OEMSETUP.INF Driver File Contents (Lan.zip)

[Identification]
    OptionType = NetTransport
[Options]
    PACKET
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "service"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
Manufacturer    = "Microsoft"
ProductMajorVersion     = "3"
ProductMinorVersion     = "1"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName     = "Packet"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\packet.sys"

NetRuleSoftwareType     = "packet lmNetService ndisTransport"
NetRuleSoftwareClass    = {"rasCapableTransport netBiosTransport"}

NetRuleSoftwareUse      = $(SoftwareType)" yes yes"
NetRuleSoftwareBindForm = """Packet"" yes yes simple"

ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductSoftwareName)"\Parameters"
[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	goto returnoptions
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    Debug-Output "OEMNXPNB.INF: STF_CWDDIR is: "$(!STF_CWDDIR)
    Debug-Output "OEMNXPNB.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "OEMNXPNB.INF: ShellCode error: cannot get an error string."
	    goto ShellCodeError
	endif
	set Error = $($R0)
	set from = end
	set to = end
	goto nonfatalinfo
    else
	set StartLabel = installadapter
    endif
    set RadioDefault = 2
    set RadioIn = {$(RadioDefault)}
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	    $(ProductVersion)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error: cannot get an error string."
	    goto ShellCodeError
	endif
	goto end
    endif
    CloseRegKey $(KeyProduct)
    goto installproduct
installproduct = +
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
	Ifstr(i) $(DoCopy) == "YES"
	   Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	   Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       Goto ShellCodeError
	   Else-Ifstr(i) $($R0) == STATUS_FAILED
	       Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	       ifint $($ShellCode) != $(!SHELL_CODE_OK)
		   goto ShellCodeError
	       endif
	       set Error = $($R0)
	       Goto fatal
	   Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	       Goto successful
	   Endif
	   Set SrcDir = $($R1)
	Endif
	install "Install-Option"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	   Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif
	   set Error = $($R0)
	   goto fatal
	endif
	set OEM_ABANDON_ON = TRUE
	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareDisplayName), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "TDI", {}, "",+
	    $(NetEventDLL)
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) !=  NO_ERROR
	    EndWait
	    CloseRegKey $($R1)
	    CloseRegKey $($R2)
	    CloseRegKey $($R3)
	    CloseRegKey $($R4)
	    CloseRegKey $($R5)
	    goto fatalRegistry
	endif
	Set SoftProductKey      = $($R1)
	Set SoftNetRuleKey      = $($R2)
	Set SoftServiceKey      = $($R3)
	set KeyParameters       = $($R4)
	Set SoftLinkageKey      = $($R5)
	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
	set RegistryErrorIndex = $($R0)
	Ifstr $(RegistryErrorIndex) != NO_ERROR
	    CloseRegKey $(SoftProductKey)
	    CloseRegKey $(SoftNetRuleKey)
	    CloseRegKey $(SoftServiceKey)
	    CloseRegKey $(SoftLinkageKey)
	    CloseRegKey $(KeyParameters)
	    goto fatalRegistry
	endif
	set NewValueList = {{type    ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)}, +
			    {use     ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
	set RegistryErrorIndex = $($R0)
	Ifstr $(RegistryErrorIndex) != NO_ERROR
	    CloseRegKey $(SoftProductKey)
	    CloseRegKey $(SoftNetRuleKey)
	    CloseRegKey $(SoftServiceKey)
	    CloseRegKey $(SoftLinkageKey)
	    CloseRegKey $(KeyParameters)
	    goto fatalRegistry
	endif
	Set NewValueList = {{NbProvider,$(NoTitle),$(!REG_VT_SZ),"_nb"}}
	Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
	Ifstr $(RegistryErrorIndex) != NO_ERROR
	    CloseRegKey $(SoftProductKey)
	    CloseRegKey $(SoftNetRuleKey)
	    CloseRegKey $(SoftServiceKey)
	    CloseRegKey $(SoftLinkageKey)
	    goto fatalRegistry
	endif
	CloseRegKey $(SoftProductKey)
	CloseRegKey $(SoftNetRuleKey)
	CloseRegKey $(SoftServiceKey)
	CloseRegKey $(SoftLinkageKey)
    endif
    goto writeparameters
writeparameters = +
    CloseRegKey $(KeyParameters)
    EndWait
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	$(ProductSoftwareName)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Debug-Output "ShellCode error"
	goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	goto fatalregistry
    endif
    goto end
UpgradeSoftware = +
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) != $(KeyNull)
	    GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
	    set Version = *($(VersionInfo), 4)
	    Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "ShellCode error"
		goto ShellCodeError
	    endif
	    set !UG_Filename = $($R0)
	    ifstr(i) $(!UG_Filename) != ""
		install "Install-Update"
		ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		    goto fatal
		endif
	    endif
	    SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	    SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	    ifint $(Version) != $(ProductVersion)
	    endif
	    CloseRegKey $(KeyProduct)
	else
	    goto fatalregistry
	endif
    endif
    goto end
successful = +
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText) 
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto removeadapter
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
	AddSectionFilesToCopyList Files-App $(SrcDir) $(!STF_WINDOWSSYSPATH)
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-App $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
    1  = "Windows NT Setup Disk #1" 
    2  = "Windows NT Setup CD-ROM Disk" 
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
2,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-PACKET]
2,packet.SYS , SIZE=999
[Files-App]
2,packet32.dll , SIZE=999
[LanguagesSupported]
    ENG
[OptionsTextENG]
    NDISPERF     = "NDIS 3.0 Packet Driver v3.5"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "Packet Driver"
ProductSoftwareDescription      = "Microsoft NDIS Packet Driver"
ProductSoftwareDisplayName = "Ndis 3.0 Packet Driver"
ProductSoftwareTitle    = "Ndis 3.0 Packet Driver"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"
[FileDependentDlgENG]
GroupLabel = "Optimization:"
Radio1 = "&Minimize Memory Used"
Radio2 = "&Balance"
Radio3 = "M&aximize Throughput && Connections"
DlgType = "Radio"               
DlgTemplate = "NBF"             
Caption = $(FunctionTitle)
OptionsGreyed = {}
HelpContext = $(!IDH_DB_OEMNXPNB_INS)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.04