SCO UNIX 4.X This is an ASCII file called SCO4.TXT in the ATI CardAssistant INFO directory. Use a text editor or a word processor with a mono-space font such as Courier to print this file if needed for reference. ************************************************************ ************************************************************ ** ** ** Installing the AT-2500 Driver on SCO 4.x ** ** ** ************************************************************ ************************************************************ ------------------------------------------------------------ -- Contents -- ------------------------------------------------------------ I. Special Considerations II. Files Needed for Installation III. Installing the AT-2500 with SCO 4.x I. Special Considerations ========================= This document describes the procedure to install the SCO UNIX driver for the AT-2500 Fast Ethernet adapter. Configuration of the AT-2500TX is under PCI control, and the AT-2500TX is NWAY capable. For most applications, no setup other than normal installation of the network software is necessary. For any half-duplex application, the card by default auto-detects the speed of the link (10 Mbps or 100 Mbps). If the connection is full-duplex without NWAY capability, you must select one of the full-duplex settings. In this case, refer to the "Connection speed and duplex" information file. II. Files Needed for Installation ================================= Location of Files: \SCO\4.X The following files will be used in this installation: ------------------------------------------------------ DRIVER.O : SCO Driver INSTALL : Transfer DOS format to UNIX format setup INFO : Used by netconfig INIT : Used by netconfig MASTER : Used by netconfig NODE : Used by netconfig RECONF : Used by netconfig REMOVE : Used by netconfig SPACE.C : Used by netconfig SYSTEM : Used by netconfig III. Installing the AT-2500 with SCO 4.x ======================================== Before you start with the installation process, make sure that the SCO UNIX system is properly installed. Similarly, your adapter should also be properly installed in your machine. 1. Login as root user. (On maintenance mode) 2. Put CardAssistant diskette to floppy A: and use doscp command to copy the file "install" for installing SCO UNIX PCI Driver into UNIX directories as following : # cd / # doscp A:/SCO/4.X/install /install # chmod +x /install # ./install The install program will ask you for the path. Key in: a:/sco/4.x 3. Use the netconfig utility; available options : # netconfig The screen displays the following message. Select item (1) to Add a chain : 1) Add a chain 2) Remove a chain 3) Reconfigure an element in a chain 4) Quit 4. After this step is completed, the screen displays the next options message : Select item (4) : sco_tcp SCO TCP/IP for UNIX 5. When you have completed this step, various adapter drivers are installed in SCO UNIX. Select "AT-2500 PCI Fast Ethernet". 6. Add chain sco_tcp -> r6e0 (y/n), TYPE 'y' 7. Enter the IP address of this interface , for example : 192.9.9.1 8. Enter the subnet mask for this interface (default 255.255.255.0). 9. Does the interface use a broadcast address of all 1's (y/n), default : y 10. Enter the broadcast address for this interface, default : xxx.xx.x.255; press ENTER 11. Are these values correct ? (y/n) TYPE 'y' 12. Pseudo ttys are currently configured, do you want to: 1) Add Pseudo ttys 2) Remove Pseudo ttys Select an option or enter q to quit [q] TYPE 'q' 13. Available options: 1) Add a chain 2) Remove a chain 3) Reconfigure a element in a chain q. Quit Select option: q 14. Do you want to relink to kernel now ? y 15. Do you want this kernel to boot by default (y/n) y 16. Do you want the kernel environment rebuilt (y/n) y 17. Reboot UNIX: # shutdown -g0 * Third-party trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.