1. n4018725.exe Driver
2. MUST_READn24_32_40.txt File Contents

MUST_READn24_32_40.txt Driver File Contents (n4018725.exe)

Xerox DocuPrint N24/N32/N40
Version 1.8 Controller Software

WARNING!

Before downloading the new Version 1.8 Controller Software to your
N24/N32/N40 printer, please read the following notice: 

WARNING TO HARD DISK USERS: If you have an optional Hard Disk Drive
installed in your printer, when the Version 1.8 Controller Software
is downloaded the Hard Disk will automatically be re-partitioned and
re-formatted. These actions are necessary in order to implement
certain new features and capabilities in the Version 1.8 software.
You should be aware, however, that any files or resources (fonts,
macros, unprinted secure/proof jobs, etc.) that you have stored on
the Hard Disk at the time Version 1.8 is being installed will be
deleted when the disk re-formatting takes place. Therefore, any
files or resources currently stored on the Hard Disk which will be
required for future printing applications will need to be downloaded
to the Hard Disk again following the installation of the
Version 1.8 software. 

UPDATED DRIVERS: When you install the new Version 1.8 Controller
Software in your printer, we strongly recommend that you also
download an updated set of Printer Drivers from this web site. This
will ensure that the driver software you are using is fully
compatible with the printer software you have installed, and will
allow you to access all of the new and improved features. 

If there is anything about these notices that you do not understand,
or need further information about, please contact Xerox Customer
Support. If desired, a complete set of Release 1.8 User Documentation
for your product can be downloaded from the Xerox Network Printers
Web Site, which can be accessed by pointing your Web Browser to the
following URL:

	http://xerox.networkprinters.com/docs/docs.asp 

Printer Firmware Upgrade  The latest version of printer firmware
currently available is Release 1.87. Before loading this version of
firmware, your printer must be configured with a minimum of 24MB of
RAM (the 8MB of permanently installed RAM plus at least 16MB of DRAM
SIMMs). It is your responsibility to add to your printer whatever
DRAM SIMMs are required to reach this minimum memory configuration
before attempting to load the Release 1.87 printer firmware. If your
printer is an N24 or N32, any SIMMs added must be rated at 70nsec or
faster. If your printer is an N40, any SIMMs added must be rated at
50nsec or faster, and must be of the Extended Data Output (EDO) type.
If you are unsure of the memory configuration in your printer or the
firmware version currently installed, use the appropriate Control
Panel menu selection to print a Configuration Sheet.

NOTE: If the printer firmware currently installed in your N24/N32 is
below level 1.74, certain other firmware updates may be required for
the printer to be able to take full advantage of all Release 1.87
features and capabilities. If your printer is currently running
firmware below level 1.74, please download the 1.74 firmware update from
the Xerox Software and Drivers web site:

	http://www.officeprinting.xerox.com/perl-bin/opb_drivers.pl.

To retrieve the 1.74 firmware file, you will need to enter the file name in the field "Enter a full or partial filename here".  You will search for the following:

	blind n32174.exe

Make sure to enter the word "blind" before the file as this firmware file is not returned through normal search results.