[MessageMessages] 0=Message Text not Found. [ErrorMessages] 0=Memory Allocation Error 1=Bad Time! 2=Bad Date! 3=Timeout - The data was not sent 4=NETBIOS error 5=Incompatible Revision of Mx10 and Viewer\n-OR-\nError in data from Mx10.\nPlease Re-select the Mx10. 6=Incompatible Revision of Mx10 and Viewer 7=Couldn't get the IP address of this printer! 8=The old password is wrong! 9=The new passwords don't match! 10=You must give a NEW password! 11=New Password accepted [CopierStatus] 0= 1=Idle 2=Busy 3=Feeding Paper 4=Printing Magenta 5=Printing Cyan 6=Printing Yellow 7=Printing Black 8=Fusing 9=Adjusting Quality 10=Busy & Not Ready 11=Finishing 12=Copier Offline 13=Initializing Copier 14=Copier Warming Up 15=Copier Making Copies 16=Copier In Standby 17=Copier Not Connected 18=Copier Error 19=Copier Error E061 20=Door Open 21=Paper Jam 22=Add Fuser Oil 23=Add Toner 24=Toner Waste Full 25=Add %s paper to %s 26=Set-up %s manual feed 27=Insert %s tray 28=Copier reheating 29=Copier error code: 0x%08lx 30=Enter copier user ID 31=Check machine 32=Load counter 33=Sorter Full 34=Copier status code: 0x%04x 50=Operation OK 51=Status not available 52=Invalid Operation 53=NT Driver Error [JobDetails] #CMyPropertyPage2 0= 1=Spooling 2=Spooled 3=Ripping 4=Ripped 5=Printing 6=Done 7=Error 8=* 9=Spooling * 10=Spooled * 11=Ripping * 12=Ripped * 13=Printing * 14=Done * 15=Error * 16=Form 17=--(UNTITLED)-- 18= 19=State 20= 21= 22=Size 23= 24=Creator 25=This Job had an error\nDo you want to Show the Error\nor Reprint the Job? 26=Forms cannot be reprinted 27= 28=Warning:\nThe copier is not paused!\nStopping a job requires the copier\nto be in a paused state.\nPlease \"Pause\" the copier. 29=--Not Found-- 30=c:\\cainet\\pl\\spool\\ 31=%%CAI_CONTROL_TAG:PAUSE-COPIER 32=%%CAI_CONTROL_TAG:RESUME-COPIER 33=%%CAI_CONTROL_TAG:STOP-JOB, 34=%%CAI_CONTROL_TAG:DELETE-JOB, 35=%%CAI_CONTROL_TAG:MOVE-JOB, 36=Title: %s 37=User: %s 38=Size: %d Byte 39=Non-Default Settings: 40=None #50=Control #51=Direct #52=High #53=Low #54=Done #55=Hold #56=Form 50= 51=Print 52=Print 53=Print 54=Print 55=Hold 56= 60= 61=Spooling 62=Spooled 63=Ripping 64=Ripped 65=Printing 66=Done 67=Error 68=* Error * [ReprintOptions] #CMyPropertyPage7 0=Group (333 222 111) 1=Group Reverse (111 222 333) 2=Collate (321 321 321) 3=Collate Reverse (123 123 123) 4=Group in Sorter (111-222-333) 5=Group in Sorter Reverse (333-222-111) 6=Collate in Sorter (321-321-321) 7=Collate in Sorter Reverse (123-123-123) [Files] #CMyPropertyPage4 0=Do you want to cancel the\ndownloading of the rest of the files? 1=A Mx10 has not been selected.\nCannot Download files! 2=A Windows printer has not been selected 3=Please select a printer 4=Could not add any more files! 5=Are you sure that you want to download this entire folder? 6=Couldn't open the requested file! 7=All Files (*.*)|*.*|PostScript Files (*.PS)|*.PS|| 8=All Files (*.*)|*.*|PostScript Files (*.PS)|*.PS|Acrobat Files (*.PDF)|*.PDF|jpeg Files (*.jpg)|*.jpg|| 9=Please select files to download 10=Only 128 files at a time may be selected 11=File Name 12=File Size (Bytes) 13=%!PS-Adobe-3.0\n%%Title: ^\n%%Creator: M Series Viewer v1.0\n%%CreationDate: ^\n%%For: ^\n%%EndComments\n 14=Macintosh 15=An error has occurred while\nopening this file. 16=An error has occurred while\nopening this printer. 17=An error has occurred while\nstarting this printer. 18=An error has occurred while\nstarting the page for this printer. 19=An error has occurred while\nsending the header for this printer. 20=An error has occurred while sending\nthe jpeg header to this printer. 21=An error has occurred while\nreading this file from disk.\nDo you want to try the next file? 22=An error has occurred while\nsending this file to the Mx10.\nDo you want to try the next file? [ErrorLog] #CMyPropertyPage5 0=Text File (*.txt) 1=errors.txt 2=Error Info 3=Error in creating, opening or writing\nthe error file [SpotMatch] #CMyPropertyPage8 [Accounting] #CMyPropertyPage10 0=Please Select A File Name 1=Error log is empty 2=Job Error [Administration] #CMyPropertyPage6 0=%%CAI_CONTROL_TAG:SET-TIME, 1=\r\n 2=/new_name (!COMPUTER! 3=) def \r\n /F(c:/cainet/init/dp.cmp) (w) file def \nF new_name writestring \n F (\r\n) writestring F closefile \n%%EOF\n 4=/new_name (!NAME! 5=) def \r\n /F(c:/cainet/init/dp.nam) (w) file def \n F new_name writestring \n F (\r\n) writestring F closefile /F2(c:/ethrtlk/init/dp.nam) (w) file def \nF2 new_name writestring \n F2 (\r\n) writestring F2 closefile \n%%EOF\n 6=% PS code to set DOS date and time \n/ControlFile (c:/freedom/bin/control.bat) (w) file def \nControlFile (DATE 7=\\r\\n) writestring \nControlFile closefile \n%EOF 8=Warning:\nThe copier is not paused!\nYou cannot delete all jobs.\nPlease \"Pause\" the copier. 9=%% PS code to clear all fonts \n/ControlFile (c:/freedom/bin/control.bat) (w) file def \nControlFile (delete c:\\usrfonts\\fontfile\\r\\n) writestring \nControlFile (delete c:\\usrfonts\\fontfile\\fnt*.fil\\r\\n) writestring \nControlFile (echo. > c:\\usrfonts\\fontfile\\r\\n) writestring \nControlFile closefile \n%EOF 10=%%CAI_CONTROL_TAG:DELETE-ALL-JOBS,1\r\n 11=%%CAI_CONTROL_TAG:CLEAR-ACCOUNTING-DATA\r\n 12=Accounting log is empty 13=Error in creating, opening or writing\nthe accounting file 14=%!PS-Adobe-3.0\n%%Title: --ACCOUNTING LOG--\n%%Creator: M Series Viewer v1.0\n%%For: (SYSTEM)\n%%EndComments\n 15=(c:/docupres/ps/account.ps)run\n 16=%!PS-Adobe-3.0\n%%Title: --COLOR TEST PAGE--\n%%Creator: M Series Viewer v1.0\n%%For: (SYSTEM)\n%%EndComments\n 17=(c:/docupres/ps/colortst.ps)run\n 18=%!PS-Adobe-3.0\n%%Title: --DIAGNOSTICS--\n%%Creator: M Series Viewer v1.0\n%%For: (SYSTEM)\n%%EndComments\n 19=(/var/log/docupresslog) (DIAGNOSTIC)(/docupres/ps/prttext.ps) run\n 20=Accounting Information File name 21=Accounting Info 22=Set Mx10 Date 23=Set Mx10 Time 24=Set Mx10 Windows Name 25=Set Mx10 Ethertalk Name 26=Set Mx10 Domain/Zone 27=Delete All Mx10 Jobs and Forms 28=Delete All Mx10 Fonts 29=The date is invalid or in the incorrect format.\nThe correct date format is dd-mm-yyyy. 30=The time is invalid or in the incorrect format.\nThe correct time format is hh:mm:ss. 31=text 32=database 33=spreadsheet [Trays] #CMyPropertyPage9 [Chooser] #CMyPropertyPage11 [ColorCal] 0=%%%%Title: Printer Target\n%%%%Creator: M Series Viewer v1.0\n%%%%For: SYSTEM\n%%%%EndComments\n%s(/docupres/ps/printcal.ps)run\n 1=%%%%Title: Scanner Target\n%%%%Creator: M Series Viewer v1.0\n%%%%For: SYSTEM\n%%%%EndComments\n%s(/docupres/ps/scancal.ps)run\n 2=%%CAI_CONTROL_TAG:RIP\n(/docupres/ps/printver.ps)run\n 3=%%CAI_CONTROL_TAG:CALIBRATE,0\n%%Title: Printer Calibration\n%%Creator: M Series Viewer v1.0\n%%For: SYSTEM\n%%EndComments\n 4=%%CAI_CONTROL_TAG:CALIBRATE,1\n%%Title: Scanner Calibration\n%%Creator: M Series Viewer v1.0\n%%For: SYSTEM\n%%EndComments\n 5=Press the "Print" button to print the Target. 6=< &Back 7=&Next > 8=Cancel 9=OK 10=&Print 11=&Reprint 12=Inspect the ColorCal target for errors. Press the "OK" button to confirm the target is OK. Press the "Reprint" button to print the target again. 13=Position the target page on the glass. Press the "Calibrate" button to calibrate the printer. 14=Position the target page on the glass. Press the "Calibrate" button to calibrate the scanner. 15=&Calibrate [Miscellaneous] 0=0 1=M Series Viewer v1.0 2=DPMainFrameClass 3=/docupres/upload/ENGSTAT2 4=/docupres/upload/JOBLIST 5=SOFTWARE\\Splash\\M Series Viewer v1.0\\ 6=Job Title 7=Date 8=Time 9=Job Owner 10=/docupres/upload/ACCOUNT 11=c:\\docupres\\client\\password 12=Couldn't write this file.\nThe file may be in use 13=Couldn't open this file.\nThe file may be in use 14=Splash 15=Queue 16=Spooling: 17=Page: 18=Copy: 19=Copies: 20=es 21=/dpbin/config/viewer/users/rights.%s 22=/dpbin/config/viewer/config/%s.%s 23=Splash M v1.0 24=hh:mm:ss tt 25=MM/dd/yy 26=OK 27=Empty 28=Currently Spooling %s Jobs 29=%s\n\n%s page %s\ncopy %s of %s 30=%s (KB) 31=(Mx10 not answering) [AppMessages] 0=Initializing Networks 1=Initializing Internal Data 2=Creating Main Windows 3=Checking to see if the Mx10 is present 4=Warning: Could not setup Timer.\nOther applications may run more slowly 5=The Mx10 is not responding.\nRe-select it, or select a new Mx10. 6=Couldn't connect to this printer.\nIt may not be an Mx10! 10=Initializing Copier Status Data 11=Initializing Job Detail Data 12=Initializing Tray and Paper Size Data [UserRights] 0=Operator 1=User 2=Administrator 3=No 4=Yes 5=The password is wrong. 10=17 11=view_pq_own,See own Print Queue Jobs 12=view_pq_others,See other users' Print Queue Jobs 13=view_pq_noown,See unowned Print Queue Jobs 14=reprint_pq_jobs,Reprint Print Queue Jobs 15=stop_pq_jobs,Stop Print Queue Jobs 16=del_pq_jobs,Delete Print Queue Jobs 17=move_pq_jobs,Move Jobs from Print to Hold Queue 18=view_hq_own,See own Hold Queue Jobs 19=view_hq_others,See other users' Hold Queue Jobs 20=view_hq_noown,See unowned Hold Queue Jobs 21=reprint_hq_jobs,Reprint Hold Queue Jobs 22=del_hq_jobs,Delete Hold Queue Jobs 23=move_hq_jobs,Move Jobs from Hold to Print Queue 24=pause_copier,Pause/Resume the Copier 25=accounting,Setup Accounting parameters 26=admin,Perform Administrative operations 27=passwords,Set Operator Password [CopierTypes] 0= 1=Unknown Copier 2=CLC-300/CLC-350 3=CLC-500/CLC-550 4=Xerox 5775 5=Xerox 5760 6=Xerox 5790 7=CLC-700 8=CLC-800 9=Xerox 5750 10=Ricoh 11=CLC-700 (AFS) 12=CLC-800 (AFS) 13=Xerox 5799 14=Xerox 5750 15=Xerox DC40 # The following entries are the engine part of the <engine>.<language> # filename that is used to retrieve reprint options from the rip # They should map to the names above with index += 100 100= 101= 102=clc300 103=clc500 104=5775 105=5760 106=5790 107=clc700 108=clc800 109=5750 110=ricoh 111=clc700c 112=clc800c 113=5799 114=5750 115=dc40 [CopierPauseStatus] 0= 1= 2=Pause Pending 3=Copier Paused 4=Disconnected [CopierPaperStrings] 0= 1=Add Manual Feed Paper: 2=Add Paper to Paper Tray: 3=Set Manual Feed Paper: 4=Insert Paper Tray: [CopierPaperSizeStrings] 0= 1=Manual Feed 2=A3 3=SEF A4 4=B4 5=SEF B5 6=A4 7=Tabloid 8=SEF Letter 9=Legal 10=Letter 11= [CD_PaperSizes] 0=Auto 1=Letter 2=Postcard 3=Legal 4=A4 5=B5 6=SEF Letter 7=Tabloid 8=B4 9=A3 10=SEF A4 11=A5 12=SEF A5 13=SEF B5 14=Folio 15=12x18 [CD_TrayNames] 0=Any Tray 1=Tray 1 2=Tray 2 3=Tray 3 4=Tray 4 5=Tray 5 6=Tray 6 7=Tray 7 8=Tray 8 9=Spare 10=HCF 2 11=HCF 1 12=Duplex Tray 13=Manual Feed 3 14=Manual Feed 2 15=Manual FeedDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.