AMECFG.INI Driver File Contents (V5_3_2.zip)

[AccessConcentrators]

[OPTIONAL_PROPERTIES]
IpHeaderCompression=No
DSLTestTool=No

[Driver Section]
ModemType=USB
RFC1483=Yes
PPPoA=yes
PPPoE=yes
RFC1483_Bridged=yes
RFC1483_Routed=yes

[ISP 1]
ISP Name=ADSL ISP
Vpi=0
Vci=33
Framing=LLC
Status=Active

[ISP 2]
ISP Name=ADSL ISP
Vpi=0
Vci=33
Framing=LLC
Status=Inactive

[INSTALL SCREENS]
WelcomeWindow=On
LicenseWindow=On
ReadmeWindow=On
SelectRFC1483OrPPPoAWindow=On
EnterVpiVciValues=On
FramingWindow=On
SelectBridgedOrRoutedWindow=On
IpConfigWindow=On
FinishWindow=On

[IP]
IPAddress=0.0.0.0
IPMask=255.255.255.255
IPGateway=0.0.0.0
PrimDNS=0.0.0.0
;SecDNS=0.0.0.0
HostName=MyHost
IPGatewayInc=2
DHCP=No

[LED FUNCTIONALITY]
NoOfModemStates=9
NoOfLeds=4
NoOfConfigParameters=4

[Modem State 0]
 Active=On
 State Description = Power Off
 LED0 = Blink, 500, SW, NULL
 LED1 = NULL, NULL, NULL, NULL
 LED2 = NULL, NULL, NULL, NULL
 LED3 = NULL, NULL, NULL, NULL

[Modem State 1]
 Active=On
 State Description = Downloading Firmware
 LED0 = NULL, NULL, NULL, NULL
 LED1 = Blink, 500, SW, NULL
 LED2 = NULL, NULL, NULL, NULL
 LED3 = NULL, NULL, NULL, NULL

[Modem State 2]
 Active=On
 State Description = Idle(Closed)
 LED0 = NULL, NULL, NULL, NULL
 LED1 = NULL, NULL, NULL, NULL
 LED2 = Blink, 500, SW, NULL
 LED3 = NULL, NULL, NULL, NULL

[Modem State 3]
 Active=On 
 State Description = Initializing(State 0x08)
 LED0 = NULL, NULL, NULL, NULL
 LED1 = NULL, NULL, NULL, NULL
 LED2 = NULL, NULL, NULL, NULL
 LED3 = Blink, 500, SW, NULL

[Modem State 4]
 Active=on
 State Description = Initializing( 0x10)
 LED0 = Blink, 500, SW, NULL
 LED1 = Blink, 500, SW, NULL
 LED2 = NULL, NULL, NULL, NULL
 LED3 = NULL, NULL, NULL, NULL

[Modem State 5]
 Active=On
 State Description = Showtime-No Rx Data Passing/No Tx Data Passing
 LED0 = Blink, 500, SW, NULL
 LED1 = Blink, 500, SW, NULL
 LED2 = Blink, 500, SW, NULL
 LED3 = Blink, 500, SW, NULL

[Modem State 6]
 Active=Off
 State Description = Showtime- No Rx Data Transferred/No Tx Data Passing
 LED0 = Off, NULL, NULL, NULL
 LED1 = Off, NULL, NULL, NULL
 LED2 = Off, NULL, NULL, NULL
 LED3 = Off, NULL, NULL, NULL

[Modem State 7]
 Active=Off
 State Description = Showtime- Rx Data Passing/No Tx Data Passing
 LED0 = Off, NULL, NULL, NULL
 LED1 = Off, NULL, NULL, NULL
 LED2 = Off, NULL, NULL, NULL
 LED3 = Off, NULL, NULL, NULL

[Modem State 8]
 Active=Off
 State Description = Signal_Lost
 LED0 = Off, NULL, NULL, NULL
 LED1 = Off, NULL, NULL, NULL
 LED2 = Off, NULL, NULL, NULL
 LED3 = Off, NULL, NULL, NULL
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.39