********************************************************************************
PROVIEW ELECTRONICS (TAIWAN) CO.,LTD. Revision Date:Oct.14,1999 Rev.:1.1
********************************************************************************
Purpose:
======= Installing your monitor driver and Use the information file (PROVIEW.INF)
for Microsoft Windows 95/98.
Contents:
========
1.0 Introduction
2.0 Installing the *.INF file
3.0 Troubleshooting
1.0 Introduction
=================
PROVIEW'S Plug & Play monitors are designed to work with Windows'95/98
operating system. PROVIEW monitors comply with VESA DDC (Display
Data Channel) Standards and are Plug & Play compatible. With the use
of a DDC compatible video card, the EDID (Extended Display Identification)
can be read from the PROVIEW Monitor by Plug & Play compatible software,
such as Windows '95/98. In order for Windows '95/98 to detect the new
monitor, you must ensure that the following minimum requirements are met:
(1).A DDC compatible video card is installed.If your video card is not
DDC compatible,then autodetection will not work.
(2).DDC detection is enabled in Windows '95/98.This should be the case
if you installed a DDC compatible video card.The *.INF file supplied
with the video card should enable DDC in Windows '95/98.If this is not
the case, then autodetection will fail.
(3).A DDC compatible monitor with its *.INF file installed into Windows '95/98.
2.0 Installing the *.INF file
==============================
Use the mouse and click in the following order:
(1).To push mouse's right buttom on Wallpaper of computer's Background then
select "Properties" to adjust Display Properties. Or you can go through
Display icon on Control Panel.
(2).Select "Settings" function.
(3).To click "Change Display Type" to change your monitor type.
(4).To click "Change" on Monitor Type, NOT Adapter Type, please note.
(5).To click "Have Disk" function on Select Device table.
(6).On Install From Disk table, please click "Browse" then select Drives to
disk C and Folders to "c:\proview" to find out the Win95/98 driver's
information of "proview.inf".
(7).Confirm the details to finish the installation.
The correct model for your monitor should be displayed if the requirements for
DDC detection are met, otherwise, choose your monitor from a list of monitors.
Choose "OK" and closed all windows.
3.0 TroubleShooting
====================
Problem: AutoDetection doesn't work.
Solution: Is DDC enable in Windows '95/98?
(1).(Right Click) My Computer
(2).--Properties
(3).--Device Manager
(4).--Monitor
If "Unknown Monitor" is displayed, then the problem could be:
(1).Damaged or wrong video cable?
(2).Bad EDID data?
(3).Non-DDC video card?
(4).DDC detection is not enabled in Windows '95/98?
If "Plug and Play Monitor (VESA DDC) " is displayed, then DDC is enabled,
but the *.INF files was not correctly installed or the *.INF file might
be damaged.Run installation procedure again or obtain the latest copy
of the *.INF file.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.