README.TXT Driver File Contents (r566drv.zip)

                 Macronix International Co., Ltd.
                NetWare DOS ODI Driver Installation
              =======================================

        Copyright (C) 1996 by Macronix International Co., Ltd.
        All rights reserved.


NetWare DOS ODI Workstation Driver Installation (NetWare v3.xx & v4.xx)
-----------------------------------------------------------------------
This section describes the procedure to install
the NetWare v3.11 workstation driver for your adapter.

Requirements:
-------------
Macronix Driver Diskette

Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the adapter is properly installed and configured. Make sure
that your NetWare operating system is properly installed.

1. Run the following command in the order given below and
   press <Enter>:

   LSL
   MX32ODI
   IPXODI
   NETX (or VLM)

2. You can now log into your network.

Installation notes:
-------------------

1. Remember to specify LASTDRIVE=Z in the CONFIG.SYS file.

2. Edit the NET.CFG if you want to change some parameters.

   For example, if you're using a NetWare 3.11 workstation and
   wants to log into a NetWare v4.X  server. The default
   frame type of NetWare 3.11 is Ethernet 802.3, while that of
   NetWare v4.X  is Ethernet 802.2. Before you can log into
   the NetWare v4.X , make sure there is a protocol binding
   for Ethernet 802.3 in the server's NET.CFG file.

   This is normally included in the [MLID] section. A sample
   NET.CFG file is given below:

        Link SUPPORT
        buffers 8 1514
        mempool 4096

        link driver MX32MLID
        frame Ethernet_802.2
        frame Ethernet_802.3
        frame Ethernet_II
        frame Ethernet_snap

Note:
   There is another customer specific function,10FD(10HD),100FD(100HD),
   and AUTO.
   If you want the driver to run in full-duplex mode, you may specify
   10FD or 100FD in the NET.CFG file. The default mode is AUTO.
   The driver will display information about FD(FullDuplex) or HD(HalfDuplex)
   when you load the driver.
   
---
All trademarks and brand names mentioned belong to their
respective owners.


-- THE END --

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.21