1. cardwre2.zip Driver
2. FFS-SUP.TXT File Contents

FFS-SUP.TXT Driver File Contents (cardwre2.zip)

FFS-SUP.TXT
Release 06.05.94

This file describes how to support FLASH cards with CardWare.

CardWare is currently not shipped with a FLASH filing software.
Nevertheless CardWare supports the following FLASH File Systems (FFS):

1. Microsoft FFS-II
-------------------
   The FFS-II is not part of the CardWare package and must be purchased
   seperately from Microsoft.
   If you already own the FFS-II, install the MS-FLASH.SYS drive AFTER
   PCDISK.EXE in your CONFIG.SYS.
   Your CONFIG.SYS should look like this:

   DEVICE = C:\CARDWARE\ssxxxxxx.yyy
   DEVICE = C:\CARDWARE\PCCS.EXE
   DEVICE = C:\CARDWARE\PCRM.EXE /AUTODETECT
   DEVICE = C:\CARDWARE\PCENABLE.EXE
   DEVICE = C:\CARDWARE\PCDISK.EXE
   DEVICE = C:\CARDWARE\MS-FLASH.SYS

   Consult the documentation of the FFS for further information.
   CardWare can not read FLASH cards with the Write-Protect-Switch set to on.
   DOS will return the error message 'Invalid Media...'.
   So always set the WP-Switch to 'OFF'.


2. SCM FFS
----------
   The SCM FFS is not part of the CardWare package and must be purchased
   seperately.

                          SCM Vertriebs GmbH
                          Pettenkoferstr. 7
                          D-85276 Pfaffenhofen
                          Phone: +49/(0)8441/830 01
                          Fax:   +49/(0)8441/828 84

   If you already own the SCM FFS, REPLACE the PCDISK.EXE line in your CONFIG.SYS
   with the SWAPBOX.SYS line.
   Your CONFIG.SYS should look like this:

   DEVICE = C:\CARDWARE\ssxxxxxx.yyy
   DEVICE = C:\CARDWARE\PCCS.EXE
   DEVICE = C:\CARDWARE\PCRM.EXE /AUTODETECT
   DEVICE = C:\CARDWARE\PCENABLE.EXE
   DEVICE = C:\CARDWARE\SWAPBOX.SYS /c:4 /e

   Consult the documentation of the SCM FFS for further information.

3. Datalight FFS
----------------
   The Datalight FFS is not part of the CardWare package and must be purchased
   seperately.

                          Datalight
                          307 N. Olympic Ave Ste 201
                          Arlington, WA 98223
                          USA
                          Phone: +1/206-435-8086
                          Fax:   +1/206-435-0253

4. M-Systems FFS
----------------
   The M-Systems FFS is not part of the CardWare package and must be purchased
   seperately.

                          M-Systems
                          4655 Old Ironsides Drive
                          Santa Clara
                          USA
                          Phone: +1/408-654-5820
                          Fax:   +1/408-654-9107

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.