Tektronix Inc. Graphics Printing & Imaging Division Technical Support 26600 SW Parkway M/S 63-630 Wilsonville, OR 97070-1000 800-835-6100 AppleLink Tek.Support BBS: 503-685-4504 BINARY.PS This file when used in conjunction with IOPUMPER.EXE can be used to send binary encoded PostScript files via a PC parallel port to any Tektronix PostScript printer. IOPUMPER.EXE may also be downloaded from the BBS at 503-685-4504. From a DOS prompt copy the BINARY.PS file to your printer. For example, you would type: C:> COPY BINARY.PS LPT1: Where "C:" is the drive the BINARY.PS file is located and "LPT1" is the PC's parallel port connected to your printer. To display detailed instructions on IOPUMPER type: C:> IOPUMPER Or, use the following typical command line. From DOS enter: C:> IOPUMPER /d /t /q (filename) LPQ1 Where "(filename)" is the appropriate binary encoded PostScript file.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.