion) == $(NT350VersionConstant) ;; We need to ask on v3.50 Debug-Output "Running on WindowsNT 3.50" set Version350 = $(TRUE) else Debug-Output "Running on WindowsNT 3.51" set Version350 = $(FALSE) endif ifint $(Version350) == $(TRUE) Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!" ifstr $(!STF_GUI_UNATTENDED) == "YES" Debug-Output "$(InfFile) $(Option): Running in GUI unattended mode" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 5 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif set NTDetected = $(FALSE) set AdapterList = $(Option) ;; 1 Item to install Debug-Output "$(InfFile) $(Option): BusInterfaceType = $(BusInterfaceType)" Debug-Output "$(InfFile) $(Option): BusNumber = $(BusNumber)" else Debug-Output "$(InfFile) $(Option): Running 3.50 Bus Dialog" set BusInterfaceType = 5 set BusNumber = 0 set NTDetected = $(FALSE) Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set BusInterfaceType = $($R1) set BusNumber = $($R2) set AdapterList = $(Option) ;; 1 Item to install Debug-Output "$(InfFile) $(Option): BusInterfaceType = $(BusInterfaceType)" Debug-Output "$(InfFile) $(Option): BusNumber = $(BusNumber)" endif else Debug-Output "$(InfFile) $(Option): Running 3.51 using PCI Dectection" ;; ;; v3.51 has PCI detection code built in. ;; ;;set BusInterfaceType = 5 ;;set BusNumber = 0 ;; Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber) set NTDetected = $(TRUE) set VendorID = 4332 ;; 0x10EC is REALTEK's Vendor ID set DeviceID = 33081 ;; 0x8139 is AT2500's Device ID ;;set-div CFID = $($(Option)CFID) 1 Debug-Output "$(InfFile) $(Option): VendorID = $(VendorID)" Debug-Output "$(InfFile) $(Option): DeviceID = $(DeviceID)" ;;Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(CFID) Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R0) == {} set Error = $(CANNOT_FIND_ANY_CARD) set CommonStatus = USER_CANCEL set from = end goto nonfatal endif set AdapterList = $($R0) endif ;;; NT v3.50 endif ;;; Looking for PCI cards in Option. ; "AdapterList" has the list of currently installed adatpers in the system! ; Debug-Output "$(InfFile) $(Option): Adapterlist = $(AdatperList)" ForListDo $(AdapterList) Set InstallCard = "YES" ifint $(NTDetected) == $(TRUE) set DetectedBusNum = *($($),1) set DetectedSlotNum = *($($),2) Debug-Output "$(InfFile) $(Option): DetectedBusNumber = $(DetectedBusNum)" Debug-Output "$(InfFile) $(Option): DetectedSlotNum = $(DetectedSlotNum)" Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), + $(DetectedSlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr $($R0) != "NO_ERROR" set Error = $($R0) goto fatal endif ifstr(i) $($R1) == "YES" set InstallCard = "NO" ;; Don't want to re-install, it's there already endif endif ;; ;; Are we installing the card? ;; ifstr(i) $(InstallCard) == "NO" Debug-Output "$(InfFile) $(Option): Card Already at $(DetectedBusNum):$(DetectedSlotNum) already installed!" set Error = "An adapter at $(DetectedBusNum):$(DetectedSlotNum) is already installed!" Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif else Debug-Output "$(InfFile) $(Option): Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!" Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR" EndWait CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set EarlyTxThreshold = 09 set DuplexModeValue = *($(DuplexModeValues), ~($(DuplexModeList),$(DuplexModeIndex))) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ; luke add1 unattend Debug-Output "$(InfFile) $(Option): Running in GUI unattended mode" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 5 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif goto skiplaa1 endif read-syms FileDependentDlg$(!STF_LANGUAGE) SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id) ;SetHelpFile $(!STF_WINDOWSSYSPATH)"\"At2500.hlp 10 30 ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set DuplexModeIndex = $(Combo1Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL ui pop 1 goto end else ui pop 1 goto end endif set DuplexModeValue = *($(DuplexModeValues), ~($(DuplexModeList),$(DuplexModeIndex))) set EtherID = "" ;;;;;;;;;;;;;;;;;;Ether ID;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; read-syms NetworkAddressDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" ;;set EtherID = $(EditTextOut) set NetworkAddress = $(EditTextOut) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" ui pop 1 else ui pop 1 goto end endif ; set EarlyTxThreshold = 09 read-syms EarlyTxThresholdDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set EarlyTxThreshold = $(EditTextOut) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" ui pop 1 else ui pop 1 goto end endif skiplaa1 =+ Set HardNetCardKey = $($R1) Set HardNetRuleKey = $($R2) Set HardParameterKey = $($R3) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ; ; PCI ; set BusTypeNum = 5 set BusMaster = "YES" set Bus = "PCI" ifstr(i) $(Option) == "AT2500" set CardType = 2 else set CardType = 0 endif ;; ;; If we used the OS to dected the card, then we already know bus and slot information. ;; ifint $(NTDetected) == $(TRUE) set BusNumber = $(DetectedBusNum) set SlotNum = $(DetectedSlotNum) set BusInterfaceType = $(BusTypeNum) ; ; Note: we need to record SlotNumber too so that we can use the ; "IsNetCardAlreadyInstalled" routine ; Set NewValueList = {+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {Slot,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}+ } Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif Set NewValueList = { {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)} } Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif else Set NewValueList = {+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ } Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif endif Set NewValueList = {+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)},+ } Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set NewValueList = {{DuplexMode,$(NoTitle),$(!REG_VT_DWORD),$(DuplexModeValue)},+ {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+ {EarlyTxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(EarlyTxThreshold)}} Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ; luke add2 Input parameter Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Debug-Output "$(InfFile) $(Option): HardwareRuleKey = $(NewValueList)" Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(HardNetCardKey) CloseRegKey $(HardNetRuleKey) CloseRegKey $(HardParameterKey) endif EndForListDo EndWait goto successful updateparameters =+ Debug-Output "$(InfFile) $(Option): Updateparameters" set HardParameterKey = $($R3) set NewValueList = {{DuplexMode,$(NoTitle),$(!REG_VT_DWORD),$(DuplexModeValue)},+ {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+ {EarlyTxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(EarlyTxThreshold)}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ; luke add2 Input parameter Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif CloseRegKey $(KeyParameters) goto successful bindingadapter =+ Debug-Output "$(InfFile) $(Option): bindingadapter" set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Debug-Output "$(InfFile) $(Option): removeadapter" Debug-Output "$(InfFile) $(Option): ----> $(ProductKeyName), $(!NTN_RegBase)" Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + Debug-Output "$(InfFile) $(Option): UpdateSoftware" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + Debug-Output "$(InfFile) $(Option): Successful" goto end abandon = + Debug-Output "$(InfFile) $(Option): Abandon" ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Debug-Output "$(InfFile) $(Option): warning" Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Debug-Output "$(InfFile) $(Option): nonfatalinfo" Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Debug-Output "$(InfFile) $(Option): nonfatal" Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + Debug-Output "$(InfFile) $(Option): nonfatalmsg" ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else ; goto "end" goto "RemoveAdapter" endif fatalregistry = + Debug-Output "$(InfFile) $(Option): fatalregistry" Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + Debug-Output "$(InfFile) $(Option): fatal" ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + Debug-Output "$(InfFile) $(Option): ShellCodeError" set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + Debug-Output "$(InfFile) $(Option): Setfailed" set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif Exit [Install-Hlp] set STF_VITAL = "" AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "Allied Telesyn AT-2500TX CardAsistant Disk" [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, oemsetnt.inf, SIZE=1000, RENAME=$(!UG_Filename) [Files-Hlp] 1, AT2500.HLP , SIZE=10000 ; ; Driver files ; [Files-AT2500] 1,a25v3m4.SYS , SIZE=50000 [LanguagesSupported] ENG [OptionsTextENG] AT2500 = "Allied Telesyn AT-2500TX PCI 10/100 Ethernet Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" DuplexModeList = ^(DuplexModeDlg, 1) DuplexModeValues = ^(DuplexModeDlg, 2) NoList = ^(NoChoices, 1) NoValues = ^(NoChoices, 2) ShellCodeErrorTitle = "Error: "$(Function$(Option)Title) ShellCodeErrorText = "Shell Code Error." CANNOT_FIND_ANY_CARD = "The AT-2500TX is not present in the system" [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" ;HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] DlgText = "Choose the Duplex Mode from the pull-down list."$(!LF) Combo1Label = "Speed/Duplex Setting: " DlgTemplate = "ADAP_PROTO_COMBO" DlgType = "Combination" ;Caption = $(Function$(Option)Title) Caption = "Duplex Mode " Combo1List = $(DuplexModeList) Combo1Out = $(DuplexModeValue) ComboListItemsIn = {Combo1List} ComboListItemsOut = {Combo1Out} EditTextLim = "" CBOptionsGreyed = {} MinHelpId = 10 MaxHelpId = 40 ;HelpContext = $(Help$(Option)Id) HelpContext = 20 [DuplexModeDlg] DuplexMode_0 = "Use Hardware Settings (SETUP25)", 0 DuplexMode_1 = "Auto-Sense", 1 DuplexMode_2 = "10Mb / Half Duplex", 2 DuplexMode_3 = "10Mb / Full Duplex", 3 DuplexMode_4 = "100Mb / Half Duplex", 4 DuplexMode_5 = "100Mb / Full Duplex", 5 [NetworkAddressDlgENG] Caption = "Network Address (LAA)" DlgText = "This option is only required when you need to "+ "override the factory-programmed MAC address" Edit1Label = "&Network Address:" Continue = "&OK" Exit = "&Skip" Help = "&Help" DlgType = "Edit" DlgTemplate = "QUERY_COMPUTER_NAME" EditTextLim = 17 EditTextIn = $(NetworkAddress) EditFocus = "ALL" HelpContext = 30 [EarlyTxThresholdDlgENG] Caption = "Early TX Threshold" DlgText = "Value range: 0 - 3f (hex)" Edit1Label = "&Threshold Value:" Continue = "&OK" Exit = "&Skip" Help = "&Help" DlgType = "Edit" DlgTemplate = "QUERY_COMPUTER_NAME" EditTextLim = 2 EditTextIn = $(EarlyTxThreshold) EditFocus = "ALL" HelpContext = 40Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.