1. CATLaunchInstallWin98And2k01_00_0006.exe Driver
2. F5825_Readme.txt File Contents

F5825_Readme.txt Driver File Contents (CATLaunchInstallWin98And2k01_00_0006.exe)

Customer Admin Tool version 01.00.0006
Copyright (C) 2002 Xerox Ltd.
All Rights Reserved


Table of Contents:
==============

1. Description
2. Features
3. System Requirements
4. Distribution
5. Installation
6. Further Help


1. Description
==============

The Customer Admin Tool consists of a suite of tools for performing 
administrative tasks on the Xerox Document Centre 555/545/535 
family of products.  All the tools connect to the device using a
Universal Serial Bus (USB) connection.


2. Features
===========

Software Upgrade - A tool for upgrading the software on the device

Auditron Data Save/Restore - A tool for backing up Auditron data and 
accounts, and generating reports from Auditron data held within the device.


3. System Requirements
======================

The following minimum configuration is required:

- An IBM Compatible PC running Windows 98, Me, 2000, or XP
- A Type A USB port
- A USB A-B cable for connecting PC to device
- A CD-ROM drive or internet connection
- Internet Explorer v4.01 or later

Following installation see the individual help files for additional tool 
specific requirements.


4. Distribution 
===============

This product contains the following key files:

Readme.txt     - Introductory information (this file)
Setup.exe      - Customer Admin Tool setup application
SIPUSBDr.sys   - USB Driver
SIPUSBDr.inf   - USB Driver inf file


5. Installation
===============


5.1 Upgrading from a previous version
-------------------------------------

Remove the Customer Admin Tool

This can be achieved using the Add/Remove program applet within the Windows 
Control Panel.  The application Xerox Customer Admin Tool should be removed.
For Assistance, see Windows Help.

Run Customer Admin Tool setup

Select Run from the Taskbar Start menu, type the full name of the setup file 
(for example, C:\download\setup.exe), and press the Enter key.  This will start
the setup application.  Follow the prompts and online help to install.

Update the USB Driver

Power up the device, connect the USB cable between the PC and device.  
Open Start->Settings->Control Panel->System->Hardware->Device Manager, 
locate the USB section, right click on the 
'Xerox DC555/545/535 Service Port' driver and select Properties.  Select the 
Driver tab and click Update Driver.  Using the Update Wizard, select the new 
driver file.  The Driver should now be updated (unless the current version of 
the driver is the latest available in which case no update shall occur).
Power down the device.  

NOTE - the USB Driver update procedure varies slightly depending on the OS.  
For help updating the USB Driver, see Windows help.


5.2 New Installation
--------------------

Run Customer Admin Tool setup

Select Run from the Taskbar Start menu, type the full name of the setup file 
(for example, C:\download\setup.exe), and press the Enter key.  This will start
the setup application.  Follow the prompts and online help to install.

Install the USB Driver

Power up the device, connect the USB cable between the PC and device.  
The USB connection on the device is located at the rear top half.  Windows will 
detect the presence of a new USB device and request a driver.  Browse to and 
select SIPUSBDr.inf.  The driver is now installed.


6. Further Help
===============

For help with using the tools, please see the tools corresponding help file.