PATHWORK.TXT Driver File Contents (df530.zip)

          D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
                   for DECnet PATHWORK v4.0


 Getting Started
 ---------------
    DECnet PathWork provides a NETSET.EXE program for installing NDIS
    drivers. For information on the usage of this program, please refer
    to the DECnet installation manual.

    - Install DECnet PathWork selecting 3Com's Etherlink II card.

    - Modify your CONFIG.SYS file to include the following lines:

        device = c:\decnet\ELNKII.SYS

        to

        device = c:\decnet\DLKFET.DOS


    - Modify the following lines in your PROTOCOL.INI file:

        [ELNKMACII]
        drivername = ELNKII$
        ioaddress = 0x300
        interrupt = 3
        xmitbufs = 2

        [IPX4MAC]
           :
        bindings = ELNKMACII
           :

        [DATALINK]
           :
        bindings = ELNKMACII
           :

        to

        [DLKFET]
        drivername = DLKFET$

        [IPX4MAC]
           :
        bindings = DLKFET
           :

        [DATALINK]
           :
        bindings = DLKFET
           :


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.10